146 lines
4.1 KiB
Diff
146 lines
4.1 KiB
Diff
From a2f0fc20ea49e5dbbdbb21444683ea760fbdd38f Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Thu, 24 Apr 2014 11:31:21 -0500
|
|
Subject: [PATCH 084/182] soc: qcom: Add GSBI driver
|
|
|
|
The GSBI (General Serial Bus Interface) driver controls the overarching
|
|
configuration of the shared serial bus infrastructure on APQ8064, IPQ8064, and
|
|
earlier QCOM processors. The GSBI supports UART, I2C, SPI, and UIM
|
|
functionality in various combinations.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
drivers/soc/Kconfig | 2 +
|
|
drivers/soc/Makefile | 5 +++
|
|
drivers/soc/qcom/Kconfig | 11 ++++++
|
|
drivers/soc/qcom/Makefile | 1 +
|
|
drivers/soc/qcom/qcom_gsbi.c | 84 ++++++++++++++++++++++++++++++++++++++++++
|
|
5 files changed, 103 insertions(+)
|
|
create mode 100644 drivers/soc/Makefile
|
|
create mode 100644 drivers/soc/qcom/Kconfig
|
|
create mode 100644 drivers/soc/qcom/Makefile
|
|
create mode 100644 drivers/soc/qcom/qcom_gsbi.c
|
|
|
|
--- a/drivers/soc/Kconfig
|
|
+++ b/drivers/soc/Kconfig
|
|
@@ -1,3 +1,5 @@
|
|
menu "SOC (System On Chip) specific Drivers"
|
|
|
|
+source "drivers/soc/qcom/Kconfig"
|
|
+
|
|
endmenu
|
|
--- /dev/null
|
|
+++ b/drivers/soc/Makefile
|
|
@@ -0,0 +1,5 @@
|
|
+#
|
|
+# Makefile for the Linux Kernel SOC specific device drivers.
|
|
+#
|
|
+
|
|
+obj-$(CONFIG_ARCH_QCOM) += qcom/
|
|
--- /dev/null
|
|
+++ b/drivers/soc/qcom/Kconfig
|
|
@@ -0,0 +1,11 @@
|
|
+#
|
|
+# QCOM Soc drivers
|
|
+#
|
|
+config QCOM_GSBI
|
|
+ tristate "QCOM General Serial Bus Interface"
|
|
+ depends on ARCH_QCOM
|
|
+ help
|
|
+ Say y here to enable GSBI support. The GSBI provides control
|
|
+ functions for connecting the underlying serial UART, SPI, and I2C
|
|
+ devices to the output pins.
|
|
+
|
|
--- /dev/null
|
|
+++ b/drivers/soc/qcom/Makefile
|
|
@@ -0,0 +1 @@
|
|
+obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
|
|
--- /dev/null
|
|
+++ b/drivers/soc/qcom/qcom_gsbi.c
|
|
@@ -0,0 +1,84 @@
|
|
+/*
|
|
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License rev 2 and
|
|
+ * only rev 2 as published by the free Software foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/of_platform.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#define GSBI_CTRL_REG 0x0000
|
|
+#define GSBI_PROTOCOL_SHIFT 4
|
|
+
|
|
+static int gsbi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *node = pdev->dev.of_node;
|
|
+ struct resource *res;
|
|
+ void __iomem *base;
|
|
+ struct clk *hclk;
|
|
+ u32 mode, crci = 0;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ base = devm_ioremap_resource(&pdev->dev, res);
|
|
+ if (IS_ERR(base))
|
|
+ return PTR_ERR(base);
|
|
+
|
|
+ if (of_property_read_u32(node, "qcom,mode", &mode)) {
|
|
+ dev_err(&pdev->dev, "missing mode configuration\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ /* not required, so default to 0 if not present */
|
|
+ of_property_read_u32(node, "qcom,crci", &crci);
|
|
+
|
|
+ dev_info(&pdev->dev, "GSBI port protocol: %d crci: %d\n", mode, crci);
|
|
+
|
|
+ hclk = devm_clk_get(&pdev->dev, "iface");
|
|
+ if (IS_ERR(hclk))
|
|
+ return PTR_ERR(hclk);
|
|
+
|
|
+ clk_prepare_enable(hclk);
|
|
+
|
|
+ writel_relaxed((mode << GSBI_PROTOCOL_SHIFT) | crci,
|
|
+ base + GSBI_CTRL_REG);
|
|
+
|
|
+ /* make sure the gsbi control write is not reordered */
|
|
+ wmb();
|
|
+
|
|
+ clk_disable_unprepare(hclk);
|
|
+
|
|
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
|
|
+}
|
|
+
|
|
+static const struct of_device_id gsbi_dt_match[] = {
|
|
+ { .compatible = "qcom,gsbi-v1.0.0", },
|
|
+};
|
|
+
|
|
+MODULE_DEVICE_TABLE(of, gsbi_dt_match);
|
|
+
|
|
+static struct platform_driver gsbi_driver = {
|
|
+ .driver = {
|
|
+ .name = "gsbi",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = gsbi_dt_match,
|
|
+ },
|
|
+ .probe = gsbi_probe,
|
|
+};
|
|
+
|
|
+module_platform_driver(gsbi_driver);
|
|
+
|
|
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
|
|
+MODULE_DESCRIPTION("QCOM GSBI driver");
|
|
+MODULE_LICENSE("GPL v2");
|