wifipineapple-openwrt/target/linux/ar71xx/patches-3.14/730-MIPS-ath79-add-DHP-1565...

41 lines
1.5 KiB
Diff

--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -40,6 +40,7 @@ enum ath79_mach_type {
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -293,6 +293,17 @@ config ATH79_MACH_WPE72
select ATH79_DEV_USB
select MYLOADER
+config ATH79_MACH_DHP_1565_A1
+ bool "D-Link DHP-1565 rev. A1 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_DIR_505_A1
bool "D-Link DIR-505-A1 support"
select SOC_AR933X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o