wifipineapple-openwrt/obsolete-buildroot/make/gcc-uclibc-2.95.mk

277 lines
9.8 KiB
Makefile

# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
ifeq ($(GCC_2_95_TOOLCHAIN),true)
GCC_SITE:=http://www.uclibc.org/downloads/toolchain
GCC_SOURCE:=gcc-20011006.tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-20011006
GCC_CAT:=bzcat
STLPORT_SITE=http://www.stlport.org/archive
STLPORT_SOURCE=STLport-4.5.3.tar.gz
STLPORT_DIR=$(TOOL_BUILD_DIR)/STLport-4.5.3
GCC_STRIP_HOST_BINARIES:=true
#############################################################
#
# Setup some initial stuff
#
#############################################################
ifeq ($(INSTALL_LIBSTDCPP),true)
TARGET_LANGUAGES:=c,c++
STLPORT_TARGET=stlport
else
TARGET_LANGUAGES:=c
STLPORT_TARGET=
endif
#############################################################
#
# build the first pass gcc compiler
#
#############################################################
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc2_95-initial
$(DL_DIR)/$(GCC_SOURCE):
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-mega.patch.bz2
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-uclibc-conf.patch
#$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc2_95*.patch
#
# We do not wish to build the libstdc++ library provided with gcc,
# since it doesn't seem to work at all with uClibc plus gcc 2.95...
#
mv $(GCC_DIR)/libstdc++ $(GCC_DIR)/libstdc++.orig
mv $(GCC_DIR)/libio $(GCC_DIR)/libio.orig
#
touch $(GCC_DIR)/.patched
# The --without-headers option stopped working with gcc 3.0 and has never been
# # fixed, so we need to actually have working C library header files prior to
# # the step or libgcc will not build...
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
mkdir -p $(GCC_BUILD_DIR1)
-mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
# Important! Required for limits.h to be fixed.
ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=c \
--disable-shared \
--includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
--with-headers=$(TOOL_BUILD_DIR)/uClibc_dev/usr/include \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
touch $(GCC_BUILD_DIR1)/.compiled
$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
#rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
#rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
gcc2_95_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
gcc2_95_initial-clean:
rm -rf $(GCC_BUILD_DIR1)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc2_95_initial-dirclean:
rm -rf $(GCC_BUILD_DIR1)
#############################################################
#
# STLport -- an alternative C++ library
#
#############################################################
STLPORT_PATCH=$(SOURCE_DIR)/STLport-4.5.3.patch
$(DL_DIR)/$(STLPORT_SOURCE):
$(WGET) -P $(DL_DIR) $(STLPORT_SITE)/$(STLPORT_SOURCE)
$(STLPORT_DIR)/Makefile: $(DL_DIR)/$(STLPORT_SOURCE) $(STLPORT_PATCH)
zcat $(DL_DIR)/$(STLPORT_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
cat $(STLPORT_PATCH) | patch -d $(STLPORT_DIR) -p1
$(STLPORT_DIR)/lib/libstdc++.a: $(STLPORT_DIR)/Makefile
$(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR)
$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a: $(STLPORT_DIR)/lib/libstdc++.a
$(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR) install
stlport: $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a
stlport-source: $(DL_DIR)/$(STLPORT_SOURCE)
stlport-clean:
rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++*
-$(MAKE) -C $(STLPORT_DIR) clean
stlport-dirclean:
rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/g++-v3*
rm -rf $(STLPORT_DIR)
#############################################################
#
# second pass compiler build. Build the compiler targeting
# the newly built shared uClibc library.
#
#############################################################
GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc2_95-final
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
mkdir -p $(GCC_BUILD_DIR2)
(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
# Strip the host binaries
ifeq ($(GCC_STRIP_HOST_BINARIES),true)
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
endif
# Set up the symlinks to enable lying about target name.
set -e; \
(cd $(STAGING_DIR); \
ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
cd bin; \
for app in $(REAL_GNU_TARGET_NAME)-* ; do \
ln -sf $${app} \
$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
done; \
);
touch $(GCC_BUILD_DIR2)/.installed
gcc2_95: uclibc-configured binutils gcc2_95_initial $(LIBFLOAT_TARGET) uclibc \
$(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS) $(STLPORT_TARGET)
gcc2_95-source: $(DL_DIR)/$(GCC_SOURCE)
gcc2_95-clean:
rm -rf $(GCC_BUILD_DIR2)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc2_95-dirclean:
rm -rf $(GCC_BUILD_DIR2)
#############################################################
#
# Next build target gcc compiler
#
#############################################################
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc2_95-target
$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
mkdir -p $(GCC_BUILD_DIR3)
(cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=/usr \
--build=$(GNU_HOST_NAME) \
--host=$(REAL_GNU_TARGET_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--with-gxx-include-dir=/usr/include/c++ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR3)/.configured
$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
PATH=$(TARGET_PATH) \
$(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
touch $(GCC_BUILD_DIR3)/.compiled
$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
PATH=$(TARGET_PATH) \
$(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
# Remove broken specs file (cross compile flag is set).
rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
-(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
#
rm -f $(TARGET_DIR)/usr/lib/*.la*
#rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
# $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
# Work around problem of missing syslimits.h
cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
# These are in /lib, so...
#rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
#touch -c $(TARGET_DIR)/usr/bin/gcc
gcc2_95_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
gcc2_95_target-clean:
rm -rf $(GCC_BUILD_DIR3)
rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc2_95_target-dirclean:
rm -rf $(GCC_BUILD_DIR3)
endif