wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Lars-Peter Clausen 39483a0cb0 [kirkwood] Iomega iConnect Wireless platform support This patch adds support for Iomega iConnect Wireless. Leds and wireless card support are still missing. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23217 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-10-04 09:19:52 +00:00
docs	…
include	[kernel] update 2.6.35.x to 2.6.35.7	2010-10-04 07:42:32 +00:00
package	[packages] kernel: Add hwmon-lm63 package	2010-10-04 09:17:42 +00:00
scripts	[scripts] feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	2010-10-02 02:37:27 +00:00
target	[kirkwood] Iomega iConnect Wireless platform support	2010-10-04 09:19:52 +00:00
toolchain	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
tools	[tools] mtd-utils: refresh patches again	2010-10-03 12:15:04 +00:00
.gitignore	…
BSDmakefile	…
Config.in	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
LICENSE	…
Makefile	…
README	…
feeds.conf.default	…
rules.mk	…

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org