wifipineapple-openwrt/target/linux/rb532/image/Makefile

75 lines
2.2 KiB
Makefile

#
# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
LOADADDR = 0x81000000 # RAM start + 16M
KERNEL_ENTRY = 0x80101000
RAMSIZE = 0x00100000 # 1MB
IMAGE_COPY = 1
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE) \
IMAGE_COPY=$(IMAGE_COPY)
define Build/Clean
$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
endef
define Image/Prepare
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
endef
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-kernel
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-initramfs
endif
define Image/BuildKernel
$(CP) $(KDIR)/loader.elf $(VMLINUX)
endef
define Image/cmdline/jffs2-64k
block2mtd.block2mtd=/dev/sda2,65536 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/jffs2-128k
block2mtd.block2mtd=/dev/sda2,131072 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/ext2
root=/dev/sda2 rootfstype=ext2
endef
define Image/cmdline/squashfs
block2mtd.block2mtd=/dev/sda2,65536 root=/dev/mtdblock0 rootfstype=squashfs
endef
define Image/cmdline/yaffs2
root=/dev/mtdblock1 rootfstype=yaffs2
endef
define Image/Build
$(CP) $(KDIR)/vmlinux.elf $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel
$(STAGING_DIR_HOST)/bin/patch-cmdline $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel '$(strip $(call Image/cmdline/$(1))) '
./gen_image.sh $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).bin 4 $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
endef
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
define Image/Prepare
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux '$(strip $(call Image/cmdline/yaffs2)) '
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
endef
endif
$(eval $(call BuildImage))