wifipineapple-openwrt/target/linux/generic/patches-2.6.32/975-ssb_update.patch

2933 lines
102 KiB
Diff

--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -3,7 +3,7 @@
* Broadcom ChipCommon core driver
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
if (!ccdev)
return;
bus = ccdev->bus;
+
+ /* We support SLOW only on 6..9 */
+ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
+ mode = SSB_CLKMODE_DYNAMIC;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return; /* PMU controls clockmode, separated function needed */
+ SSB_WARN_ON(ccdev->id.revision >= 20);
+
/* chipcommon cores prior to rev6 don't support dynamic clock control */
if (ccdev->id.revision < 6)
return;
- /* chipcommon cores rev10 are a whole new ball game */
+
+ /* ChipCommon cores rev10+ need testing */
if (ccdev->id.revision >= 10)
return;
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
switch (mode) {
- case SSB_CLKMODE_SLOW:
+ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
break;
case SSB_CLKMODE_FAST:
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ if (ccdev->id.revision < 10) {
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
+ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ /* udelay(150); TODO: not available in early init */
+ }
break;
case SSB_CLKMODE_DYNAMIC:
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
-
- /* for dynamic control, we have to release our xtal_pu "force on" */
- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ if (ccdev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
+ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+
+ /* For dynamic control, we have to release our xtal_pu
+ * "force on" */
+ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ }
break;
default:
SSB_WARN_ON(1);
@@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str
}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
+static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ case 0x4322:
+ case 0x4328:
+ return 7000;
+ case 0x4325:
+ /* TODO: */
+ default:
+ return 15000;
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
@@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru
if (bus->bustype != SSB_BUSTYPE_PCI)
return;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
+ return;
+ }
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
@@ -236,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+ }
+
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
@@ -373,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
{
return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
}
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -2,7 +2,7 @@
* Sonics Silicon Backplane
* Broadcom ChipCommon Power Management Unit driver
*
- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2009, Michael Buesch <m@bues.ch>
* Copyright 2007, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
case 0x5354:
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
+ case 0x4322:
+ if (cc->pmu.rev == 2) {
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
+ }
+ break;
default:
ssb_printk(KERN_ERR PFX
"ERROR: PLL init unknown for device %04X\n",
@@ -411,12 +417,15 @@ static void ssb_pmu_resources_init(struc
u32 min_msk = 0, max_msk = 0;
unsigned int i;
const struct pmu_res_updown_tab_entry *updown_tab = NULL;
- unsigned int updown_tab_size;
+ unsigned int updown_tab_size = 0;
const struct pmu_res_depend_tab_entry *depend_tab = NULL;
- unsigned int depend_tab_size;
+ unsigned int depend_tab_size = 0;
switch (bus->chip_id) {
case 0x4312:
+ min_msk = 0xCBB;
+ break;
+ case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
@@ -495,9 +504,9 @@ static void ssb_pmu_resources_init(struc
chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
}
+/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
void ssb_pmu_init(struct ssb_chipcommon *cc)
{
- struct ssb_bus *bus = cc->dev->bus;
u32 pmucap;
if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
- if (cc->pmu.rev >= 1) {
- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
- ~SSB_CHIPCO_PMU_CTL_NOILPONW);
- } else {
- chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
- SSB_CHIPCO_PMU_CTL_NOILPONW);
- }
- }
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+ else
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+ SSB_CHIPCO_PMU_CTL_NOILPONW);
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -3,7 +3,7 @@
* Broadcom Gigabit Ethernet core driver
*
* Copyright 2008, Broadcom Corporation
- * Copyright 2008, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -12,6 +12,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <linux/slab.h>
/*
@@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
}
-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int reg, int size, u32 *val)
+static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
+ unsigned int devfn, int reg,
+ int size, u32 *val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
@@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
return PCIBIOS_SUCCESSFUL;
}
-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int reg, int size, u32 val)
+static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
+ unsigned int devfn, int reg,
+ int size, u32 val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
@@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str
return PCIBIOS_SUCCESSFUL;
}
-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
+static int __devinit ssb_gige_probe(struct ssb_device *sdev,
+ const struct ssb_device_id *id)
{
struct ssb_gige *dev;
u32 base, tmslow, tmshigh;
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -3,7 +3,7 @@
* Broadcom MIPS core driver
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
set_irq(dev, irq++);
}
break;
- /* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
case SSB_DEV_ETHERNET_GBIT:
@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
set_irq(dev, irq++);
break;
}
+ /* fallthrough */
+ case SSB_DEV_EXTIF:
+ set_irq(dev, 0);
+ break;
}
}
ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -3,7 +3,7 @@
* Broadcom PCI-core driver
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -15,6 +15,11 @@
#include "ssb_private.h"
+static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
+static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data);
static inline
u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
@@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore
.pci_ops = &ssb_pcicore_pciops,
.io_resource = &ssb_pcicore_io_resource,
.mem_resource = &ssb_pcicore_mem_resource,
- .mem_offset = 0x24000000,
};
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
- struct resource *res;
- int pos, size;
- u32 *base;
-
if (d->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
@@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
@@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
return ssb_mips_irq(extpci_core->dev) + 2;
}
-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
@@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
register_pci_controller(&ssb_pcicore_controller);
}
-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
{
struct ssb_bus *bus = pc->dev->bus;
u16 chipid_top;
@@ -432,25 +408,137 @@ static int pcicore_is_in_hostmode(struct
}
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
+{
+ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
+ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
+ tmp &= ~0xF000;
+ tmp |= (pc->dev->core_index << 12);
+ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
+ }
+}
+
+static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
+{
+ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
+{
+ const u8 serdes_pll_device = 0x1D;
+ const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+ ssb_pcicore_polarity_workaround(pc));
+ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+ if (tmp & 0x4000)
+ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
+{
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus = pdev->bus;
+ u32 tmp;
+
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_PREF;
+ tmp |= SSB_PCICORE_SBTOPCI_BURST;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+
+ if (pdev->id.revision < 5) {
+ tmp = ssb_read32(pdev, SSB_IMCFGLO);
+ tmp &= ~SSB_IMCFGLO_SERTO;
+ tmp |= 2;
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+ ssb_write32(pdev, SSB_IMCFGLO, tmp);
+ ssb_commit_settings(bus);
+ } else if (pdev->id.revision >= 11) {
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_MRM;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+ }
+}
+
+static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
+{
+ u32 tmp;
+ u8 rev = pc->dev->id.revision;
+
+ if (rev == 0 || rev == 1) {
+ /* TLP Workaround register. */
+ tmp = ssb_pcie_read(pc, 0x4);
+ tmp |= 0x8;
+ ssb_pcie_write(pc, 0x4, tmp);
+ }
+ if (rev == 1) {
+ /* DLLP Link Control register. */
+ tmp = ssb_pcie_read(pc, 0x100);
+ tmp |= 0x40;
+ ssb_pcie_write(pc, 0x100, tmp);
+ }
+
+ if (rev == 0) {
+ const u8 serdes_rx_device = 0x1F;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 2 /* Timer */, 0x8128);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 6 /* CDR */, 0x0100);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 7 /* CDR BW */, 0x1466);
+ } else if (rev == 3 || rev == 4 || rev == 5) {
+ /* TODO: DLLP Power Management Threshold */
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ } else if (rev == 7) {
+ /* TODO: No PLL down */
+ }
+
+ if (rev >= 6) {
+ /* Miscellaneous Configuration Fixup */
+ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
+ if (!(tmp & 0x8000))
+ pcicore_write16(pc, SSB_PCICORE_SPROM(5),
+ tmp | 0x8000);
+ }
+}
/**************************************************
* Generic and Clientmode operation code.
**************************************************/
-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
{
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus = pdev->bus;
+
+ if (bus->bustype == SSB_BUSTYPE_PCI)
+ ssb_pcicore_fix_sprom_core_index(pc);
+
/* Disable PCI interrupts. */
- ssb_write32(pc->dev, SSB_INTVEC, 0);
+ ssb_write32(pdev, SSB_INTVEC, 0);
+
+ /* Additional PCIe always once-executed workarounds */
+ if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
-void ssb_pcicore_init(struct ssb_pcicore *pc)
+void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
{
struct ssb_device *dev = pc->dev;
- struct ssb_bus *bus;
if (!dev)
return;
- bus = dev->bus;
if (!ssb_device_is_enabled(dev))
ssb_device_enable(dev, 0);
@@ -475,58 +563,104 @@ static void ssb_pcie_write(struct ssb_pc
pcicore_write32(pc, 0x134, data);
}
-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
- u8 address, u16 data)
+static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
{
const u16 mdio_control = 0x128;
const u16 mdio_data = 0x12C;
u32 v;
int i;
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (0x1F << 18);
+ v |= (phy << 4);
+ pcicore_write32(pc, mdio_data, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+}
+
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
+ u32 v;
+ int i;
+
v = 0x80; /* Enable Preamble Sequence */
v |= 0x2; /* MDIO Clock Divisor */
pcicore_write32(pc, mdio_control, v);
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
+
v = (1 << 30); /* Start of Transaction */
- v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 29); /* Read Transaction */
v |= (1 << 17); /* Turnaround */
- v |= (u32)device << 22;
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
v |= (u32)address << 18;
- v |= data;
pcicore_write32(pc, mdio_data, v);
/* Wait for the device to complete the transaction */
udelay(10);
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < max_retries; i++) {
v = pcicore_read32(pc, mdio_control);
- if (v & 0x100 /* Trans complete */)
+ if (v & 0x100 /* Trans complete */) {
+ udelay(10);
+ ret = pcicore_read32(pc, mdio_data);
break;
+ }
msleep(1);
}
pcicore_write32(pc, mdio_control, 0);
+ return ret;
}
-static void ssb_broadcast_value(struct ssb_device *dev,
- u32 address, u32 data)
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data)
{
- /* This is used for both, PCI and ChipCommon core, so be careful. */
- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
- struct ssb_device *dev;
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
- if (WARN_ON(!dev))
- return;
- /* This forces an update of the cached registers. */
- ssb_broadcast_value(dev, 0xFD8, 0);
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
}
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
@@ -551,13 +685,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
/* Enable interrupts for this device. */
- if (bus->host_pci &&
- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
u32 coremask;
/* Calculate the "coremask" for the device. */
coremask = (1 << dev->core_index);
+ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
if (err)
goto out;
@@ -579,48 +713,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
if (pc->setup_done)
goto out;
if (pdev->id.coreid == SSB_DEV_PCI) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_PREF;
- tmp |= SSB_PCICORE_SBTOPCI_BURST;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
-
- if (pdev->id.revision < 5) {
- tmp = ssb_read32(pdev, SSB_IMCFGLO);
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 2;
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
- ssb_write32(pdev, SSB_IMCFGLO, tmp);
- ssb_commit_settings(bus);
- } else if (pdev->id.revision >= 11) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_MRM;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
- }
+ ssb_pcicore_pci_setup_workarounds(pc);
} else {
WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
- //TODO: Better make defines for all these magic PCIE values.
- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
- /* TLP Workaround register. */
- tmp = ssb_pcie_read(pc, 0x4);
- tmp |= 0x8;
- ssb_pcie_write(pc, 0x4, tmp);
- }
- if (pdev->id.revision == 0) {
- const u8 serdes_rx_device = 0x1F;
-
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 2 /* Timer */, 0x8128);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 6 /* CDR */, 0x0100);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 7 /* CDR BW */, 0x1466);
- } else if (pdev->id.revision == 1) {
- /* DLLP Link Control register. */
- tmp = ssb_pcie_read(pc, 0x100);
- tmp |= 0x40;
- ssb_pcie_write(pc, 0x100, tmp);
- }
+ ssb_pcicore_pcie_setup_workarounds(pc);
}
pc->setup_done = 1;
out:
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -3,7 +3,7 @@
* Subsystem core
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -12,12 +12,14 @@
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -140,6 +142,19 @@ static void ssb_device_put(struct ssb_de
put_device(dev->dev);
}
+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+{
+ if (drv)
+ get_driver(&drv->drv);
+ return drv;
+}
+
+static inline void ssb_driver_put(struct ssb_driver *drv)
+{
+ if (drv)
+ put_driver(&drv->drv);
+}
+
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -210,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
EXPORT_SYMBOL(ssb_bus_suspend);
#ifdef CONFIG_SSB_SPROM
-int ssb_devices_freeze(struct ssb_bus *bus)
+/** ssb_devices_freeze - Freeze all devices on the bus.
+ *
+ * After freezing no device driver will be handling a device
+ * on this bus anymore. ssb_devices_thaw() must be called after
+ * a successful freeze to reactivate the devices.
+ *
+ * @bus: The bus.
+ * @ctx: Context structure. Pass this to ssb_devices_thaw().
+ */
+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
{
- struct ssb_device *dev;
- struct ssb_driver *drv;
- int err = 0;
- int i;
- pm_message_t state = PMSG_FREEZE;
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->bus = bus;
+ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
- /* First check that we are capable to freeze all devices. */
for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
- continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
+ sdev = ssb_device_get(&bus->devices[i]);
+
+ if (!sdev->dev || !sdev->dev->driver ||
+ !device_is_registered(sdev->dev)) {
+ ssb_device_put(sdev);
continue;
- if (!drv->suspend) {
- /* Nope, can't suspend this one. */
- return -EOPNOTSUPP;
}
- }
- /* Now suspend all devices */
- for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+ ssb_device_put(sdev);
continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
- continue;
- err = drv->suspend(dev, state);
- if (err) {
- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
- dev_name(dev->dev));
- goto err_unwind;
}
+ sdrv->remove(sdev);
+ ctx->device_frozen[i] = 1;
}
return 0;
-err_unwind:
- for (i--; i >= 0; i--) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
- continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
- continue;
- if (drv->resume)
- drv->resume(dev);
- }
- return err;
}
-int ssb_devices_thaw(struct ssb_bus *bus)
+/** ssb_devices_thaw - Unfreeze all devices on the bus.
+ *
+ * This will re-attach the device drivers and re-init the devices.
+ *
+ * @ctx: The context structure from ssb_devices_freeze()
+ */
+int ssb_devices_thaw(struct ssb_freeze_context *ctx)
{
- struct ssb_device *dev;
- struct ssb_driver *drv;
- int err;
- int i;
+ struct ssb_bus *bus = ctx->bus;
+ struct ssb_device *sdev;
+ struct ssb_driver *sdrv;
+ unsigned int i;
+ int err, result = 0;
for (i = 0; i < bus->nr_devices; i++) {
- dev = &(bus->devices[i]);
- if (!dev->dev ||
- !dev->dev->driver ||
- !device_is_registered(dev->dev))
+ if (!ctx->device_frozen[i])
continue;
- drv = drv_to_ssb_drv(dev->dev->driver);
- if (!drv)
+ sdev = &bus->devices[i];
+
+ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
continue;
- if (SSB_WARN_ON(!drv->resume))
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv || !sdrv->probe))
continue;
- err = drv->resume(dev);
+
+ err = sdrv->probe(sdev, &sdev->id);
if (err) {
ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
- dev_name(dev->dev));
+ dev_name(sdev->dev));
+ result = err;
}
+ ssb_driver_put(sdrv);
+ ssb_device_put(sdev);
}
- return 0;
+ return result;
}
#endif /* CONFIG_SSB_SPROM */
@@ -380,6 +386,35 @@ static int ssb_device_uevent(struct devi
ssb_dev->id.revision);
}
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n",
+ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+ __ATTR_RO(name),
+ __ATTR_RO(core_num),
+ __ATTR_RO(coreid),
+ __ATTR_RO(vendor),
+ __ATTR_RO(revision),
+ __ATTR_RO(irq),
+ __ATTR_NULL,
+};
+
static struct bus_type ssb_bustype = {
.name = "ssb",
.match = ssb_bus_match,
@@ -389,6 +424,7 @@ static struct bus_type ssb_bustype = {
.suspend = ssb_device_suspend,
.resume = ssb_device_resume,
.uevent = ssb_device_uevent,
+ .dev_attrs = ssb_device_attrs,
};
static void ssb_buses_lock(void)
@@ -481,6 +517,7 @@ static int ssb_devices_register(struct s
#ifdef CONFIG_SSB_PCIHOST
sdev->irq = bus->host_pci->irq;
dev->parent = &bus->host_pci->dev;
+ sdev->dma_dev = dev->parent;
#endif
break;
case SSB_BUSTYPE_PCMCIA:
@@ -490,13 +527,13 @@ static int ssb_devices_register(struct s
#endif
break;
case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
- sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
dev->parent = &bus->host_sdio->dev;
#endif
break;
case SSB_BUSTYPE_SSB:
dev->dma_mask = &dev->coherent_dma_mask;
+ sdev->dma_dev = dev;
break;
}
@@ -523,7 +560,7 @@ error:
}
/* Needs ssb_buses_lock() */
-static int ssb_attach_queued_buses(void)
+static int __devinit ssb_attach_queued_buses(void)
{
struct ssb_bus *bus, *n;
int err = 0;
@@ -734,9 +771,9 @@ out:
return err;
}
-static int ssb_bus_register(struct ssb_bus *bus,
- ssb_invariants_func_t get_invariants,
- unsigned long baseaddr)
+static int __devinit ssb_bus_register(struct ssb_bus *bus,
+ ssb_invariants_func_t get_invariants,
+ unsigned long baseaddr)
{
int err;
@@ -817,8 +854,8 @@ err_disable_xtal:
}
#ifdef CONFIG_SSB_PCIHOST
-int ssb_bus_pcibus_register(struct ssb_bus *bus,
- struct pci_dev *host_pci)
+int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
+ struct pci_dev *host_pci)
{
int err;
@@ -830,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b
if (!err) {
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
"PCI device %s\n", dev_name(&host_pci->dev));
+ } else {
+ ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+ " of SSB with error %d\n", err);
}
return err;
@@ -838,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
#endif /* CONFIG_SSB_PCIHOST */
#ifdef CONFIG_SSB_PCMCIAHOST
-int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
- struct pcmcia_device *pcmcia_dev,
- unsigned long baseaddr)
+int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr)
{
int err;
@@ -860,8 +900,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
- unsigned int quirks)
+int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
+ struct sdio_func *func,
+ unsigned int quirks)
{
int err;
@@ -881,9 +922,9 @@ int ssb_bus_sdiobus_register(struct ssb_
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
-int ssb_bus_ssbbus_register(struct ssb_bus *bus,
- unsigned long baseaddr,
- ssb_invariants_func_t get_invariants)
+int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
+ unsigned long baseaddr,
+ ssb_invariants_func_t get_invariants)
{
int err;
@@ -964,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
switch (plltype) {
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
if (m & SSB_CHIPCO_CLK_T6_MMASK)
- return SSB_CHIPCO_CLK_T6_M0;
- return SSB_CHIPCO_CLK_T6_M1;
+ return SSB_CHIPCO_CLK_T6_M1;
+ return SSB_CHIPCO_CLK_T6_M0;
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
@@ -1080,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str
{
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
- /* The REJECT bit changed position in TMSLOW between
- * Backplane revisions. */
+ /* The REJECT bit seems to be different for Backplane rev 2.3 */
switch (rev) {
case SSB_IDLOW_SSBREV_22:
- return SSB_TMSLOW_REJECT_22;
+ case SSB_IDLOW_SSBREV_24:
+ case SSB_IDLOW_SSBREV_26:
+ return SSB_TMSLOW_REJECT;
case SSB_IDLOW_SSBREV_23:
return SSB_TMSLOW_REJECT_23;
- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
- case SSB_IDLOW_SSBREV_25: /* same here */
- case SSB_IDLOW_SSBREV_26: /* same here */
+ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
- return SSB_TMSLOW_REJECT_23; /* this is a guess */
+ return SSB_TMSLOW_REJECT; /* this is a guess */
default:
printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
WARN_ON(1);
}
- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
int ssb_device_is_enabled(struct ssb_device *dev)
@@ -1155,10 +1195,10 @@ void ssb_device_enable(struct ssb_device
}
EXPORT_SYMBOL(ssb_device_enable);
-/* Wait for a bit in a register to get set or unset.
+/* Wait for bitmask in a register to get set or cleared.
* timeout is in units of ten-microseconds */
-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
- int timeout, int set)
+static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
+ int timeout, int set)
{
int i;
u32 val;
@@ -1166,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic
for (i = 0; i < timeout; i++) {
val = ssb_read32(dev, reg);
if (set) {
- if (val & bitmask)
+ if ((val & bitmask) == bitmask)
return 0;
} else {
if (!(val & bitmask))
@@ -1183,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
{
- u32 reject;
+ u32 reject, val;
if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
return;
reject = ssb_tmslow_reject_bitmask(dev);
- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
- ssb_write32(dev, SSB_TMSLOW,
- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
- reject | SSB_TMSLOW_RESET |
- core_specific_flags);
- ssb_flush_tmslow(dev);
+
+ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
+ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
+ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val |= SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
+ 0);
+ }
+
+ ssb_write32(dev, SSB_TMSLOW,
+ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+ reject | SSB_TMSLOW_RESET |
+ core_specific_flags);
+ ssb_flush_tmslow(dev);
+
+ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+ val = ssb_read32(dev, SSB_IMSTATE);
+ val &= ~SSB_IMSTATE_REJECT;
+ ssb_write32(dev, SSB_IMSTATE, val);
+ }
+ }
ssb_write32(dev, SSB_TMSLOW,
reject | SSB_TMSLOW_RESET |
@@ -1205,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic
}
EXPORT_SYMBOL(ssb_device_disable);
+/* Some chipsets need routing known for PCIe and 64-bit DMA */
+static bool ssb_dma_translation_special_bit(struct ssb_device *dev)
+{
+ u16 chip_id = dev->bus->chip_id;
+
+ if (dev->id.coreid == SSB_DEV_80211) {
+ return (chip_id == 0x4322 || chip_id == 43221 ||
+ chip_id == 43231 || chip_id == 43222);
+ }
+
+ return 0;
+}
+
u32 ssb_dma_translation(struct ssb_device *dev)
{
switch (dev->bus->bustype) {
case SSB_BUSTYPE_SSB:
return 0;
case SSB_BUSTYPE_PCI:
- return SSB_PCI_DMA;
+ if (dev->bus->host_pci->is_pcie &&
+ ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) {
+ return SSB_PCIE_DMA_H32;
+ } else {
+ if (ssb_dma_translation_special_bit(dev))
+ return SSB_PCIE_DMA_H32;
+ else
+ return SSB_PCI_DMA;
+ }
default:
__ssb_dma_not_implemented(dev);
}
@@ -1328,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
- struct ssb_chipcommon *cc;
int err;
enum ssb_clkmode mode;
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto error;
- cc = &bus->chipco;
- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
- ssb_chipco_set_clockmode(cc, mode);
#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 1;
#endif
+
+ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+ ssb_chipco_set_clockmode(&bus->chipco, mode);
+
return 0;
error:
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
@@ -1349,6 +1428,37 @@ error:
}
EXPORT_SYMBOL(ssb_bus_powerup);
+static void ssb_broadcast_value(struct ssb_device *dev,
+ u32 address, u32 data)
+{
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ /* This is used for both, PCI and ChipCommon core, so be careful. */
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
+
+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+ dev = bus->chipco.dev;
+#endif
+ if (WARN_ON(!dev))
+ return;
+ /* This forces an update of the cached registers. */
+ ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
u32 ssb_admatch_base(u32 adm)
{
u32 base = 0;
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -1,7 +1,7 @@
/*
* Sonics Silicon Backplane PCI-Hostbus related functions.
*
- * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2006 Michael Buesch <m@bues.ch>
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -17,6 +17,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -167,7 +168,7 @@ err_pci:
}
/* Get the word-offset for a SSB_SPROM_XXX define. */
-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16))
+#define SPOFF(offset) ((offset) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
@@ -405,6 +406,46 @@ static void sprom_extract_r123(struct ss
out->antenna_gain.ghz5.a3 = gain;
}
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
+ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
+ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
+ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
+ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
+ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
+ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
+
+ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
+ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
+ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
+ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
+ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
+ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
+ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
+ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
+
+ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
+ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
+ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
+ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
+ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
+ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
+ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
+ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
+
+ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
+ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
+ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
+ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
+ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
+ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
+}
+
static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
{
int i;
@@ -427,10 +468,14 @@ static void sprom_extract_r45(struct ssb
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
} else {
SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
@@ -470,13 +515,21 @@ static void sprom_extract_r45(struct ssb
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
+ sprom_extract_r458(out, in);
+
/* TODO - get remaining rev 4 stuff needed */
}
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
- u16 v;
+ u16 v, o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ };
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
for (i = 0; i < 3; i++) {
@@ -560,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
sizeof(out->antenna_gain.ghz5));
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_MAXP, 0);
+
+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
+
+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GH_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
+
+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
+
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+ sprom_extract_r458(out, in);
+
/* TODO - get remaining rev 8 stuff needed */
}
@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
+
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
+ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+ case 1:
+ case 2:
+ case 3:
sprom_extract_r123(out, in);
- } else if (bus->chip_id == 0x4321) {
- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
- out->revision = 4;
+ break;
+ case 4:
+ case 5:
sprom_extract_r45(out, in);
- } else {
- switch (out->revision) {
- case 1:
- case 2:
- case 3:
- sprom_extract_r123(out, in);
- break;
- case 4:
- case 5:
- sprom_extract_r45(out, in);
- break;
- case 8:
- sprom_extract_r8(out, in);
- break;
- default:
- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
- " revision %d detected. Will extract"
- " v1\n", out->revision);
- out->revision = 1;
- sprom_extract_r123(out, in);
- }
+ break;
+ case 8:
+ sprom_extract_r8(out, in);
+ break;
+ default:
+ ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+ " revision %d detected. Will extract"
+ " v1\n", out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
}
if (out->boardflags_lo == 0xFFFF)
@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
- const struct ssb_sprom *fallback;
- int err = -ENOMEM;
+ int err;
u16 *buf;
if (!ssb_is_sprom_available(bus)) {
ssb_printk(KERN_ERR PFX "No SPROM available!\n");
return -ENODEV;
}
- if (bus->chipco.dev) { /* can be unavailible! */
+ if (bus->chipco.dev) { /* can be unavailable! */
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
@@ -644,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
- goto out;
+ return -ENOMEM;
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
@@ -654,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
- goto out;
+ return -ENOMEM;
bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
- * If we have a fallback, use that. */
- fallback = ssb_get_fallback_sprom();
- if (fallback) {
- memcpy(sprom, fallback, sizeof(*sprom));
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
+ " fallback SPROM failed (err %d)\n",
+ err);
+ } else {
+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+ " revision %d provided by"
+ " platform.\n", sprom->revision);
err = 0;
goto out_free;
}
@@ -676,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
-out:
return err;
}
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
struct ssb_boardinfo *bi)
{
- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
- &bi->vendor);
- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
- &bi->type);
- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
- &bi->rev);
+ bi->vendor = bus->host_pci->subsystem_vendor;
+ bi->type = bus->host_pci->subsystem_device;
+ bi->rev = bus->host_pci->revision;
}
int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -6,12 +6,13 @@
* Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
* Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
- * Copyright (c) 2005-2007 Michael Buesch <mbuesch@freenet.de>
+ * Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/ssb/ssb.h>
@@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci
# define ssb_pcihost_resume NULL
#endif /* CONFIG_PM */
-static int ssb_pcihost_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct ssb_bus *ssb;
int err = -ENOMEM;
const char *name;
+ u32 val;
ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
if (!ssb)
@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
goto err_pci_disable;
pci_set_master(dev);
+ /* Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
err = ssb_bus_pcibus_register(ssb, dev);
if (err)
goto err_pci_release_regions;
@@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
pci_set_drvdata(dev, NULL);
}
-int ssb_pcihost_register(struct pci_driver *driver)
+int __devinit ssb_pcihost_register(struct pci_driver *driver)
{
driver->probe = ssb_pcihost_probe;
driver->remove = ssb_pcihost_remove;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -3,7 +3,7 @@
* PCMCIA-Hostbus related functions
*
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
} \
} while (0)
-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
- struct ssb_init_invariants *iv)
+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
+{
+ struct ssb_sprom *sprom = priv;
+
+ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+ return -EINVAL;
+ if (tuple->TupleDataLen != ETH_ALEN + 2)
+ return -EINVAL;
+ if (tuple->TupleData[1] != ETH_ALEN)
+ return -EINVAL;
+ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
+ return 0;
+};
+
+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
+ tuple_t *tuple,
+ void *priv)
{
- tuple_t tuple;
- int res;
- unsigned char buf[32];
+ struct ssb_init_invariants *iv = priv;
struct ssb_sprom *sprom = &iv->sprom;
struct ssb_boardinfo *bi = &iv->boardinfo;
const char *error_description;
+ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
+ switch (tuple->TupleData[0]) {
+ case SSB_PCMCIA_CIS_ID:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
+ (tuple->TupleDataLen != 7),
+ "id tpl size");
+ bi->vendor = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_BOARDREV:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "boardrev tpl size");
+ sprom->board_rev = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_PA:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
+ (tuple->TupleDataLen != 10),
+ "pa tpl size");
+ sprom->pa0b0 = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ sprom->pa0b1 = tuple->TupleData[3] |
+ ((u16)tuple->TupleData[4] << 8);
+ sprom->pa0b2 = tuple->TupleData[5] |
+ ((u16)tuple->TupleData[6] << 8);
+ sprom->itssi_a = tuple->TupleData[7];
+ sprom->itssi_bg = tuple->TupleData[7];
+ sprom->maxpwr_a = tuple->TupleData[8];
+ sprom->maxpwr_bg = tuple->TupleData[8];
+ break;
+ case SSB_PCMCIA_CIS_OEMNAME:
+ /* We ignore this. */
+ break;
+ case SSB_PCMCIA_CIS_CCODE:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "ccode tpl size");
+ sprom->country_code = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTENNA:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "ant tpl size");
+ sprom->ant_available_a = tuple->TupleData[1];
+ sprom->ant_available_bg = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "antg tpl size");
+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+ (tuple->TupleDataLen != 5),
+ "bfl tpl size");
+ sprom->boardflags_lo = tuple->TupleData[1] |
+ ((u16)tuple->TupleData[2] << 8);
+ break;
+ case SSB_PCMCIA_CIS_LEDS:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 5,
+ "leds tpl size");
+ sprom->gpio0 = tuple->TupleData[1];
+ sprom->gpio1 = tuple->TupleData[2];
+ sprom->gpio2 = tuple->TupleData[3];
+ sprom->gpio3 = tuple->TupleData[4];
+ break;
+ }
+ return -ENOSPC; /* continue with next entry */
+
+error:
+ ssb_printk(KERN_ERR PFX
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+}
+
+
+int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv)
+{
+ struct ssb_sprom *sprom = &iv->sprom;
+ int res;
+
memset(sprom, 0xFF, sizeof(*sprom));
sprom->revision = 1;
sprom->boardflags_lo = 0;
sprom->boardflags_hi = 0;
/* First fetch the MAC address. */
- memset(&tuple, 0, sizeof(tuple));
- tuple.DesiredTuple = CISTPL_FUNCE;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
- break;
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "MAC next tpl data");
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+ ssb_printk(KERN_ERR PFX
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
}
- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
/* Fetch the vendor specific tuples. */
- memset(&tuple, 0, sizeof(tuple));
- tuple.DesiredTuple = SSB_PCMCIA_CIS;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
- switch (tuple.TupleData[0]) {
- case SSB_PCMCIA_CIS_ID:
- GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
- (tuple.TupleDataLen != 7),
- "id tpl size");
- bi->vendor = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- break;
- case SSB_PCMCIA_CIS_BOARDREV:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "boardrev tpl size");
- sprom->board_rev = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_PA:
- GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
- (tuple.TupleDataLen != 10),
- "pa tpl size");
- sprom->pa0b0 = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- sprom->pa0b1 = tuple.TupleData[3] |
- ((u16)tuple.TupleData[4] << 8);
- sprom->pa0b2 = tuple.TupleData[5] |
- ((u16)tuple.TupleData[6] << 8);
- sprom->itssi_a = tuple.TupleData[7];
- sprom->itssi_bg = tuple.TupleData[7];
- sprom->maxpwr_a = tuple.TupleData[8];
- sprom->maxpwr_bg = tuple.TupleData[8];
- break;
- case SSB_PCMCIA_CIS_OEMNAME:
- /* We ignore this. */
- break;
- case SSB_PCMCIA_CIS_CCODE:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "ccode tpl size");
- sprom->country_code = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_ANTENNA:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "ant tpl size");
- sprom->ant_available_a = tuple.TupleData[1];
- sprom->ant_available_bg = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_ANTGAIN:
- GOTO_ERROR_ON(tuple.TupleDataLen != 2,
- "antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_BFLAGS:
- GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
- (tuple.TupleDataLen != 5),
- "bfl tpl size");
- sprom->boardflags_lo = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
- break;
- case SSB_PCMCIA_CIS_LEDS:
- GOTO_ERROR_ON(tuple.TupleDataLen != 5,
- "leds tpl size");
- sprom->gpio0 = tuple.TupleData[1];
- sprom->gpio1 = tuple.TupleData[2];
- sprom->gpio2 = tuple.TupleData[3];
- sprom->gpio3 = tuple.TupleData[4];
- break;
- }
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- if (res == -ENOSPC)
- break;
- GOTO_ERROR_ON(res != 0, "VEN next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != 0, "VEN next tpl data");
- }
+ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
+ ssb_pcmcia_do_get_invariants, iv);
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
- return 0;
-error:
ssb_printk(KERN_ERR PFX
- "PCMCIA: Failed to fetch device invariants: %s\n",
- error_description);
+ "PCMCIA: Failed to fetch device invariants\n");
return -ENODEV;
}
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -2,7 +2,7 @@
* Sonics Silicon Backplane
* Bus scanning
*
- * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2007 Michael Buesch <m@bues.ch>
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -260,7 +260,10 @@ static int we_support_multiple_80211_cor
#ifdef CONFIG_SSB_PCIHOST
if (bus->bustype == SSB_BUSTYPE_PCI) {
if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
- bus->host_pci->device == 0x4324)
+ ((bus->host_pci->device == 0x4313) ||
+ (bus->host_pci->device == 0x431A) ||
+ (bus->host_pci->device == 0x4321) ||
+ (bus->host_pci->device == 0x4324)))
return 1;
}
#endif /* CONFIG_SSB_PCIHOST */
@@ -309,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
} else {
if (bus->bustype == SSB_BUSTYPE_PCI) {
bus->chip_id = pcidev_to_chipid(bus->host_pci);
- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
- &bus->chip_rev);
+ bus->chip_rev = bus->host_pci->revision;
bus->chip_package = 0;
} else {
bus->chip_id = 0x4710;
@@ -354,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
dev->bus = bus;
dev->ops = bus->ops;
- ssb_dprintk(KERN_INFO PFX
+ printk(KERN_DEBUG PFX
"Core %d found: %s "
"(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
i, ssb_core_name(dev->id.coreid),
@@ -422,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->pcicore.dev = dev;
#endif /* CONFIG_SSB_DRIVER_PCICORE */
break;
+ case SSB_DEV_ETHERNET:
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+ (bus->host_pci->device & 0xFF00) == 0x4300) {
+ /* This is a dangling ethernet core on a
+ * wireless device. Ignore it. */
+ continue;
+ }
+ }
+ break;
default:
break;
}
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -2,7 +2,7 @@
* Sonics Silicon Backplane
* Common SPROM support routines
*
- * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright (C) 2005-2008 Michael Buesch <m@bues.ch>
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
@@ -14,9 +14,10 @@
#include "ssb_private.h"
#include <linux/ctype.h>
+#include <linux/slab.h>
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
u16 *sprom;
int res = 0, err = -ENOMEM;
size_t sprom_size_words = bus->sprom_size;
+ struct ssb_freeze_context freeze;
sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
if (!sprom)
@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
err = -ERESTARTSYS;
if (mutex_lock_interruptible(&bus->sprom_mutex))
goto out_kfree;
- err = ssb_devices_freeze(bus);
- if (err == -EOPNOTSUPP) {
- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
- "No suspend support. Is CONFIG_PM enabled?\n");
- goto out_unlock;
- }
+ err = ssb_devices_freeze(bus, &freeze);
if (err) {
ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
goto out_unlock;
}
res = sprom_write(bus, sprom);
- err = ssb_devices_thaw(bus);
+ err = ssb_devices_thaw(&freeze);
if (err)
ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
out_unlock:
@@ -148,36 +145,43 @@ out:
}
/**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
- *
- * @sprom: The SPROM data structure to register.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
*
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * @sprom_callback: The callback function.
*
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
+ *
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
+ *
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
*
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
- *
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
*/
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out))
{
- if (fallback_sprom)
+ if (get_fallback_sprom)
return -EEXIST;
- fallback_sprom = sprom;
+ get_fallback_sprom = sprom_callback;
return 0;
}
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
{
- return fallback_sprom;
+ if (!get_fallback_sprom)
+ return -ENOENT;
+
+ return get_fallback_sprom(bus, out);
}
/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
@@ -188,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_b
/* this routine differs from specs as we do not access SPROM directly
on PCMCIA */
if (bus->bustype == SSB_BUSTYPE_PCI &&
- bus->chipco.dev && /* can be unavailible! */
+ bus->chipco.dev && /* can be unavailable! */
bus->chipco.dev->id.revision >= 31)
return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_
const char *buf, size_t count,
int (*sprom_check_crc)(const u16 *sprom, size_t size),
int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+ struct ssb_sprom *out);
/* core.c */
extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
-extern int ssb_devices_freeze(struct ssb_bus *bus);
-extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data));
extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+struct ssb_freeze_context {
+ /* Pointer to the bus */
+ struct ssb_bus *bus;
+ /* Boolean list to indicate whether a device is frozen on this bus. */
+ bool device_frozen[SSB_MAX_NR_CORES];
+};
+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
extern int __init b43_pci_ssb_bridge_init(void);
extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
+#else /* CONFIG_SSB_B43_PCI_BRIDGE */
static inline int b43_pci_ssb_bridge_init(void)
{
return 0;
@@ -196,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
static inline void b43_pci_ssb_bridge_exit(void)
{
}
-#endif /* CONFIG_SSB_PCIHOST */
+#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -16,6 +16,12 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
+struct ssb_sprom_core_pwr_info {
+ u8 itssi_2g, itssi_5g;
+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
+};
+
struct ssb_sprom {
u8 revision;
u8 il0mac[6]; /* MAC address for 802.11b/g */
@@ -25,8 +31,10 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
- u8 board_rev; /* Board revision number from SPROM. */
+ u16 board_rev; /* Board revision number from SPROM. */
u8 country_code; /* Country Code */
+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
@@ -55,6 +63,10 @@ struct ssb_sprom {
u8 tri5gl; /* 5.2GHz TX isolation */
u8 tri5g; /* 5.3GHz TX isolation */
u8 tri5gh; /* 5.8GHz TX isolation */
+ u8 txpid2g[4]; /* 2GHz TX power index */
+ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
+ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
+ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
u8 rxpo2g; /* 2GHz RX power offset */
u8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
@@ -76,6 +88,8 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
+ struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
@@ -88,6 +102,15 @@ struct ssb_sprom {
} ghz5; /* 5GHz band */
} antenna_gain;
+ struct {
+ struct {
+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+ } ghz2;
+ struct {
+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+ } ghz5;
+ } fem;
+
/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
@@ -95,7 +118,7 @@ struct ssb_sprom {
struct ssb_boardinfo {
u16 vendor;
u16 type;
- u16 rev;
+ u8 rev;
};
@@ -167,7 +190,7 @@ struct ssb_device {
* is an optimization. */
const struct ssb_bus_ops *ops;
- struct device *dev;
+ struct device *dev, *dma_dev;
struct ssb_bus *bus;
struct ssb_device_id id;
@@ -225,10 +248,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-static inline int ssb_driver_register(struct ssb_driver *drv)
-{
- return __ssb_driver_register(drv, THIS_MODULE);
-}
+#define ssb_driver_register(drv) \
+ __ssb_driver_register(drv, THIS_MODULE)
+
extern void ssb_driver_unregister(struct ssb_driver *drv);
@@ -269,7 +291,8 @@ struct ssb_bus {
const struct ssb_bus_ops *ops;
- /* The core in the basic address register window. (PCI bus only) */
+ /* The core currently mapped into the MMIO window.
+ * Not valid on all host-buses. So don't use outside of SSB. */
struct ssb_device *mapped_device;
union {
/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
@@ -281,14 +304,17 @@ struct ssb_bus {
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
- /* The bus this backplane is running on. */
+ /* The host-bus this backplane is running on. */
enum ssb_bustype bustype;
- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
- struct pci_dev *host_pci;
- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
- struct pcmcia_device *host_pcmcia;
- /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
- struct sdio_func *host_sdio;
+ /* Pointers to the host-bus. Check bustype before using any of these pointers. */
+ union {
+ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+ struct pci_dev *host_pci;
+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+ struct pcmcia_device *host_pcmcia;
+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+ struct sdio_func *host_sdio;
+ };
/* See enum ssb_quirks */
unsigned int quirks;
@@ -300,7 +326,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
- u16 chip_rev;
+ u8 chip_rev;
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
@@ -396,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+ int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out));
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+extern void ssb_commit_settings(struct ssb_bus *bus);
/* Various helper functions */
extern u32 ssb_admatch_base(u32 adm);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -85,6 +85,8 @@
#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
#define SSB_IMSTATE_TO 0x00040000 /* Timeout */
+#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */
#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
@@ -95,7 +97,7 @@
#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
+#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
@@ -172,25 +174,25 @@
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
#define SSB_SPROM_BASE1 0x1000
#define SSB_SPROM_BASE31 0x0800
-#define SSB_SPROM_REVISION 0x107E
+#define SSB_SPROM_REVISION 0x007E
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
#define SSB_SPROM_REVISION_CRC_SHIFT 8
/* SPROM Revision 1 */
-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */
#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM1_BINF 0x105C /* Board info */
+#define SSB_SPROM1_BINF 0x005C /* Board info */
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
@@ -198,63 +200,63 @@
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
-#define SSB_SPROM1_PA0B0 0x105E
-#define SSB_SPROM1_PA0B1 0x1060
-#define SSB_SPROM1_PA0B2 0x1062
-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
+#define SSB_SPROM1_PA0B0 0x005E
+#define SSB_SPROM1_PA0B1 0x0060
+#define SSB_SPROM1_PA0B2 0x0062
+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */
#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */
#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
-#define SSB_SPROM1_PA1B0 0x106A
-#define SSB_SPROM1_PA1B1 0x106C
-#define SSB_SPROM1_PA1B2 0x106E
-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
+#define SSB_SPROM1_PA1B0 0x006A
+#define SSB_SPROM1_PA1B1 0x006C
+#define SSB_SPROM1_PA1B2 0x006E
+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_ITSSI_A_SHIFT 8
-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
/* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */
#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */
#define SSB_SPROM2_OPO_VALUE 0x00FF
#define SSB_SPROM2_OPO_UNUSED 0xFF00
-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */
/* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
@@ -265,100 +267,144 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */
+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM4_AGAIN1_SHIFT 8
-#define SSB_SPROM4_AGAIN23 0x1060
+#define SSB_SPROM4_AGAIN23 0x0060
#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM4_AGAIN2_SHIFT 0
#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM4_AGAIN3_SHIFT 8
-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
+#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */
+#define SSB_SPROM4_TXPID2G0 0x00FF
+#define SSB_SPROM4_TXPID2G0_SHIFT 0
+#define SSB_SPROM4_TXPID2G1 0xFF00
+#define SSB_SPROM4_TXPID2G1_SHIFT 8
+#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */
+#define SSB_SPROM4_TXPID2G2 0x00FF
+#define SSB_SPROM4_TXPID2G2_SHIFT 0
+#define SSB_SPROM4_TXPID2G3 0xFF00
+#define SSB_SPROM4_TXPID2G3_SHIFT 8
+#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */
+#define SSB_SPROM4_TXPID5G0 0x00FF
+#define SSB_SPROM4_TXPID5G0_SHIFT 0
+#define SSB_SPROM4_TXPID5G1 0xFF00
+#define SSB_SPROM4_TXPID5G1_SHIFT 8
+#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */
+#define SSB_SPROM4_TXPID5G2 0x00FF
+#define SSB_SPROM4_TXPID5G2_SHIFT 0
+#define SSB_SPROM4_TXPID5G3 0xFF00
+#define SSB_SPROM4_TXPID5G3_SHIFT 8
+#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */
+#define SSB_SPROM4_TXPID5GL0 0x00FF
+#define SSB_SPROM4_TXPID5GL0_SHIFT 0
+#define SSB_SPROM4_TXPID5GL1 0xFF00
+#define SSB_SPROM4_TXPID5GL1_SHIFT 8
+#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */
+#define SSB_SPROM4_TXPID5GL2 0x00FF
+#define SSB_SPROM4_TXPID5GL2_SHIFT 0
+#define SSB_SPROM4_TXPID5GL3 0xFF00
+#define SSB_SPROM4_TXPID5GL3_SHIFT 8
+#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */
+#define SSB_SPROM4_TXPID5GH0 0x00FF
+#define SSB_SPROM4_TXPID5GH0_SHIFT 0
+#define SSB_SPROM4_TXPID5GH1 0xFF00
+#define SSB_SPROM4_TXPID5GH1_SHIFT 8
+#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */
+#define SSB_SPROM4_TXPID5GH2 0x00FF
+#define SSB_SPROM4_TXPID5GH2_SHIFT 0
+#define SSB_SPROM4_TXPID5GH3 0xFF00
+#define SSB_SPROM4_TXPID5GH3_SHIFT 8
+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM4_ITSSI_BG_SHIFT 8
-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */
#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM4_ITSSI_A_SHIFT 8
-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM4_GPIOA_P1_SHIFT 8
-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM4_GPIOB_P3_SHIFT 8
-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
-#define SSB_SPROM4_PA0B2 0x1086
-#define SSB_SPROM4_PA1B0 0x108E
-#define SSB_SPROM4_PA1B1 0x1090
-#define SSB_SPROM4_PA1B2 0x1092
+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */
+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */
+#define SSB_SPROM4_PA0B2 0x0086
+#define SSB_SPROM4_PA1B0 0x008E
+#define SSB_SPROM4_PA1B1 0x0090
+#define SSB_SPROM4_PA1B2 0x0092
/* SPROM Revision 5 (inherits most data from rev 4) */
-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */
+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */
#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
#define SSB_SPROM5_GPIOA_P1_SHIFT 8
-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */
#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
-#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
-#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
-#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
-#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
-#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */
+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */
+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */
+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM8_GPIOA_P1_SHIFT 8
+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM8_GPIOB_P3_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM8_AGAIN0_SHIFT 0
#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
#define SSB_SPROM8_AGAIN1_SHIFT 8
-#define SSB_SPROM8_AGAIN23 0x10A0
+#define SSB_SPROM8_AGAIN23 0x00A0
#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
-#define SSB_SPROM8_GPIOA_P1_SHIFT 8
-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
-#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
#define SSB_SPROM8_RSSISMC2G_SHIFT 4
@@ -366,7 +412,7 @@
#define SSB_SPROM8_RSSISAV2G_SHIFT 8
#define SSB_SPROM8_BXA2G 0x1800
#define SSB_SPROM8_BXA2G_SHIFT 11
-#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */
#define SSB_SPROM8_RSSISMF5G 0x000F
#define SSB_SPROM8_RSSISMC5G 0x00F0
#define SSB_SPROM8_RSSISMC5G_SHIFT 4
@@ -374,47 +420,138 @@
#define SSB_SPROM8_RSSISAV5G_SHIFT 8
#define SSB_SPROM8_BXA5G 0x1800
#define SSB_SPROM8_BXA5G_SHIFT 11
-#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */
#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
#define SSB_SPROM8_TRI5G_SHIFT 8
-#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */
#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
#define SSB_SPROM8_TRI5GH_SHIFT 8
-#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_FEM2G 0x00AE
+#define SSB_SPROM8_FEM5G 0x00B0
+#define SSB_SROM8_FEM_TSSIPOS 0x0001
+#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
+#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
+#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
+#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
+#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
+#define SSB_SROM8_FEM_TR_ISO 0x0700
+#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
+#define SSB_SROM8_FEM_ANTSWLUT 0xF800
+#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
+#define SSB_SPROM8_THERMAL 0x00B2
+#define SSB_SPROM8_MPWR_RAWTS 0x00B4
+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
+#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
+#define SSB_SROM8_PWR_INFO_CORE2 0x0100
+#define SSB_SROM8_PWR_INFO_CORE3 0x0120
+
+#define SSB_SROM8_2G_MAXP_ITSSI 0x00
+#define SSB_SPROM8_2G_MAXP 0x00FF
+#define SSB_SPROM8_2G_ITSSI 0xFF00
+#define SSB_SPROM8_2G_ITSSI_SHIFT 8
+#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
+#define SSB_SROM8_2G_PA_1 0x04
+#define SSB_SROM8_2G_PA_2 0x06
+#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
+#define SSB_SPROM8_5G_MAXP 0x00FF
+#define SSB_SPROM8_5G_ITSSI 0xFF00
+#define SSB_SPROM8_5G_ITSSI_SHIFT 8
+#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
+#define SSB_SPROM8_5GH_MAXP 0x00FF
+#define SSB_SPROM8_5GL_MAXP 0xFF00
+#define SSB_SPROM8_5GL_MAXP_SHIFT 8
+#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
+#define SSB_SROM8_5G_PA_1 0x0E
+#define SSB_SROM8_5G_PA_2 0x10
+#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
+#define SSB_SROM8_5GL_PA_1 0x14
+#define SSB_SROM8_5GL_PA_2 0x16
+#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
+#define SSB_SROM8_5GH_PA_1 0x1A
+#define SSB_SROM8_5GH_PA_2 0x1C
+
+/* TODO: Make it deprecated */
+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
-#define SSB_SPROM8_PA0B1 0x10C4
-#define SSB_SPROM8_PA0B2 0x10C6
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1 0x00C4
+#define SSB_SPROM8_PA0B2 0x00C6
+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */
#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
-#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */
#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
#define SSB_SPROM8_MAXP_AL_SHIFT 8
-#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
-#define SSB_SPROM8_PA1B1 0x10CE
-#define SSB_SPROM8_PA1B2 0x10D0
-#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
-#define SSB_SPROM8_PA1LOB1 0x10D4
-#define SSB_SPROM8_PA1LOB2 0x10D6
-#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
-#define SSB_SPROM8_PA1HIB1 0x10DA
-#define SSB_SPROM8_PA1HIB2 0x10DC
-#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
-#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1 0x00CE
+#define SSB_SPROM8_PA1B2 0x00D0
+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1 0x00D4
+#define SSB_SPROM8_PA1LOB2 0x00D6
+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x00DA
+#define SSB_SPROM8_PA1HIB2 0x00DC
+
+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
+#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
+#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
+#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
+#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */
+#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */
+#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
+#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */
+#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */
+#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */
+#define SSB_BFL_HGPA 0x2000 /* had high gain PA */
+#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
+#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
+
+/* Values for boardflags_hi read from SPROM */
+#define SSB_BFH_NOPA 0x0001 /* has no PA */
+#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
+#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */
+#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */
+#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
+#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */
+#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */
+
+/* Values for boardflags2_lo read from SPROM */
+#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */
+#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */
+#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */
+#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */
+#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */
+#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */
+#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */
+#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */
+#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */
+#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -8,7 +8,7 @@
* gpio interface, extbus, and support for serial and parallel flashes.
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, Michael Buesch <m@bues.ch>
*
* Licensed under the GPL version 2. See COPYING for details.
*/
@@ -123,6 +123,8 @@
#define SSB_CHIPCO_FLASHDATA 0x0048
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
+#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
#define SSB_CHIPCO_GPIOIN 0x0060
#define SSB_CHIPCO_GPIOOUT 0x0064
#define SSB_CHIPCO_GPIOOUTEN 0x0068
@@ -131,6 +133,9 @@
#define SSB_CHIPCO_GPIOIRQ 0x0074
#define SSB_CHIPCO_WATCHDOG 0x0080
#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
+#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
#define SSB_CHIPCO_CLOCK_N 0x0090
@@ -189,8 +194,10 @@
#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -5,12 +5,13 @@
* because of its small size we include it in the SSB core
* instead of creating a standalone module.
*
- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007 Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/pci.h>
+#include <linux/module.h>
#include <linux/ssb/ssb.h>
#include "ssb_private.h"
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -3,7 +3,7 @@
* Broadcom EXTIF core driver
*
* Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
* Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
* Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
*
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -3,7 +3,7 @@
* Embedded systems support code
*
* Copyright 2005-2008, Broadcom Corporation
- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -6,7 +6,7 @@
*
* Based on drivers/ssb/pcmcia.c
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*