262 lines
6.4 KiB
Diff
262 lines
6.4 KiB
Diff
From 881200420e6ece87d9abbb13c0653d26455cdbdd Mon Sep 17 00:00:00 2001
|
|
From: Kumar Gala <galak@codeaurora.org>
|
|
Date: Wed, 28 May 2014 12:09:53 -0500
|
|
Subject: [PATCH 092/182] ARM: dts: qcom: Update msm8960 device trees
|
|
|
|
* Move SoC peripherals into an SoC container node
|
|
* Move serial enabling into board file (qcom-msm8960-cdp.dts)
|
|
* Cleanup cpu node to match binding spec, enable-method and compatible
|
|
should be per cpu, not part of the container
|
|
* Drop interrupts property from l2-cache node as its not part of the
|
|
binding spec
|
|
* Add GSBI node and configuration of GSBI controller
|
|
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 10 ++
|
|
arch/arm/boot/dts/qcom-msm8960.dtsi | 176 ++++++++++++++++++--------------
|
|
2 files changed, 108 insertions(+), 78 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
|
|
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
|
|
@@ -3,4 +3,14 @@
|
|
/ {
|
|
model = "Qualcomm MSM8960 CDP";
|
|
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
|
|
+
|
|
+ soc {
|
|
+ gsbi@16400000 {
|
|
+ status = "ok";
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ serial@16440000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
|
|
@@ -3,6 +3,7 @@
|
|
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8960";
|
|
@@ -13,10 +14,10 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <1 14 0x304>;
|
|
- compatible = "qcom,krait";
|
|
- enable-method = "qcom,kpss-acc-v1";
|
|
|
|
cpu@0 {
|
|
+ compatible = "qcom,krait";
|
|
+ enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
@@ -25,6 +26,8 @@
|
|
};
|
|
|
|
cpu@1 {
|
|
+ compatible = "qcom,krait";
|
|
+ enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
@@ -35,7 +38,6 @@
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
- interrupts = <0 2 0x4>;
|
|
};
|
|
};
|
|
|
|
@@ -45,91 +47,109 @@
|
|
qcom,no-pc-write;
|
|
};
|
|
|
|
- intc: interrupt-controller@2000000 {
|
|
- compatible = "qcom,msm-qgic2";
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <3>;
|
|
- reg = < 0x02000000 0x1000 >,
|
|
- < 0x02002000 0x1000 >;
|
|
- };
|
|
+ soc: soc {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ compatible = "simple-bus";
|
|
+
|
|
+ intc: interrupt-controller@2000000 {
|
|
+ compatible = "qcom,msm-qgic2";
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <3>;
|
|
+ reg = <0x02000000 0x1000>,
|
|
+ <0x02002000 0x1000>;
|
|
+ };
|
|
|
|
- timer@200a000 {
|
|
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
|
- interrupts = <1 1 0x301>,
|
|
- <1 2 0x301>,
|
|
- <1 3 0x301>;
|
|
- reg = <0x0200a000 0x100>;
|
|
- clock-frequency = <27000000>,
|
|
- <32768>;
|
|
- cpu-offset = <0x80000>;
|
|
- };
|
|
+ timer@200a000 {
|
|
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
|
+ interrupts = <1 1 0x301>,
|
|
+ <1 2 0x301>,
|
|
+ <1 3 0x301>;
|
|
+ reg = <0x0200a000 0x100>;
|
|
+ clock-frequency = <27000000>,
|
|
+ <32768>;
|
|
+ cpu-offset = <0x80000>;
|
|
+ };
|
|
|
|
- msmgpio: gpio@800000 {
|
|
- compatible = "qcom,msm-gpio";
|
|
- gpio-controller;
|
|
- #gpio-cells = <2>;
|
|
- ngpio = <150>;
|
|
- interrupts = <0 16 0x4>;
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <2>;
|
|
- reg = <0x800000 0x4000>;
|
|
- };
|
|
+ msmgpio: gpio@800000 {
|
|
+ compatible = "qcom,msm-gpio";
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ ngpio = <150>;
|
|
+ interrupts = <0 16 0x4>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ reg = <0x800000 0x4000>;
|
|
+ };
|
|
|
|
- gcc: clock-controller@900000 {
|
|
- compatible = "qcom,gcc-msm8960";
|
|
- #clock-cells = <1>;
|
|
- #reset-cells = <1>;
|
|
- reg = <0x900000 0x4000>;
|
|
- };
|
|
+ gcc: clock-controller@900000 {
|
|
+ compatible = "qcom,gcc-msm8960";
|
|
+ #clock-cells = <1>;
|
|
+ #reset-cells = <1>;
|
|
+ reg = <0x900000 0x4000>;
|
|
+ };
|
|
|
|
- clock-controller@4000000 {
|
|
- compatible = "qcom,mmcc-msm8960";
|
|
- reg = <0x4000000 0x1000>;
|
|
- #clock-cells = <1>;
|
|
- #reset-cells = <1>;
|
|
- };
|
|
+ clock-controller@4000000 {
|
|
+ compatible = "qcom,mmcc-msm8960";
|
|
+ reg = <0x4000000 0x1000>;
|
|
+ #clock-cells = <1>;
|
|
+ #reset-cells = <1>;
|
|
+ };
|
|
|
|
- acc0: clock-controller@2088000 {
|
|
- compatible = "qcom,kpss-acc-v1";
|
|
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
- };
|
|
+ acc0: clock-controller@2088000 {
|
|
+ compatible = "qcom,kpss-acc-v1";
|
|
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
+ };
|
|
|
|
- acc1: clock-controller@2098000 {
|
|
- compatible = "qcom,kpss-acc-v1";
|
|
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
- };
|
|
+ acc1: clock-controller@2098000 {
|
|
+ compatible = "qcom,kpss-acc-v1";
|
|
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
+ };
|
|
|
|
- saw0: regulator@2089000 {
|
|
- compatible = "qcom,saw2";
|
|
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
- regulator;
|
|
- };
|
|
+ saw0: regulator@2089000 {
|
|
+ compatible = "qcom,saw2";
|
|
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
+ regulator;
|
|
+ };
|
|
|
|
- saw1: regulator@2099000 {
|
|
- compatible = "qcom,saw2";
|
|
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
- regulator;
|
|
- };
|
|
+ saw1: regulator@2099000 {
|
|
+ compatible = "qcom,saw2";
|
|
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
+ regulator;
|
|
+ };
|
|
|
|
- serial@16440000 {
|
|
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
- reg = <0x16440000 0x1000>,
|
|
- <0x16400000 0x1000>;
|
|
- interrupts = <0 154 0x0>;
|
|
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
|
- clock-names = "core", "iface";
|
|
- };
|
|
+ gsbi5: gsbi@16400000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x16400000 0x100>;
|
|
+ clocks = <&gcc GSBI5_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+
|
|
+ serial@16440000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x16440000 0x1000>,
|
|
+ <0x16400000 0x1000>;
|
|
+ interrupts = <0 154 0x0>;
|
|
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
|
|
- qcom,ssbi@500000 {
|
|
- compatible = "qcom,ssbi";
|
|
- reg = <0x500000 0x1000>;
|
|
- qcom,controller-type = "pmic-arbiter";
|
|
- };
|
|
+ qcom,ssbi@500000 {
|
|
+ compatible = "qcom,ssbi";
|
|
+ reg = <0x500000 0x1000>;
|
|
+ qcom,controller-type = "pmic-arbiter";
|
|
+ };
|
|
|
|
- rng@1a500000 {
|
|
- compatible = "qcom,prng";
|
|
- reg = <0x1a500000 0x200>;
|
|
- clocks = <&gcc PRNG_CLK>;
|
|
- clock-names = "core";
|
|
+ rng@1a500000 {
|
|
+ compatible = "qcom,prng";
|
|
+ reg = <0x1a500000 0x200>;
|
|
+ clocks = <&gcc PRNG_CLK>;
|
|
+ clock-names = "core";
|
|
+ };
|
|
};
|
|
};
|