wifipineapple-openwrt/target/linux/ar71xx/base-files/etc/uci-defaults/leds

157 lines
3.0 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
COMMIT_SYSTEM=0
set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
COMMIT_SYSTEM=1
}
set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
COMMIT_SYSTEM=1
}
set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
COMMIT_SYSTEM=1
}
set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
COMMIT_SYSTEM=1
}
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
case "$board" in
rb750)
set_led_default "act" "act" "rb750:green:act" "1"
set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
;;
dir-825-b1)
set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1"
;;
hornet-ub)
set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
mzk-w04u)
set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
;;
nbg460n_550n_550nh)
set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
;;
om2p)
set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
;;
tl-mr3220 | \
tl-mr3420 )
set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
tl-wr741nd-v4 | \
tl-wr941nd)
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr1043nd)
set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
wrt160nl)
set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
;;
wndr3700)
set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
;;
wzr-hp-g300nh)
set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
;;
zcn-1523h-2)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
;;
zcn-1523h-5)
set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
;;
esac
[ "$COMMIT_SYSTEM" == "1" ] && uci commit system
exit 0