Hauke Mehrtens 7c4a6af247 broadcom-diag: support for the WNDR3700v3 ... I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36482 3c298f89-4303-0410-b956-a3cf2f4a3e73		2013-04-28 21:11:17 +00:00
..
src	broadcom-diag: support for the WNDR3700v3	2013-04-28 21:11:17 +00:00
Makefile	[package] broadcom-diag: SimpleShare: expose power button as reset to the system, remove actual reset button - it's hardwired and will reset the SoC (#7928)	2010-09-13 01:35:39 +00:00