hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/generic/files/drivers/net/phy/b53
History
Hauke Mehrtens fe902ca051 b53: hardcode reset GPIO for Linksys WRT300N 1.1 
According to the thread https://forum.openwrt.org/viewtopic.php?id=48281
b53 uses GPIO 7:
[    4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7
and causes device to self-reboot. GPIO 8 was found in CFE boot log:
"Reset switch via GPIO 8 ..."

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 		2014-07-06 11:40:51 +00:00
..
Kconfig kernel: b53: add Register Access Bridge Registers (SRAB) interface 2013-09-25 21:44:28 +00:00
Makefile kernel: b53: add Register Access Bridge Registers (SRAB) interface 2013-09-25 21:44:28 +00:00
b53_common.c b53: Make b53_switch_init static 2014-02-22 11:16:58 +00:00
b53_mdio.c b53: Add BCM53128 switch support 2014-02-22 11:16:56 +00:00
b53_mmap.c b53: use drvdata to store driver data 2014-01-20 20:01:22 +00:00
b53_phy_fixup.c kernel: b53: support phy ids for BCM5365 2013-09-05 20:30:34 +00:00
b53_priv.h b53: hardcode reset GPIO for Linksys WRT300N 1.1 2014-07-06 11:40:51 +00:00
b53_regs.h kernel: b53: fix untagged shift for BCM5365 2013-11-13 18:04:39 +00:00
b53_spi.c b53: use drvdata to store driver data 2014-01-20 20:01:22 +00:00
b53_srab.c b53: use drvdata to store driver data 2014-01-20 20:01:22 +00:00