74 lines
2.4 KiB
Diff
74 lines
2.4 KiB
Diff
These are some hackish patches to make the Ethernet driver work somehow
|
|
on this arm core.
|
|
The flash driver is not working, so we removed the nvram reading, this
|
|
should be changed after we have a flash driver.
|
|
The mdelay(1) is a ugly workaround for this arm chip, this seams to be a dma problem.
|
|
|
|
The PHY says it is not connected by default, just ignore it.
|
|
|
|
--- a/drivers/net/ethernet/broadcom/Kconfig
|
|
+++ b/drivers/net/ethernet/broadcom/Kconfig
|
|
@@ -132,7 +132,7 @@ config BNX2X_SRIOV
|
|
|
|
config BGMAC
|
|
tristate "BCMA bus GBit core support"
|
|
- depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
|
|
+ depends on BCMA_HOST_SOC && HAS_DMA
|
|
select PHYLIB
|
|
---help---
|
|
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
|
|
--- a/drivers/net/ethernet/broadcom/bgmac.c
|
|
+++ b/drivers/net/ethernet/broadcom/bgmac.c
|
|
@@ -17,7 +17,11 @@
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_data/b53.h>
|
|
+#ifdef CONFIG_BCM47XX
|
|
#include <bcm47xx_nvram.h>
|
|
+#else
|
|
+#define bcm47xx_nvram_getenv(a, b, c) -1
|
|
+#endif
|
|
|
|
static const struct bcma_device_id bgmac_bcma_tbl[] = {
|
|
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
|
|
@@ -1438,7 +1442,7 @@ static int bgmac_probe(struct bcma_devic
|
|
int err;
|
|
|
|
/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
|
|
- if (core->core_unit > 1) {
|
|
+ if (core->core_unit > 0) {
|
|
pr_err("Unsupported core_unit %d\n", core->core_unit);
|
|
return -ENOTSUPP;
|
|
}
|
|
@@ -1473,8 +1477,7 @@ static int bgmac_probe(struct bcma_devic
|
|
}
|
|
bgmac->cmn = core->bus->drv_gmac_cmn.core;
|
|
|
|
- bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
|
|
- sprom->et0phyaddr;
|
|
+ bgmac->phyaddr = BGMAC_PHY_NOREGS; // core->core_unit ? sprom->et1phyaddr : sprom->et0phyaddr;
|
|
bgmac->phyaddr &= BGMAC_PHY_MASK;
|
|
if (bgmac->phyaddr == BGMAC_PHY_MASK) {
|
|
bgmac_err(bgmac, "No PHY found\n");
|
|
@@ -1526,8 +1529,7 @@ static int bgmac_probe(struct bcma_devic
|
|
/* TODO: reset the external phy. Specs are needed */
|
|
bgmac_phy_reset(bgmac);
|
|
|
|
- bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
|
|
- BGMAC_BFL_ENETROBO);
|
|
+ bgmac->has_robosw = 1;
|
|
if (bgmac->has_robosw)
|
|
bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
|
|
|
|
--- a/drivers/net/phy/phy_device.c
|
|
+++ b/drivers/net/phy/phy_device.c
|
|
@@ -814,7 +814,7 @@ int genphy_update_link(struct phy_device
|
|
return status;
|
|
|
|
if ((status & BMSR_LSTATUS) == 0)
|
|
- phydev->link = 0;
|
|
+ phydev->link = 1;
|
|
else
|
|
phydev->link = 1;
|
|
|