wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Vasilis Tsiligiannis 39fc8e6d08 [package] qos-scripts: Fix generation of IMQ firewall rules on halfduplex mode (#7800 ) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23227 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-10-04 21:25:48 +00:00
docs	…
include	[include] correct default package status info (install -> unknown) - fixes "opkg_conf_write_status_files: Internal error: package ... has a NULL dest"	2010-10-04 17:20:49 +00:00
package	[package] qos-scripts: Fix generation of IMQ firewall rules on halfduplex mode (#7800 )	2010-10-04 21:25:48 +00:00
scripts	[scripts] feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	2010-10-02 02:37:27 +00:00
target	kernel: fix some build warnings with kernel 2.6.36	2010-10-04 20:43:07 +00:00
toolchain	[toolchain]: gcc 4.4.5 support	2010-10-04 12:21:58 +00:00
tools	[tools] mtd-utils: refresh patches again	2010-10-03 12:15:04 +00:00
.gitignore	…
BSDmakefile	…
Config.in	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	…
feeds.conf.default	…
rules.mk	[buildroot] drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org