wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Felix Fietkau 1798277ca3 ath9k: add a locking fix that might prevent random memory corruption during hardware resets git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23542 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-10-20 00:46:37 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	[include] netfilter: workaround a userspace/kernel mismatch on Linux 2.6.35 and later	2010-10-18 20:39:07 +00:00
package	ath9k: add a locking fix that might prevent random memory corruption during hardware resets	2010-10-20 00:46:37 +00:00
scripts	Fix typo	2010-10-18 21:43:50 +00:00
target	Revert "[brcm47xx] Add support for cores with slow WDT clock (bcm5354)"	2010-10-19 07:07:10 +00:00
toolchain	[toolchain]: gcc 4.4.5 support	2010-10-04 12:21:58 +00:00
tools	tools/mtd-utils: add two upstream patches	2010-10-15 07:52:37 +00:00
.gitignore	…
BSDmakefile	…
Config.in	as we only support 2.6, remove the useless bool for it	2010-10-05 14:19:00 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	…
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	[buildroot] Add two debug rules the examine the values of runtime make variables.	2010-10-10 22:40:44 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org