Daniel Dickinson 7b9da8d0b0 [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-12-08 00:40:31 +00:00
..
base-files	[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.	2010-12-07 15:15:54 +00:00
files/arch/mips/include/asm/mach-bcm63xx	tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120	2010-04-14 00:45:48 +00:00
image	[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.	2010-12-07 15:15:54 +00:00
patches-2.6.35	[brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.	2010-12-07 17:32:29 +00:00
profiles	[brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.	2010-12-08 00:40:31 +00:00
Makefile	[brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.	2010-12-08 00:40:28 +00:00
base-files.mk	bcm63xx: Add defconfigs.	2010-11-28 22:04:19 +00:00
config-2.6.35	[brcm63xx] restore kernel oldconfig	2010-10-17 14:09:24 +00:00
modules.mk	massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950	2010-07-12 14:06:13 +00:00