227 lines
5.4 KiB
Diff
227 lines
5.4 KiB
Diff
--- a/arch/arm/mach-kirkwood/Makefile
|
|
+++ b/arch/arm/mach-kirkwood/Makefile
|
|
@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
|
|
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
|
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
|
obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
|
+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
|
|
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
|
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
|
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
|
--- a/arch/arm/mach-kirkwood/Kconfig
|
|
+++ b/arch/arm/mach-kirkwood/Kconfig
|
|
@@ -130,6 +130,12 @@ config MACH_T5325
|
|
Say 'Y' here if you want your kernel to support the
|
|
HP t5325 Thin Client.
|
|
|
|
+config MACH_ICONNECT
|
|
+ bool "Iomega iConnect Wireless"
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support the
|
|
+ Iomega iConnect Wireless.
|
|
+
|
|
endmenu
|
|
|
|
endif
|
|
--- a/arch/arm/mach-kirkwood/mpp.h
|
|
+++ b/arch/arm/mach-kirkwood/mpp.h
|
|
@@ -108,6 +108,7 @@
|
|
#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
|
|
|
|
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
|
|
+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1, 1 )
|
|
#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
|
|
#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
|
|
#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
|
|
@@ -0,0 +1,188 @@
|
|
+/*
|
|
+ * arch/arm/mach-kirkwood/iconnect-setup.c
|
|
+ *
|
|
+ * Iomega iConnect Wireless
|
|
+ *
|
|
+ * This file is licensed under the terms of the GNU General Public
|
|
+ * License version 2. This program is licensed "as is" without any
|
|
+ * warranty of any kind, whether express or implied.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+#include <linux/mv643xx_eth.h>
|
|
+#include <linux/ethtool.h>
|
|
+#include <linux/gpio.h>
|
|
+#include <linux/gpio_keys.h>
|
|
+#include <linux/input.h>
|
|
+#include <linux/leds.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <mach/kirkwood.h>
|
|
+#include "common.h"
|
|
+#include "mpp.h"
|
|
+
|
|
+static struct mtd_partition iconnect_nand_parts[] = {
|
|
+ {
|
|
+ .name = "u-boot",
|
|
+ .offset = 0,
|
|
+ .size = SZ_1M
|
|
+ }, {
|
|
+ .name = "uImage",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = SZ_1M + SZ_2M
|
|
+ }, {
|
|
+ .name = "rootfs",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = SZ_32M,
|
|
+ }, {
|
|
+ .name = "data",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
|
|
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
|
|
+};
|
|
+
|
|
+static struct gpio_led iconnect_led_pins[] = {
|
|
+ {
|
|
+ .name = "iconnect:blue:power",
|
|
+ .default_trigger = "default-on",
|
|
+ .gpio = 42,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:red:power",
|
|
+ .gpio = 43,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:blue:usb1",
|
|
+ .gpio = 44,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:blue:usb2",
|
|
+ .gpio = 45,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:blue:usb3",
|
|
+ .gpio = 46,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:blue:usb4",
|
|
+ .gpio = 47,
|
|
+ },
|
|
+ {
|
|
+ .name = "iconnect:blue:otb",
|
|
+ .gpio = 48,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct gpio_led_platform_data iconnect_led_data = {
|
|
+ .leds = iconnect_led_pins,
|
|
+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
|
|
+};
|
|
+
|
|
+static struct platform_device iconnect_leds = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .platform_data = &iconnect_led_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+#define ICONNECT_GPIO_KEY_RESET 12
|
|
+#define ICONNECT_GPIO_KEY_OTB 35
|
|
+
|
|
+#define ICONNECT_SW_RESET 0x00
|
|
+#define ICONNECT_SW_OTB 0x01
|
|
+
|
|
+static struct gpio_keys_button iconnect_buttons[] = {
|
|
+ {
|
|
+ .type = EV_SW,
|
|
+ .code = ICONNECT_SW_RESET,
|
|
+ .gpio = ICONNECT_GPIO_KEY_RESET,
|
|
+ .desc = "Reset Button",
|
|
+ .active_low = 1,
|
|
+ .debounce_interval = 100,
|
|
+ },
|
|
+ {
|
|
+ .type = EV_SW,
|
|
+ .code = ICONNECT_SW_OTB,
|
|
+ .gpio = ICONNECT_GPIO_KEY_OTB,
|
|
+ .desc = "OTB Button",
|
|
+ .active_low = 1,
|
|
+ .debounce_interval = 100,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct gpio_keys_platform_data iconnect_button_data = {
|
|
+ .buttons = iconnect_buttons,
|
|
+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
|
|
+};
|
|
+
|
|
+static struct platform_device iconnect_button_device = {
|
|
+ .name = "gpio-keys",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &iconnect_button_data,
|
|
+ },
|
|
+};
|
|
+
|
|
+static unsigned int iconnect_mpp_config[] __initdata = {
|
|
+ MPP12_GPIO, /*Input for reset button*/
|
|
+ MPP35_GPIO, /*Input for OTB button*/
|
|
+ MPP42_GPIO,
|
|
+ MPP43_GPIO,
|
|
+ MPP44_GPIO,
|
|
+ MPP45_GPIO,
|
|
+ MPP46_GPIO,
|
|
+ MPP47_GPIO,
|
|
+ MPP48_GPIO,
|
|
+ 0
|
|
+};
|
|
+
|
|
+static void __init iconnect_init(void)
|
|
+{
|
|
+ u32 dev, rev;
|
|
+
|
|
+ /*
|
|
+ * Basic setup. Needs to be called early.
|
|
+ */
|
|
+ kirkwood_init();
|
|
+ kirkwood_mpp_conf(iconnect_mpp_config);
|
|
+
|
|
+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
|
|
+ kirkwood_ehci_init();
|
|
+
|
|
+ kirkwood_ge00_init(&iconnect_ge00_data);
|
|
+ kirkwood_pcie_id(&dev, &rev);
|
|
+
|
|
+ kirkwood_uart0_init();
|
|
+ kirkwood_i2c_init();
|
|
+
|
|
+ platform_device_register(&iconnect_leds);
|
|
+ platform_device_register(&iconnect_button_device);
|
|
+}
|
|
+
|
|
+static int __init iconnect_pci_init(void)
|
|
+{
|
|
+ if (machine_is_iconnect())
|
|
+ kirkwood_pcie_init(KW_PCIE0);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+subsys_initcall(iconnect_pci_init);
|
|
+
|
|
+
|
|
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
|
|
+ .boot_params = 0x00000100,
|
|
+ .init_machine = iconnect_init,
|
|
+ .map_io = kirkwood_map_io,
|
|
+ .init_irq = kirkwood_init_irq,
|
|
+ .timer = &kirkwood_timer,
|
|
+MACHINE_END
|