wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Hauke Mehrtens 19f8b8ff70 kernel: add dummy net device Thank you Thomas Jansen. (partly closes #5849) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24272 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-12-05 21:23:21 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	[include] re-enable the libtool PKG_BUILD_DEPENDS for PKG_FIXUP and emit a deprecation warning. Packages must specify PKG_BUILD_DEPENDS:=libtool	2010-12-04 19:56:47 +00:00
package	kernel: add dummy net device	2010-12-05 21:23:21 +00:00
scripts	switch from ext2 to ext4 (w/o) journaling	2010-11-22 12:12:39 +00:00
target	ramips: add support for 2.6.36	2010-12-05 20:14:38 +00:00
toolchain	[target/mpc85xx]: preliminary support for Freescale MPC85xx based boards	2010-12-05 11:38:59 +00:00
tools	brcm47xx: Add edimax PS1208mfg support	2010-12-02 21:27:54 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[feeds] switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	remove an obsolete comment for the flock template	2010-10-31 15:36:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org