OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Imre Kaloz 1b53267e76 enable the second uart on the WG302v1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-31 11:14:00 +00:00
docs Update wireless documentation 2008-07-26 18:20:45 +00:00
include allow packages to forcibly disable the svn/git mirror downloading attempt by setting PKG_SOURCE_MIRROR:=0 (#3815) 2008-07-31 02:43:33 +00:00
package sync ath9k with latest git code 2008-07-31 09:51:31 +00:00
scripts generate zImage for the ADI Sidewinder, too 2008-07-22 06:15:07 +00:00
target enable the second uart on the WG302v1 2008-07-31 11:14:00 +00:00
toolchain Disable smash stacking support by default, but allow to enable it as an experimental feature 2008-07-30 12:54:28 +00:00
tools fix mkfwimage to recognize the -s option 2008-07-28 20:48:06 +00:00
.gitignore update svn:ignore and .gitignore 2008-06-06 19:04:01 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine 2008-06-09 15:38:45 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf adds luci to the feeds.conf file 2008-07-28 17:12:52 +00:00
rules.mk Native toolchain does not support -fhonour-copts, do not add it to the TARGET_CFLAGS 2008-07-19 16:29:01 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org