wifipineapple-openwrt/target/linux/lantiq/dts/FRITZ3370.dts

269 lines
5.0 KiB
Plaintext

/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "FRITZ3370 - Fritz!Box WLAN 3370";
chosen {
bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "gen_nand", "lantiq,nand-xway";
bank-width = <2>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "rootfs_ubi";
reg = <0x400000 0x3000000>;
};
partition@3400000 {
label = "vr9_firmware";
reg = <0x3400000 0x400000>;
};
partition@3800000 {
label = "reserved";
reg = <0x3800000 0x3000000>;
};
partition@6800000 {
label = "config";
reg = <0x6800000 0x200000>;
};
partition@6a00000 {
label = "nand-filesystem";
reg = <0x6a00000 0x1600000>;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
spi {
lantiq,groups = "spi", "spi_cs4";
lantiq,function = "gpio";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
nand {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand cs1", "nand rdy";
lantiq,function = "ebu";
lantiq,pull = <1>;
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gpios = <&gpio 37 0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
gpios = <&gpio 44 0>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 5 0
&gpio 14 0>;
lantiq,portmask = <0x3>;
};
};
spi {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-gpio";
gpio-miso = <&gpio 16 0>;
gpio-mosi = <&gpio 17 0>;
gpio-sck = <&gpio 18 0>;
num-chipselects = <1>;
cs-gpios = <&gpio 10 1>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l2005a";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l2005a";
spi-max-frequency = <1000000>;
ath9k_cal: partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "tffs (1)";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "tffs (2)";
read-only;
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,eep-endian;
ath,eep-swap;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&gpio 1 0>;
linux,code = <0x100>;
};
/* wifi {
label = "wifi";
gpios = <&gpio 29 0>;
linux,code = <0x101>;
};*/
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio 32 1>;
};
power2 {
label = "power2";
gpios = <&gpio 33 1>;
};
info_red {
label = "info_red";
gpios = <&gpio 34 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 35 1>;
};
dsl {
label = "dsl";
gpios = <&gpio 36 1>;
};
lan {
label = "lan";
gpios = <&gpio 38 1>;
};
info_green {
label = "info_green";
gpios = <&gpio 47 1>;
};
};
};