wifipineapple-openwrt/target/linux/s3c24xx/patches-2.6.24/1215-From-119f4e02ba81cffe4...

323 lines
9.3 KiB
Diff

From e2303161c93a90b966679b84c18838398b847d2c Mon Sep 17 00:00:00 2001
From: Andrzej Zaborowski <balrog@zabor.org>
Date: Wed, 2 Jul 2008 22:44:22 +0100
Subject: [PATCH] From 119f4e02ba81cffe4dbc88d8ff667048ad28d925 Mon Sep 17 00:00:00 2001
Subject: [PATCH] Hacky CONFIG_NO_IDLE_HZ (dyn-tick) support for S3C24xx.
---
arch/arm/plat-s3c24xx/time.c | 247 +++++++++++++++++++++++++++++++++++-------
1 files changed, 209 insertions(+), 38 deletions(-)
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 39fc33d..42d7111 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -3,6 +3,8 @@
* Copyright (C) 2003-2005 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
*
+ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -44,6 +46,9 @@ static unsigned long timer_startval;
static unsigned long timer_usec_ticks;
static struct work_struct resume_work;
+unsigned long pclk;
+struct clk *clk;
+
#define TIMER_USEC_SHIFT 16
/* we use the shifted arithmetic to work out the ratio of timer ticks
@@ -180,11 +185,7 @@ static void s3c2410_timer_setup (void)
tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
} else {
- unsigned long pclk;
- struct clk *clk;
-
- /* for the h1940 (and others), we use the pclk from the core
- * to generate the timer values. since values around 50 to
+ /* since values around 50 to
* 70MHz are not values we can directly generate the timer
* value from, we need to pre-scale and divide before using it.
*
@@ -192,20 +193,7 @@ static void s3c2410_timer_setup (void)
* (8.45 ticks per usec)
*/
- /* this is used as default if no other timer can be found */
-
- clk = clk_get(NULL, "timers");
- if (IS_ERR(clk))
- panic("failed to get clock for system timer");
-
- clk_enable(clk);
-
- pclk = clk_get_rate(clk);
-
- printk("pclk = %lu\n", pclk);
-
/* configure clock tick */
-
timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
@@ -216,11 +204,6 @@ static void s3c2410_timer_setup (void)
tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
tcnt = (pclk / 6) / HZ;
-
- /* start the timer running */
- tcon |= S3C2410_TCON_T4START | S3C2410_TCON_T4RELOAD;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
- __raw_writel(tcon, S3C2410_TCON);
}
/* timers reload after counting zero, so reduce the count by 1 */
@@ -262,27 +245,37 @@ static void s3c2410_timer_setup (void)
}
+struct sys_timer s3c24xx_timer;
static void timer_resume_work(struct work_struct *work)
{
- s3c2410_timer_setup();
-}
-
-/* ooh a nasty situation arises if we try to call s3c2410_timer_setup() from
- * the resume handler. It is called in atomic context but the clock APIs
- * try to lock a mutex which may sleep. We are in a bit of an unusual
- * situation because we don't have a tick source right now, but it should be
- * okay to try to schedule a work item... hopefully
- */
-
-static void s3c2410_timer_resume_atomic(void)
-{
- int ret = schedule_work(&resume_work);
- if (!ret)
- printk(KERN_INFO"Failed to schedule_work tick ctr (%d)\n", ret);
+ clk_enable(clk);
+
+#ifdef CONFIG_NO_IDLE_HZ
+ if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
+ s3c24xx_timer.dyn_tick->enable();
+ else
+#endif
+ s3c2410_timer_setup();
}
static void __init s3c2410_timer_init (void)
{
+ if (!use_tclk1_12()) {
+ /* for the h1940 (and others), we use the pclk from the core
+ * to generate the timer values.
+ */
+
+ /* this is used as default if no other timer can be found */
+ clk = clk_get(NULL, "timers");
+ if (IS_ERR(clk))
+ panic("failed to get clock for system timer");
+
+ clk_enable(clk);
+
+ pclk = clk_get_rate(clk);
+ printk("pclk = %lu\n", pclk);
+ }
+
INIT_WORK(&resume_work, timer_resume_work);
s3c2410_timer_setup();
setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
@@ -304,8 +297,186 @@ static void s3c2410_timer_resume(void)
"s3c2410_timer_resume_work already queued ???\n");
}
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * We'll set a constant prescaler so we don't have to bother setting it
+ * when reprogramming and so that we avoid costly divisions.
+ *
+ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
+ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
+ */
+#define INPUT_FREQ_SHIFT 9
+
+static int ticks_last;
+static int ticks_left;
+static uint32_t tcnto_last;
+
+static inline int s3c24xx_timer_read(void)
+{
+ uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
+
+ /*
+ * WARNING: sometimes we get called before TCNTB has been
+ * loaded into the counter and TCNTO then returns its previous
+ * value and kill us, so don't do anything before counter is
+ * reloaded.
+ */
+ if (unlikely(tcnto == tcnto_last))
+ return ticks_last;
+
+ tcnto_last = -1;
+ return tcnto <<
+ ((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
+}
+
+static inline void s3c24xx_timer_program(int ticks)
+{
+ uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
+ uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
+
+ /* Just make sure the timer is stopped. */
+ __raw_writel(tcon, S3C2410_TCON);
+
+ /* TODO: add likely()ies / unlikely()ies */
+ if (ticks >> 18) {
+ ticks_last = min(ticks, 0xffff << 3);
+ ticks_left = ticks - ticks_last;
+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
+ __raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
+ } else if (ticks >> 17) {
+ ticks_last = ticks;
+ ticks_left = 0;
+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
+ __raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
+ } else if (ticks >> 16) {
+ ticks_last = ticks;
+ ticks_left = 0;
+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
+ __raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
+ } else {
+ ticks_last = ticks;
+ ticks_left = 0;
+ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
+ __raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
+ }
+
+ tcnto_last = __raw_readl(S3C2410_TCNTO(4));
+ __raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
+ S3C2410_TCON);
+ __raw_writel(tcon | S3C2410_TCON_T4START,
+ S3C2410_TCON);
+}
+
+/*
+ * If we have already waited all the time we were supposed to wait,
+ * kick the timer, setting the longest allowed timeout value just
+ * for time-keeping.
+ */
+static inline void s3c24xx_timer_program_idle(void)
+{
+ s3c24xx_timer_program(0xffff << 3);
+}
+
+static inline void s3c24xx_timer_update(int restart)
+{
+ int ticks_cur = s3c24xx_timer_read();
+ int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
+ int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
+
+ if (restart) {
+ if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
+ s3c24xx_timer_program(ticks_left);
+ else
+ s3c24xx_timer_program_idle();
+ ticks_last += subjiffy;
+ } else
+ ticks_last = subjiffy;
+
+ while (jiffies_elapsed --)
+ timer_tick();
+}
+
+/* Called when the timer expires. */
+static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
+{
+ tcnto_last = -1;
+ s3c24xx_timer_update(1);
+
+ return IRQ_HANDLED;
+}
+
+/* Called to update jiffies with time elapsed. */
+static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
+{
+ s3c24xx_timer_update(0);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. The CPU goes
+ * to sleep directly after this.
+ */
+static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
+{
+ int subjiffy_left = ticks_last - s3c24xx_timer_read();
+
+ s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
+ ticks_last += subjiffy_left;
+}
+
+static unsigned long s3c24xx_timer_offset_dyn_tick(void)
+{
+ /* TODO */
+ return 0;
+}
+
+static int s3c24xx_timer_enable_dyn_tick(void)
+{
+ /* Set our constant prescaler. */
+ uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
+ int prescaler =
+ max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
+
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+ tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
+ __raw_writel(tcfg0, S3C2410_TCFG0);
+
+ /* Override handlers. */
+ s3c2410_timer_irq.handler = s3c24xx_timer_handler;
+ s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
+
+ printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
+ "%li Hz pclk with prescaler %i\n", pclk, prescaler);
+
+ s3c24xx_timer_program_idle();
+
+ return 0;
+}
+
+static int s3c24xx_timer_disable_dyn_tick(void)
+{
+ s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
+ s3c24xx_timer.offset = s3c2410_gettimeoffset;
+ s3c2410_timer_setup();
+
+ return 0;
+}
+
+static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
+ .enable = s3c24xx_timer_enable_dyn_tick,
+ .disable = s3c24xx_timer_disable_dyn_tick,
+ .reprogram = s3c24xx_timer_reprogram_dyn_tick,
+ .handler = s3c24xx_timer_handler_dyn_tick,
+};
+#endif /* CONFIG_NO_IDLE_HZ */
+
struct sys_timer s3c24xx_timer = {
.init = s3c2410_timer_init,
.offset = s3c2410_gettimeoffset,
.resume = s3c2410_timer_resume,
+#ifdef CONFIG_NO_IDLE_HZ
+ .dyn_tick = &s3c24xx_dyn_tick_timer,
+#endif
};
--
1.5.6.5