OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Geoff Levand 309494bee5 PS3: Add some HID quirks to the PS3 kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-10 01:07:44 +00:00
docs [package] configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include [kernel] bump to 2.6.29.6 and refresh patches 2009-07-05 15:08:56 +00:00
package package/lua: implement memory limits, scripts can use get_memory_limit() and set_memory_limit() to cap the maximum ram usage 2009-07-09 17:45:23 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to 2009-06-08 21:17:58 +00:00
target PS3: Add some HID quirks to the PS3 kernel config 2009-07-10 01:07:44 +00:00
toolchain [toolchain] uClibc: fix build error on ARM targets (closes #5473) 2009-07-07 15:09:10 +00:00
tools [tools] firmware-utils/mktplinkfw: add option for combined images 2009-07-08 08:17:26 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00
LICENSE
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default [feeds] switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org