hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/package/mac80211/patches/560-ath9k_fix_radio_stop.patch

276 lines
7.0 KiB
Diff
Raw Blame History

--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -124,14 +124,14 @@ void ath9k_ps_restore(struct ath_softc *
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
- PS_WAIT_FOR_TX_ACK)))
+ PS_WAIT_FOR_TX_ACK))) {
mode = ATH9K_PM_NETWORK_SLEEP;
- else
- goto unlock;
- spin_lock(&common->cc_lock);
- ath_hw_cycle_counters_update(common);
- spin_unlock(&common->cc_lock);
+ spin_lock(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ spin_unlock(&common->cc_lock);
+ } else
+ goto unlock;
ath9k_hw_setpower(sc->sc_ah, mode);
@@ -880,82 +880,6 @@ chip_reset:
#undef SCHED_INTR
}
-static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
- spin_lock_bh(&sc->sc_pcu_lock);
- atomic_set(&ah->intr_ref_cnt, -1);
-
- ath9k_hw_configpcipowersave(ah, false);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(common,
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath_complete_reset(sc, true);
-
- /* Enable LED */
- ath9k_hw_cfg_output(ah, ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
-
- ath9k_ps_restore(sc);
-}
-
-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
-
- ath_cancel_work(sc);
-
- spin_lock_bh(&sc->sc_pcu_lock);
-
- /*
- * Keep the LED on when the radio is disabled
- * during idle unassociated state.
- */
- if (!sc->ps_idle) {
- ath9k_hw_set_gpio(ah, ah->led_pin, 1);
- ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
- }
-
- ath_prepare_reset(sc, false, true);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(ath9k_hw_common(sc->sc_ah),
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath9k_hw_phy_disable(ah);
-
- ath9k_hw_configpcipowersave(ah, true);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
- ath9k_ps_restore(sc);
-}
-
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
int r;
@@ -1091,6 +1015,9 @@ static int ath9k_start(struct ieee80211_
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
+
+ atomic_set(&ah->intr_ref_cnt, -1);
+
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
@@ -1129,6 +1056,16 @@ static int ath9k_start(struct ieee80211_
goto mutex_unlock;
}
+ ath9k_hw_cfg_output(ah, ah->led_pin,
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+ ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+
+ /*
+ * Reset key cache to sane defaults (all entries cleared) instead of
+ * semi-random values after suspend/resume.
+ */
+ ath9k_cmn_init_crypto(sc->sc_ah);
+
spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@@ -1260,9 +1197,6 @@ static void ath9k_stop(struct ieee80211_
sc->rx.frag = NULL;
}
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(ah);
-
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
@@ -1271,10 +1205,27 @@ static void ath9k_stop(struct ieee80211_
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
- ath9k_ps_restore(sc);
-
sc->ps_idle = true;
- ath_radio_disable(sc, hw);
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+
+ ath_prepare_reset(sc, false, true);
+
+ if (!ah->curchan)
+ ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+
+ ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+ ath9k_hw_phy_disable(ah);
+ ath9k_hw_disable(ah);
+
+ ath9k_hw_configpcipowersave(ah, true);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ ath9k_ps_restore(sc);
sc->sc_flags |= SC_OP_INVALID;
@@ -1598,8 +1549,8 @@ static int ath9k_config(struct ieee80211
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
- bool disable_radio = false;
+ ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
/*
@@ -1608,16 +1559,8 @@ static int ath9k_config(struct ieee80211
* of the changes. Likewise we must only disable the radio towards
* the end.
*/
- if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (changed & IEEE80211_CONF_CHANGE_IDLE)
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
- if (!sc->ps_idle) {
- ath_radio_enable(sc, hw);
- ath_dbg(common, ATH_DBG_CONFIG,
- "not-idle: enabling radio\n");
- } else {
- disable_radio = true;
- }
- }
/*
* We just prepare to enable PS. We have to wait until our AP has
@@ -1742,19 +1685,13 @@ static int ath9k_config(struct ieee80211
ath_dbg(common, ATH_DBG_CONFIG,
"Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
- ath9k_ps_wakeup(sc);
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
- ath9k_ps_restore(sc);
conf->cur_power_level = sc->curtxpow / 2;
}
- if (disable_radio) {
- ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
- ath_radio_disable(sc, hw);
- }
-
mutex_unlock(&sc->mutex);
+ ath9k_ps_restore(sc);
return 0;
}
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -302,26 +302,12 @@ static void ath_pci_remove(struct pci_de
static int ath_pci_suspend(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
-
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
- /* The device has to be moved to FULLSLEEP forcibly.
- * Otherwise the chip never moved to full sleep,
- * when no interface is up.
- */
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
-
return 0;
}
static int ath_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
u32 val;
/*
@@ -333,22 +319,6 @@ static int ath_pci_resume(struct device
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- ath9k_ps_wakeup(sc);
- /* Enable LED */
- ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-
- /*
- * Reset key cache to sane defaults (all entries cleared) instead of
- * semi-random values after suspend/resume.
- */
- ath9k_cmn_init_crypto(sc->sc_ah);
- ath9k_ps_restore(sc);
-
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
-
return 0;
}
Reference in New Issue View Git Blame Copy Permalink