hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/ar71xx/patches-3.6/605-MIPS-ath79-db120-fixes....

210 lines
5.7 KiB
Diff
Raw Blame History

--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -2,7 +2,7 @@
* Atheros DB120 reference board support
*
* Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -19,16 +19,26 @@
*/
#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
-#include "machtypes.h"
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
-#include "pci.h"
+#include "machtypes.h"
+#define DB120_GPIO_LED_USB 11
#define DB120_GPIO_LED_WLAN_5G 12
#define DB120_GPIO_LED_WLAN_2G 13
#define DB120_GPIO_LED_STATUS 14
@@ -39,8 +49,10 @@
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
+#define DB120_MAC0_OFFSET 0
+#define DB120_MAC1_OFFSET 6
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led db120_leds_gpio[] __initdata = {
{
@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
.gpio = DB120_GPIO_LED_WLAN_2G,
.active_low = 1,
},
+ {
+ .name = "db120:green:usb",
+ .gpio = DB120_GPIO_LED_USB,
+ .active_low = 1,
+ }
};
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
},
};
-static struct ath79_spi_controller_data db120_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
-static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
- .controller_data = &db120_spi0_data,
- }
+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
+ .led_ctrl0 = 0x00000000,
+ .led_ctrl1 = 0xc737c737,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00c30c00,
+ .open_drain = true,
};
-static struct ath79_spi_platform_data db120_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
+static struct ar8327_platform_data db120_ar8327_data = {
+ .pad0_cfg = &db120_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &db120_ar8327_led_cfg,
};
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data db120_ath9k_data;
-
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &db120_ath9k_data;
- break;
- }
-
- return 0;
-}
-
-static void __init db120_pci_init(u8 *eeprom)
-{
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
- sizeof(db120_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void db120_pci_init(void) {}
-#endif /* CONFIG_PCI */
+static struct mdio_board_info db120_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &db120_ar8327_data,
+ },
+};
static void __init db120_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
+ ath79_register_m25p80(NULL);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
db120_leds_gpio);
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
ARRAY_SIZE(db120_gpio_keys),
db120_gpio_keys);
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
ath79_register_usb();
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(db120_mdio0_info,
+ ARRAY_SIZE(db120_mdio0_info));
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ ath79_register_nfc();
}
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Reference in New Issue View Git Blame Copy Permalink