258 lines
6.5 KiB
Diff
258 lines
6.5 KiB
Diff
--- a/arch/arm/configs/ixp4xx_defconfig
|
|
+++ b/arch/arm/configs/ixp4xx_defconfig
|
|
@@ -155,6 +155,7 @@ CONFIG_MACH_AVILA=y
|
|
CONFIG_MACH_LOFT=y
|
|
CONFIG_ARCH_ADI_COYOTE=y
|
|
CONFIG_MACH_GATEWAY7001=y
|
|
+CONFIG_MACH_WG302V1=y
|
|
CONFIG_MACH_WG302V2=y
|
|
CONFIG_ARCH_IXDP425=y
|
|
CONFIG_MACH_IXDPG425=y
|
|
--- a/arch/arm/mach-ixp4xx/Kconfig
|
|
+++ b/arch/arm/mach-ixp4xx/Kconfig
|
|
@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
|
|
7001 Access Point. For more information on this platform,
|
|
see http://openwrt.org
|
|
|
|
+config MACH_WG302V1
|
|
+ bool "Netgear WG302 v1 / WAG302 v1"
|
|
+ select PCI
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support Netgear's
|
|
+ WG302 v1 or WAG302 v1 Access Points. For more information
|
|
+ on this platform, see http://openwrt.org
|
|
+
|
|
config MACH_WG302V2
|
|
bool "Netgear WG302 v2 / WAG302 v2"
|
|
select PCI
|
|
--- a/arch/arm/mach-ixp4xx/Makefile
|
|
+++ b/arch/arm/mach-ixp4xx/Makefile
|
|
@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
|
|
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
|
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
|
|
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
|
+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
|
|
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
|
|
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
|
|
|
|
@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
|
|
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
|
|
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
|
|
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
|
+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
|
|
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
|
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
|
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
|
|
@@ -0,0 +1,64 @@
|
|
+/*
|
|
+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
|
|
+ *
|
|
+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
|
|
+ *
|
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * based on coyote-pci.c:
|
|
+ * Copyright (C) 2002 Jungo Software Technologies.
|
|
+ * Copyright (C) 2003 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+#include <mach/hardware.h>
|
|
+
|
|
+#include <asm/mach/pci.h>
|
|
+
|
|
+void __init wg302v1_pci_preinit(void)
|
|
+{
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
|
|
+
|
|
+ ixp4xx_pci_preinit();
|
|
+}
|
|
+
|
|
+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
+{
|
|
+ if (slot == 1)
|
|
+ return IRQ_IXP4XX_GPIO8;
|
|
+ else if (slot == 2)
|
|
+ return IRQ_IXP4XX_GPIO10;
|
|
+ else
|
|
+ return -1;
|
|
+}
|
|
+
|
|
+struct hw_pci wg302v1_pci __initdata = {
|
|
+ .nr_controllers = 1,
|
|
+ .preinit = wg302v1_pci_preinit,
|
|
+ .swizzle = pci_std_swizzle,
|
|
+ .setup = ixp4xx_setup,
|
|
+ .scan = ixp4xx_scan_bus,
|
|
+ .map_irq = wg302v1_map_irq,
|
|
+};
|
|
+
|
|
+int __init wg302v1_pci_init(void)
|
|
+{
|
|
+ if (machine_is_wg302v1())
|
|
+ pci_common_init(&wg302v1_pci);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+subsys_initcall(wg302v1_pci_init);
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
|
|
@@ -0,0 +1,142 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
|
|
+ *
|
|
+ * Board setup for the Netgear WG302 v1 and WAG302 v1
|
|
+ *
|
|
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * based on coyote-setup.c:
|
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Author: Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/memory.h>
|
|
+
|
|
+#include <asm/setup.h>
|
|
+#include <mach/hardware.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+static struct flash_platform_data wg302v1_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource wg302v1_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device wg302v1_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &wg302v1_flash_data,
|
|
+ },
|
|
+ .num_resources = 1,
|
|
+ .resource = &wg302v1_flash_resource,
|
|
+};
|
|
+
|
|
+static struct resource wg302v1_uart_resources[] = {
|
|
+ {
|
|
+ .start = IXP4XX_UART1_BASE_PHYS,
|
|
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct plat_serial8250_port wg302v1_uart_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART1,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device wg302v1_uart = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev = {
|
|
+ .platform_data = wg302v1_uart_data,
|
|
+ },
|
|
+ .num_resources = 2,
|
|
+ .resource = wg302v1_uart_resources,
|
|
+};
|
|
+
|
|
+static struct eth_plat_info wg302v1_plat_eth[] = {
|
|
+ {
|
|
+ .phy = 30,
|
|
+ .rxq = 3,
|
|
+ .txreadyq = 20,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device wg302v1_eth[] = {
|
|
+ {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEB,
|
|
+ .dev.platform_data = wg302v1_plat_eth,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device *wg302v1_devices[] __initdata = {
|
|
+ &wg302v1_flash,
|
|
+ &wg302v1_uart,
|
|
+ &wg302v1_eth[0],
|
|
+};
|
|
+
|
|
+static void __init wg302v1_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
|
+
|
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
|
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
|
+
|
|
+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_MACH_WG302V1
|
|
+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
|
|
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .boot_params = 0x0100,
|
|
+ .init_machine = wg302v1_init,
|
|
+MACHINE_END
|
|
+#endif
|