hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-etherne...

6108 lines
214 KiB
Diff
Raw Blame History

From 810c2afe0c7e1be9352ad512b337110b100bfe3a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 08:51:14 +0000
Subject: [PATCH 36/57] NET: add mt7621 ethernet driver
---
arch/mips/include/asm/rt2880/board-custom.h | 153 +++
arch/mips/include/asm/rt2880/eureka_ep430.h | 204 ++++
arch/mips/include/asm/rt2880/generic.h | 42 +
arch/mips/include/asm/rt2880/lm.h | 32 +
arch/mips/include/asm/rt2880/prom.h | 50 +
arch/mips/include/asm/rt2880/rt_mmap.h | 796 ++++++++++++++++
arch/mips/include/asm/rt2880/serial_rt2880.h | 443 +++++++++
arch/mips/include/asm/rt2880/sizes.h | 52 +
arch/mips/include/asm/rt2880/surfboard.h | 70 ++
arch/mips/include/asm/rt2880/surfboardint.h | 190 ++++
arch/mips/include/asm/rt2880/war.h | 25 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/raeth/Kconfig | 344 +++++++
drivers/net/ethernet/raeth/Makefile | 7 +
drivers/net/ethernet/raeth/ethtool_readme.txt | 44 +
drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++
drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++
drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++
drivers/net/ethernet/raeth/ra_mac.c | 98 ++
drivers/net/ethernet/raeth/ra_mac.h | 35 +
drivers/net/ethernet/raeth/raether.c | 693 ++++++++++++++
drivers/net/ethernet/raeth/raether.h | 92 ++
drivers/net/ethernet/raeth/raether_pdma.c | 212 +++++
drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++
25 files changed, 5915 insertions(+)
create mode 100644 arch/mips/include/asm/rt2880/board-custom.h
create mode 100644 arch/mips/include/asm/rt2880/eureka_ep430.h
create mode 100644 arch/mips/include/asm/rt2880/generic.h
create mode 100644 arch/mips/include/asm/rt2880/lm.h
create mode 100644 arch/mips/include/asm/rt2880/prom.h
create mode 100644 arch/mips/include/asm/rt2880/rt_mmap.h
create mode 100644 arch/mips/include/asm/rt2880/serial_rt2880.h
create mode 100644 arch/mips/include/asm/rt2880/sizes.h
create mode 100644 arch/mips/include/asm/rt2880/surfboard.h
create mode 100644 arch/mips/include/asm/rt2880/surfboardint.h
create mode 100644 arch/mips/include/asm/rt2880/war.h
create mode 100644 drivers/net/ethernet/raeth/Kconfig
create mode 100644 drivers/net/ethernet/raeth/Makefile
create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt
create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c
create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h
create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h
create mode 100644 drivers/net/ethernet/raeth/ra_mac.c
create mode 100644 drivers/net/ethernet/raeth/ra_mac.h
create mode 100644 drivers/net/ethernet/raeth/raether.c
create mode 100644 drivers/net/ethernet/raeth/raether.h
create mode 100644 drivers/net/ethernet/raeth/raether_pdma.c
create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c
Index: linux-3.14.16/arch/mips/include/asm/rt2880/board-custom.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/board-custom.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,153 @@
+/* Copyright Statement:
+ *
+ * This software/firmware and related documentation ("MediaTek Software") are
+ * protected under relevant copyright laws. The information contained herein
+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
+ * Without the prior written permission of MediaTek inc. and/or its licensors,
+ * any reproduction, modification, use or disclosure of MediaTek Software,
+ * and information contained herein, in whole or in part, shall be strictly prohibited.
+ */
+/* MediaTek Inc. (C) 2010. All rights reserved.
+ *
+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
+ *
+ * The following software/firmware and/or related documentation ("MediaTek Software")
+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
+ * applicable license agreements with MediaTek Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
+#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
+
+#include <linux/autoconf.h>
+
+/*=======================================================================*/
+/* MT6575 SD */
+/*=======================================================================*/
+#ifdef MTK_EMMC_SUPPORT
+#define CFG_DEV_MSDC0
+#endif
+#define CFG_DEV_MSDC1
+#define CFG_DEV_MSDC2
+#define CFG_DEV_MSDC3
+#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE)
+/*
+SDIO slot index number used by connectivity combo chip:
+0: invalid (used by memory card)
+1: MSDC1
+2: MSDC2
+*/
+#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */
+#else
+#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT
+#endif
+
+#if 0 /* FIXME. */
+/*=======================================================================*/
+/* MT6575 UART */
+/*=======================================================================*/
+#define CFG_DEV_UART1
+#define CFG_DEV_UART2
+#define CFG_DEV_UART3
+#define CFG_DEV_UART4
+
+#define CFG_UART_PORTS (4)
+
+/*=======================================================================*/
+/* MT6575 I2C */
+/*=======================================================================*/
+#define CFG_DEV_I2C
+//#define CFG_I2C_HIGH_SPEED_MODE
+//#define CFG_I2C_DMA_MODE
+
+/*=======================================================================*/
+/* MT6575 ADB */
+/*=======================================================================*/
+#define ADB_SERIAL "E1K"
+
+#endif
+
+/*=======================================================================*/
+/* MT6575 NAND FLASH */
+/*=======================================================================*/
+#if 0
+#define RAMDOM_READ 1<<0
+#define CACHE_READ 1<<1
+/*******************************************************************************
+ * NFI & ECC Configuration
+ *******************************************************************************/
+typedef struct
+{
+ u16 id; //deviceid+menuid
+ u8 addr_cycle;
+ u8 iowidth;
+ u16 totalsize;
+ u16 blocksize;
+ u16 pagesize;
+ u32 timmingsetting;
+ char devciename[14];
+ u32 advancedmode; //
+}flashdev_info,*pflashdev_info;
+
+static const flashdev_info g_FlashTable[]={
+ //micro
+ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0},
+ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0},
+ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0},
+ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0},
+ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0},
+ //samsung
+ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0},
+ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0},
+ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ},
+ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ},
+ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0},
+ //hynix
+ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0},
+ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0},
+ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0},
+ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0},
+ //toshiba
+ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0},
+ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0},
+ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0},
+ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0},
+ //st-micro
+ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0},
+
+ // elpida
+ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0},
+ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0}
+};
+#endif
+
+
+#define NFI_DEFAULT_ACCESS_TIMING (0x44333)
+
+//uboot only support 1 cs
+#define NFI_CS_NUM (2)
+#define NFI_DEFAULT_CS (0)
+
+#define USE_AHB_MODE (1)
+
+#define PLATFORM_EVB (1)
+
+#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */
+
Index: linux-3.14.16/arch/mips/include/asm/rt2880/eureka_ep430.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/eureka_ep430.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,204 @@
+/**************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ */
+
+#ifndef _EUREKA_EP430_H
+#define _EUREKA_EP430_H
+
+
+#include <asm/addrspace.h> /* for KSEG1ADDR() */
+#include <asm/byteorder.h> /* for cpu_to_le32() */
+#include <asm/mach-ralink/rt_mmap.h>
+
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian.
+ */
+
+#define MV_WRITE(ofs, data) \
+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
+#define MV_READ(ofs, data) \
+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+#define MV_READ_DATA(ofs) \
+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_16(ofs, data) \
+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
+#define MV_READ_16(ofs, data) \
+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_8(ofs, data) \
+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
+#define MV_READ_8(ofs, data) \
+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
+
+#define MV_SET_REG_BITS(ofs,bits) \
+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits))
+#define MV_RESET_REG_BITS(ofs,bits) \
+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits))
+
+#define RALINK_PCI_CONFIG_ADDR 0x20
+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
+
+#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883)
+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010)
+#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018)
+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030)
+#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034)
+#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038)
+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
+#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050)
+
+#elif defined(CONFIG_RALINK_RT3883)
+
+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
+
+/*
+PCI0 --> PCI
+PCI1 --> PCIe
+*/
+#define RT3883_PCI_OFFSET 0x1000
+#define RT3883_PCIE_OFFSET 0x2000
+
+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010)
+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018)
+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030)
+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034)
+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038)
+
+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010)
+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018)
+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030)
+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034)
+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038)
+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050)
+
+#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628)
+
+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
+
+/*
+PCI0 --> PCIe 0
+PCI1 --> PCIe 1
+*/
+#define RT6855_PCIE0_OFFSET 0x2000
+#define RT6855_PCIE1_OFFSET 0x3000
+
+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
+
+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
+
+#elif defined (CONFIG_RALINK_MT7621)
+
+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
+
+/*
+PCI0 --> PCIe 0
+PCI1 --> PCIe 1
+PCI2 --> PCIe 2
+*/
+#define RT6855_PCIE0_OFFSET 0x2000
+#define RT6855_PCIE1_OFFSET 0x3000
+#define RT6855_PCIE2_OFFSET 0x4000
+
+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
+
+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
+
+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
+
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
+
+#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350)
+#else
+#error "undefined in PCI"
+#endif
+
+#endif
Index: linux-3.14.16/arch/mips/include/asm/rt2880/generic.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/generic.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the Palmchip boards specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_SURFBOARD_GENERIC_H
+#define __ASM_SURFBOARD_GENERIC_H
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/mach-ralink/rt_mmap.h>
+
+/*
+ * Reset register.
+ */
+#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34))
+#define GORESET (0x1)
+
+/*
+ * Power-off register
+ */
+#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24))
+#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */
+#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28))
+#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20))
+#define POWEROFF (0x0) /* drive low */
+
+
+#endif /* __ASM_SURFBOARD_GENERIC_H */
Index: linux-3.14.16/arch/mips/include/asm/rt2880/lm.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/lm.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,32 @@
+#include <linux/version.h>
+
+struct lm_device {
+ struct device dev;
+ struct resource resource;
+ unsigned int irq;
+ unsigned int id;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+ void *lm_drvdata;
+#endif
+};
+
+struct lm_driver {
+ struct device_driver drv;
+ int (*probe)(struct lm_device *);
+ void (*remove)(struct lm_device *);
+ int (*suspend)(struct lm_device *, u32);
+ int (*resume)(struct lm_device *);
+};
+
+int lm_driver_register(struct lm_driver *drv);
+void lm_driver_unregister(struct lm_driver *drv);
+
+int lm_device_register(struct lm_device *dev);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+# define lm_get_drvdata(lm) ((lm)->lm_drvdata)
+# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0)
+#else
+# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
+# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
+#endif
Index: linux-3.14.16/arch/mips/include/asm/rt2880/prom.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/prom.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,50 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void setup_prom_printf(int tty_no);
+extern void prom_setup_printf(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern void prom_free_prom_memory (void);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS 32
+struct prom_pmemblock {
+ unsigned long base; /* Within KSEG0. */
+ unsigned int size; /* In bytes. */
+ unsigned int type; /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
Index: linux-3.14.16/arch/mips/include/asm/rt2880/rt_mmap.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/rt_mmap.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,796 @@
+/**************************************************************************
+ *
+ * BRIEF MODULE DESCRIPTION
+ * register definition for Ralink RT-series SoC
+ *
+ * Copyright 2007 Ralink Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ */
+
+#ifndef __RALINK_MMAP__
+#define __RALINK_MMAP__
+
+#if defined (CONFIG_RALINK_RT2880_SHUTTLE)
+
+#define RALINK_SYSCTL_BASE 0xA0300000
+#define RALINK_TIMER_BASE 0xA0300100
+#define RALINK_INTCL_BASE 0xA0300200
+#define RALINK_MEMCTRL_BASE 0xA0300300
+#define RALINK_UART_BASE 0xA0300500
+#define RALINK_PIO_BASE 0xA0300600
+#define RALINK_I2C_BASE 0xA0300900
+#define RALINK_SPI_BASE 0xA0300B00
+#define RALINK_UART_LITE_BASE 0xA0300C00
+#define RALINK_FRAME_ENGINE_BASE 0xA0310000
+#define RALINK_EMBEDD_ROM_BASE 0xA0400000
+#define RALINK_PCI_BASE 0xA0500000
+#define RALINK_11N_MAC_BASE 0xA0600000
+
+//Interrupt Controller
+#define RALINK_INTCTL_TIMER0 (1<<0)
+#define RALINK_INTCTL_WDTIMER (1<<1)
+#define RALINK_INTCTL_UART (1<<2)
+#define RALINK_INTCTL_PIO (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UARTLITE (1<<8)
+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
+
+//Reset Control Register
+#define RALINK_TIMER_RST (1<<1)
+#define RALINK_INTC_RST (1<<2)
+#define RALINK_MC_RST (1<<3)
+#define RALINK_CPU_RST (1<<4)
+#define RALINK_UART_RST (1<<5)
+#define RALINK_PIO_RST (1<<6)
+#define RALINK_I2C_RST (1<<9)
+#define RALINK_SPI_RST (1<<11)
+#define RALINK_UART2_RST (1<<12)
+#define RALINK_PCI_RST (1<<16)
+#define RALINK_2860_RST (1<<17)
+#define RALINK_FE_RST (1<<18)
+#define RALINK_PCM_RST (1<<19)
+
+
+#elif defined (CONFIG_RALINK_RT2880_MP)
+
+#define RALINK_SYSCTL_BASE 0xA0300000
+#define RALINK_TIMER_BASE 0xA0300100
+#define RALINK_INTCL_BASE 0xA0300200
+#define RALINK_MEMCTRL_BASE 0xA0300300
+#define RALINK_UART_BASE 0xA0300500
+#define RALINK_PIO_BASE 0xA0300600
+#define RALINK_I2C_BASE 0xA0300900
+#define RALINK_SPI_BASE 0xA0300B00
+#define RALINK_UART_LITE_BASE 0x00300C00
+#define RALINK_FRAME_ENGINE_BASE 0xA0400000
+#define RALINK_EMBEDD_ROM_BASE 0xA0410000
+#define RALINK_PCI_BASE 0xA0440000
+#define RALINK_11N_MAC_BASE 0xA0480000
+
+//Interrupt Controller
+#define RALINK_INTCTL_TIMER0 (1<<0)
+#define RALINK_INTCTL_WDTIMER (1<<1)
+#define RALINK_INTCTL_UART (1<<2)
+#define RALINK_INTCTL_PIO (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UARTLITE (1<<8)
+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
+
+//Reset Control Register
+#define RALINK_TIMER_RST (1<<1)
+#define RALINK_INTC_RST (1<<2)
+#define RALINK_MC_RST (1<<3)
+#define RALINK_CPU_RST (1<<4)
+#define RALINK_UART_RST (1<<5)
+#define RALINK_PIO_RST (1<<6)
+#define RALINK_I2C_RST (1<<9)
+#define RALINK_SPI_RST (1<<11)
+#define RALINK_UART2_RST (1<<12)
+#define RALINK_PCI_RST (1<<16)
+#define RALINK_2860_RST (1<<17)
+#define RALINK_FE_RST (1<<18)
+#define RALINK_PCM_RST (1<<19)
+
+#elif defined (CONFIG_RALINK_RT3052)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_PCM_BASE 0xB0000400
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_GDMA_BASE 0xB0000700
+#define RALINK_NAND_CTRL_BASE 0xB0000800
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_OTG_BASE 0x101C0000
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_NAND (1<<8)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_OTG (1<<18)
+#define RALINK_INTCTL_OTG_IRQN 18
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_CPU_RST (1<<1)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_RT2872_RST (1<<20)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_OTG_RST (1<<22)
+#define RALINK_SW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+
+#elif defined (CONFIG_RALINK_RT3352)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_NAND_CTRL_BASE 0xB0000800
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_USB_DEV_BASE 0x10120000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+
+#define RALINK_MCNT_CFG 0xB0000D00
+#define RALINK_COMPARE 0xB0000D04
+#define RALINK_COUNT 0xB0000D08
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_OTG (1<<18)
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_WLAN_RST (1<<20)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_ESW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+
+
+//Clock Conf Register
+#define RALINK_UPHY1_CLK_EN (1<<20)
+#define RALINK_UPHY0_CLK_EN (1<<18)
+#define RALINK_GE1_CLK_EN (1<<16)
+
+
+#elif defined (CONFIG_RALINK_RT5350)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_USB_DEV_BASE 0x10120000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+
+#define RALINK_MCNT_CFG 0xB0000D00
+#define RALINK_COMPARE 0xB0000D04
+#define RALINK_COUNT 0xB0000D08
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_USB_HOST (1<<18)
+#define RALINK_INTCTL_USB_DEV (1<<19)
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_WLAN_RST (1<<20)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_ESW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+#define RALINK_MIPSC_RST (1<<28)
+
+//Clock Conf Register
+#define RALINK_UPHY0_CLK_EN (1<<18)
+#define RALINK_GE1_CLK_EN (1<<16)
+
+#elif defined (CONFIG_RALINK_RT2883)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_PCM_BASE 0xB0000400
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_GDMA_BASE 0xB0000700
+#define RALINK_NAND_CTRL_BASE 0xB0000800
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_OTG_BASE 0x101C0000
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_NAND (1<<8)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_OTG (1<<18)
+#define RALINK_INTCTL_OTG_IRQN 18
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_CPU_RST (1<<1)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_WLAN_RST (1<<20)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_OTG_RST (1<<22)
+#define RALINK_PCIE_RST (1<<23)
+
+#elif defined (CONFIG_RALINK_RT3883)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_NOR_CTRL_BASE 0xB0000700
+#define RALINK_NAND_CTRL_BASE 0xB0000810
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_CODEC1_BASE 0xB0003000
+#define RALINK_CODEC2_BASE 0xB0003800
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_USB_DEV_BASE 0x10120000
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+#define RALINK_PCIE_BASE 0xB0200000
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_NAND (1<<8)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_UHST (1<<18)
+#define RALINK_INTCTL_UDEV (1<<19)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_NAND_RST (1<<15)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_WLAN_RST (1<<20)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_PCIE_RST (1<<23)
+#define RALINK_PCI_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+#define RALINK_FLASH_RST (1<<26)
+
+//Clock Conf Register
+#define RALINK_UPHY1_CLK_EN (1<<20)
+#define RALINK_UPHY0_CLK_EN (1<<18)
+#define RALINK_GE1_CLK_EN (1<<16)
+
+#elif defined (CONFIG_RALINK_RT6855)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_NAND_CTRL_BASE 0xB0000800
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_USB_DEV_BASE 0x10120000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+
+#define RALINK_MCNT_CFG 0xB0000D00
+#define RALINK_COMPARE 0xB0000D04
+#define RALINK_COUNT 0xB0000D08
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_OTG (1<<18)
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_ESW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+#define RALINK_PCIE0_RST (1<<26)
+#define RALINK_PCIE1_RST (1<<27)
+
+//Clock Conf Register
+#define RALINK_UPHY0_CLK_EN (1<<25)
+#define RALINK_PCIE0_CLK_EN (1<<26)
+#define RALINK_PCIE1_CLK_EN (1<<27)
+
+
+#elif defined (CONFIG_RALINK_MT7620)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
+#define RALINK_UART_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_NAND_CTRL_BASE 0xB0000810
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE_BASE 0x10000C00
+#define RALINK_MIPS_CNT_BASE 0x10000D00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_PPE_BASE 0xB0100C00
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_USB_DEV_BASE 0x10120000
+#define RALINK_MSDC_BASE 0xB0130000
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+
+#define RALINK_MCNT_CFG 0xB0000D00
+#define RALINK_COMPARE 0xB0000D04
+#define RALINK_COUNT 0xB0000D08
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_SPI (1<<11)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_CRYPTO (1<<13)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_UHST (1<<18)
+#define RALINK_INTCTL_UDEV (1<<19)
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_ESW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+#define RALINK_PCIE0_RST (1<<26)
+#define RALINK_PCIE1_RST (1<<27)
+#define RALINK_MIPS_CNT_RST (1<<28)
+#define RALINK_CRYPTO_RST (1<<29)
+
+//Clock Conf Register
+#define RALINK_UPHY0_CLK_EN (1<<25)
+#define RALINK_UPHY1_CLK_EN (1<<22)
+#define RALINK_PCIE0_CLK_EN (1<<26)
+#define RALINK_PCIE1_CLK_EN (1<<27)
+
+//CPU PLL CFG Register
+#define CPLL_SW_CONFIG (0x1UL << 31)
+#define CPLL_MULT_RATIO_SHIFT 16
+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
+#define CPLL_DIV_RATIO_SHIFT 10
+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
+#define BASE_CLOCK 40 /* Mhz */
+
+#elif defined (CONFIG_RALINK_MT7621)
+
+#define RALINK_SYSCTL_BASE 0xBE000000
+#define RALINK_TIMER_BASE 0xBE000100
+#define RALINK_INTCL_BASE 0xBE000200
+#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400
+#define RALINK_MIPS_CNT_BASE 0x1E000500
+#define RALINK_PIO_BASE 0xBE000600
+#define RALINK_SPDIF_BASE 0xBE000700
+#define RALINK_I2C_BASE 0xBE000900
+#define RALINK_I2S_BASE 0xBE000A00
+#define RALINK_SPI_BASE 0xBE000B00
+#define RALINK_UART_LITE1_BASE 0x1E000C00
+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
+#define RALINK_UART_LITE2_BASE 0x1E000D00
+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
+#define RALINK_UART_LITE3_BASE 0x1E000E00
+#define RALINK_ANA_CTRL_BASE 0xBE000F00
+#define RALINK_PCM_BASE 0xBE002000
+#define RALINK_GDMA_BASE 0xBE002800
+#define RALINK_NAND_CTRL_BASE 0xBE003000
+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
+#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000
+#define RALINK_MEMCTRL_BASE 0xBE005000
+#define RALINK_EXT_MC_ARB_BASE 0xBE006000
+#define RALINK_HS_DMA_BASE 0xBE007000
+#define RALINK_FRAME_ENGINE_BASE 0xBE100000
+#define RALINK_PPE_BASE 0xBE100C00
+#define RALINK_ETH_SW_BASE 0xBE110000
+#define RALINK_ROM_BASE 0xBE118000
+#define RALINK_MSDC_BASE 0xBE130000
+#define RALINK_PCI_BASE 0xBE140000
+#define RALINK_USB_HOST_BASE 0x1E1C0000
+#define RALINK_11N_MAC_BASE 0xBE180000 //Unused
+
+#define RALINK_MCNT_CFG 0xBE000500
+#define RALINK_COMPARE 0xBE000504
+#define RALINK_COUNT 0xBE000508
+
+//Interrupt Controller
+#define RALINK_INTCTL_FE (1<<3)
+#define RALINK_INTCTL_PCIE0 (1<<4)
+#define RALINK_INTCTL_SYSCTL (1<<6)
+#define RALINK_INTCTL_I2C (1<<8)
+#define RALINK_INTCTL_DRAMC (1<<9)
+#define RALINK_INTCTL_PCM (1<<10)
+#define RALINK_INTCTL_HSDMA (1<<11)
+#define RALINK_INTCTL_PIO (1<<12)
+#define RALINK_INTCTL_DMA (1<<13)
+#define RALINK_INTCTL_NFI (1<<14)
+#define RALINK_INTCTL_NFIECC (1<<15)
+#define RALINK_INTCTL_I2S (1<<16)
+#define RALINK_INTCTL_SPI (1<<17)
+#define RALINK_INTCTL_SPDIF (1<<18)
+#define RALINK_INTCTL_CRYPTO (1<<19)
+#define RALINK_INTCTL_SDXC (1<<20)
+#define RALINK_INTCTL_PCTRL (1<<21)
+#define RALINK_INTCTL_USB (1<<22)
+#define RALINK_INTCTL_SWITCH (1<<23)
+#define RALINK_INTCTL_PCIE1 (1<<24)
+#define RALINK_INTCTL_PCIE2 (1<<25)
+#define RALINK_INTCTL_UART1 (1<<26)
+#define RALINK_INTCTL_UART2 (1<<27)
+#define RALINK_INTCTL_UART3 (1<<28)
+#define RALINK_INTCTL_WDTIMER (1<<29)
+#define RALINK_INTCTL_TIMER0 (1<<30)
+#define RALINK_INTCTL_TIMER1 (1<<31)
+
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_MCM_RST (1<<1)
+#define RALINK_HSDMA_RST (1<<2)
+#define RALINK_FE_RST (1<<6)
+#define RALINK_SPDIF_RST (1<<7)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_NAND_RST (1<<15)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UART1_RST (1<<19)
+#define RALINK_UART2_RST (1<<20)
+#define RALINK_UART3_RST (1<<21)
+#define RALINK_ETH_RST (1<<23)
+#define RALINK_PCIE0_RST (1<<24)
+#define RALINK_PCIE1_RST (1<<25)
+#define RALINK_PCIE2_RST (1<<26)
+#define RALINK_AUX_STCK_RST (1<<28)
+#define RALINK_CRYPTO_RST (1<<29)
+#define RALINK_SDXC_RST (1<<30)
+#define RALINK_PPE_RST (1<<31)
+
+//Clock Conf Register
+#define RALINK_PCIE0_CLK_EN (1<<24)
+#define RALINK_PCIE1_CLK_EN (1<<25)
+#define RALINK_PCIE2_CLK_EN (1<<26)
+//#define RALINK_UPHY0_CLK_EN (1<<27)
+//#define RALINK_UPHY1_CLK_EN (1<<28)
+
+//CPU PLL CFG Register
+#define CPLL_SW_CONFIG (0x1UL << 31)
+#define CPLL_MULT_RATIO_SHIFT 16
+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
+#define CPLL_DIV_RATIO_SHIFT 10
+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
+#define BASE_CLOCK 40 /* Mhz */
+
+#define RALINK_TESTSTAT 0xBE000018
+#define RALINK_TESTSTAT2 0xBE00001C
+
+#elif defined (CONFIG_RALINK_MT7628)
+
+#define RALINK_SYSCTL_BASE 0xB0000000
+#define RALINK_TIMER_BASE 0xB0000100
+#define RALINK_INTCL_BASE 0xB0000200
+#define RALINK_MEMCTRL_BASE 0xB0000300
+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
+#define RALINK_MIPS_CNT_BASE 0x10000500
+#define RALINK_PIO_BASE 0xB0000600
+#define RALINK_SPI_SLAVE_BASE 0xB0000700
+#define RALINK_I2C_BASE 0xB0000900
+#define RALINK_I2S_BASE 0xB0000A00
+#define RALINK_SPI_BASE 0xB0000B00
+#define RALINK_UART_LITE1_BASE 0x10000C00
+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
+#define RALINK_UART_LITE2_BASE 0x10000D00
+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
+#define RALINK_UART_LITE3_BASE 0x10000E00
+#define RALINK_PCM_BASE 0xB0002000
+#define RALINK_GDMA_BASE 0xB0002800
+#define RALINK_AES_ENGINE_BASE 0xB0004000
+#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE
+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
+#define RALINK_PPE_BASE 0xB0100C00
+#define RALINK_ETH_SW_BASE 0xB0110000
+#define RALINK_USB_DEV_BASE 0xB0120000
+#define RALINK_MSDC_BASE 0xB0130000
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_11N_MAC_BASE 0xB0180000
+#define RALINK_USB_HOST_BASE 0x101C0000
+
+#define RALINK_MCNT_CFG 0xB0000500
+#define RALINK_COMPARE 0xB0000504
+#define RALINK_COUNT 0xB0000508
+
+
+//Interrupt Controller
+#define RALINK_INTCTL_SYSCTL (1<<0)
+#define RALINK_INTCTL_TIMER0 (1<<1)
+#define RALINK_INTCTL_WDTIMER (1<<2)
+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
+#define RALINK_INTCTL_PCM (1<<4)
+#define RALINK_INTCTL_UART (1<<5)
+#define RALINK_INTCTL_PIO (1<<6)
+#define RALINK_INTCTL_DMA (1<<7)
+#define RALINK_INTCTL_PC (1<<9)
+#define RALINK_INTCTL_I2S (1<<10)
+#define RALINK_INTCTL_SPI (1<<11)
+#define RALINK_INTCTL_UARTLITE (1<<12)
+#define RALINK_INTCTL_CRYPTO (1<<13)
+#define RALINK_INTCTL_ESW (1<<17)
+#define RALINK_INTCTL_UHST (1<<18)
+#define RALINK_INTCTL_UDEV (1<<19)
+#define RALINK_INTCTL_GLOBAL (1<<31)
+
+//Reset Control Register
+#define RALINK_SYS_RST (1<<0)
+#define RALINK_TIMER_RST (1<<8)
+#define RALINK_INTC_RST (1<<9)
+#define RALINK_MC_RST (1<<10)
+#define RALINK_PCM_RST (1<<11)
+#define RALINK_UART_RST (1<<12)
+#define RALINK_PIO_RST (1<<13)
+#define RALINK_DMA_RST (1<<14)
+#define RALINK_I2C_RST (1<<16)
+#define RALINK_I2S_RST (1<<17)
+#define RALINK_SPI_RST (1<<18)
+#define RALINK_UARTL_RST (1<<19)
+#define RALINK_FE_RST (1<<21)
+#define RALINK_UHST_RST (1<<22)
+#define RALINK_ESW_RST (1<<23)
+#define RALINK_EPHY_RST (1<<24)
+#define RALINK_UDEV_RST (1<<25)
+#define RALINK_PCIE0_RST (1<<26)
+#define RALINK_PCIE1_RST (1<<27)
+#define RALINK_MIPS_CNT_RST (1<<28)
+#define RALINK_CRYPTO_RST (1<<29)
+
+//Clock Conf Register
+#define RALINK_UPHY0_CLK_EN (1<<25)
+#define RALINK_UPHY1_CLK_EN (1<<22)
+#define RALINK_PCIE0_CLK_EN (1<<26)
+#define RALINK_PCIE1_CLK_EN (1<<27)
+
+//CPU PLL CFG Register
+#define CPLL_SW_CONFIG (0x1UL << 31)
+#define CPLL_MULT_RATIO_SHIFT 16
+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
+#define CPLL_DIV_RATIO_SHIFT 10
+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
+#define BASE_CLOCK 40 /* Mhz */
+
+#endif
+#endif
Index: linux-3.14.16/arch/mips/include/asm/rt2880/serial_rt2880.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/serial_rt2880.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,443 @@
+/**************************************************************************
+ *
+ * BRIEF MODULE DESCRIPTION
+ * serial port definition for Ralink RT2880 solution
+ *
+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2007 Bruce Chang
+ *
+ * Initial Release
+ *
+ *
+ *
+ **************************************************************************
+ */
+
+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
+#define RT2880_UART_RBR_OFFSET 0x00
+#define RT2880_UART_TBR_OFFSET 0x00
+#define RT2880_UART_IER_OFFSET 0x04
+#define RT2880_UART_IIR_OFFSET 0x08
+#define RT2880_UART_FCR_OFFSET 0x08
+#define RT2880_UART_LCR_OFFSET 0x0C
+#define RT2880_UART_MCR_OFFSET 0x10
+#define RT2880_UART_LSR_OFFSET 0x14
+#define RT2880_UART_DLL_OFFSET 0x00
+#define RT2880_UART_DLM_OFFSET 0x04
+#else
+#define RT2880_UART_RBR_OFFSET 0x00
+#define RT2880_UART_TBR_OFFSET 0x04
+#define RT2880_UART_IER_OFFSET 0x08
+#define RT2880_UART_IIR_OFFSET 0x0C
+#define RT2880_UART_FCR_OFFSET 0x10
+#define RT2880_UART_LCR_OFFSET 0x14
+#define RT2880_UART_MCR_OFFSET 0x18
+#define RT2880_UART_LSR_OFFSET 0x1C
+#define RT2880_UART_DLL_OFFSET 0x2C
+#define RT2880_UART_DLM_OFFSET 0x30
+#endif
+
+#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET)
+#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET)
+#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET)
+#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET)
+#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET)
+#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET)
+#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET)
+#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET)
+#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET)
+#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET)
+
+
+#if defined (CONFIG_RALINK_RT2880) || \
+ defined (CONFIG_RALINK_RT2883) || \
+ defined (CONFIG_RALINK_RT3883) || \
+ defined (CONFIG_RALINK_RT3352) || \
+ defined (CONFIG_RALINK_RT5350) || \
+ defined (CONFIG_RALINK_RT6855) || \
+ defined (CONFIG_RALINK_MT7620) || \
+ defined (CONFIG_RALINK_RT3052)
+
+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
+
+#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */
+#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only
+ */
+
+#define UART_IER 8 /* Out: Interrupt Enable Register */
+#define UART_FCTR 8 /* (LCR=BF) Feature Control Register
+ * XR16C85x only
+ */
+
+#define UART_IIR 12 /* In: Interrupt ID Register */
+#define UART_EFR 12 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_FCR 16 /* Out: FIFO Control Register */
+#define UART_LCR 20 /* Out: Line Control Register */
+#define UART_MCR 24 /* Out: Modem Control Register */
+#define UART_LSR 28 /* In: Line Status Register */
+#define UART_MSR 32 /* In: Modem Status Register */
+#define UART_SCR 36 /* I/O: Scratch Register */
+#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */
+/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause
+ * unpredictable values to be written to the Divisor Latch
+ */
+#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */
+
+#else
+
+#define UART_RX 0 /* In: Receive buffer */
+#define UART_TX 0 /* Out: Transmit buffer */
+#define UART_DLL 0 /* Out: Divisor Latch Low */
+#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels */
+
+#define UART_DLM 4 /* Out: Divisor Latch High */
+#define UART_IER 4 /* Out: Interrupt Enable Register */
+#define UART_FCTR 4 /* Feature Control Register */
+
+#define UART_IIR 8 /* In: Interrupt ID Register */
+#define UART_FCR 8 /* Out: FIFO Control Register */
+#define UART_EFR 8 /* I/O: Extended Features Register */
+
+#define UART_LCR 12 /* Out: Line Control Register */
+#define UART_MCR 16 /* Out: Modem Control Register */
+#define UART_LSR 20 /* In: Line Status Register */
+#define UART_MSR 24 /* In: Modem Status Register */
+#define UART_SCR 28 /* I/O: Scratch Register */
+#define UART_EMSR 28 /* Extended Mode Select Register */
+
+#endif
+/*
+ * DLAB=0
+ */
+//#define UART_IER 1 /* Out: Interrupt Enable Register */
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
+
+//#define UART_IIR 2 /* In: Interrupt ID Register */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+//#define UART_FCR 2 /* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
+ * PC16550D: 1 4 8 14 xx xx xx xx
+ * TI16C550A: 1 4 8 14 xx xx xx xx
+ * TI16C550C: 1 4 8 14 xx xx xx xx
+ * ST16C550: 1 4 8 14 xx xx xx xx
+ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
+ * NS16C552: 1 4 8 14 xx xx xx xx
+ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
+ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
+ * TI16C752: 8 16 56 60 8 16 32 56
+ */
+#define UART_FCR_R_TRIG_00 0x00
+#define UART_FCR_R_TRIG_01 0x40
+#define UART_FCR_R_TRIG_10 0x80
+#define UART_FCR_R_TRIG_11 0xc0
+#define UART_FCR_T_TRIG_00 0x00
+#define UART_FCR_T_TRIG_01 0x10
+#define UART_FCR_T_TRIG_10 0x20
+#define UART_FCR_T_TRIG_11 0x30
+
+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
+
+//#define UART_LCR 3 /* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+//#define UART_MCR 4 /* Out: Modem Control Register */
+#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2 0x08 /* Out2 complement */
+#define UART_MCR_OUT1 0x04 /* Out1 complement */
+#define UART_MCR_RTS 0x02 /* RTS complement */
+#define UART_MCR_DTR 0x01 /* DTR complement */
+
+//#define UART_LSR 5 /* In: Line Status Register */
+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
+#define UART_LSR_FE 0x08 /* Frame error indicator */
+#define UART_LSR_PE 0x04 /* Parity error indicator */
+#define UART_LSR_OE 0x02 /* Overrun error indicator */
+#define UART_LSR_DR 0x01 /* Receiver data ready */
+
+//#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
+
+//#define UART_SCR 7 /* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+//#define UART_DLL 0 /* Out: Divisor Latch Low */
+//#define UART_DLM 1 /* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+//#define UART_EFR 2 /* I/O: Extended Features Register */
+#define UART_EFR_CTS 0x80 /* CTS flow control */
+#define UART_EFR_RTS 0x40 /* RTS flow control */
+#define UART_EFR_SCD 0x20 /* Special character detect */
+#define UART_EFR_ECB 0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1 4 /* I/O: Xon character 1 */
+#define UART_XON2 5 /* I/O: Xon character 2 */
+#define UART_XOFF1 6 /* I/O: Xoff character 1 */
+#define UART_XOFF2 7 /* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR 6 /* I/O: transmission control register */
+#define UART_TI752_TLR 7 /* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
+// * In: Fifo count
+// * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1 0x01
+#define UART_TRG_4 0x04
+#define UART_TRG_8 0x08
+#define UART_TRG_16 0x10
+#define UART_TRG_32 0x20
+#define UART_TRG_64 0x40
+#define UART_TRG_96 0x60
+#define UART_TRG_120 0x78
+#define UART_TRG_128 0x80
+
+//#define UART_FCTR 1 /* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY 0x01
+#define UART_FCTR_RTS_6DELAY 0x02
+#define UART_FCTR_RTS_8DELAY 0x03
+#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
+#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
+#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
+#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
+#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+//#define UART_EMSR 7 /* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
+#define UART_IER_UUE 0x40 /* UART Unit Enable */
+#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
+#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
+#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
+#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
+
+
+
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR 0x01 /* Additional Status Register */
+#define UART_RFL 0x03 /* Receiver FIFO level */
+#define UART_TFL 0x04 /* Transmitter FIFO level */
+#define UART_ICR 0x05 /* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR 0x00 /* Additional Control Register */
+#define UART_CPR 0x01 /* Clock Prescalar Register */
+#define UART_TCR 0x02 /* Times Clock Register */
+#define UART_CKS 0x03 /* Clock Select Register */
+#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
+#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
+#define UART_FCL 0x06 /* Flow Control Level Lower */
+#define UART_FCH 0x07 /* Flow Control Level Higher */
+#define UART_ID1 0x08 /* ID #1 */
+#define UART_ID2 0x09 /* ID #2 */
+#define UART_ID3 0x0A /* ID #3 */
+#define UART_REV 0x0B /* Revision */
+#define UART_CSR 0x0C /* Channel Software Reset */
+#define UART_NMR 0x0D /* Nine-bit Mode Register */
+#define UART_CTR 0xFF
+
+/*
+ * The 16C950 Additional Control Reigster
+ */
+#define UART_ACR_RXDIS 0x01 /* Receiver disable */
+#define UART_ACR_TXDIS 0x02 /* Receiver disable */
+#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
+#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
+#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
+#define UART_ACR_ASREN 0x80 /* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies. One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
+#define UART_OMAP_EBLR 0x12 /* BOF length register */
+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER 0x14 /* Module version register */
+#define UART_OMAP_SYSC 0x15 /* System configuration register */
+#define UART_OMAP_SYSS 0x16 /* System status register */
+
+
Index: linux-3.14.16/arch/mips/include/asm/rt2880/sizes.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/sizes.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size definitions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */
Index: linux-3.14.16/arch/mips/include/asm/rt2880/surfboard.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/surfboard.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ */
+#ifndef _SURFBOARD_H
+#define _SURFBOARD_H
+
+#include <asm/addrspace.h>
+
+
+
+/*
+ * Surfboard system clock.
+ * This is the default value and maybe overidden by System Clock passed on the
+ * command line (sysclk=).
+ */
+#define SURFBOARD_SYSTEM_CLOCK (125000000)
+
+/*
+ * Surfboard UART base baud rate = System Clock / 16.
+ * Ex. (14.7456 MHZ / 16) = 921600
+ * (32.0000 MHZ / 16) = 2000000
+ */
+#define SURFBOARD_BAUD_DIV (16)
+#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV)
+
+/*
+ * Maximum number of IDE Controllers
+ * Surfboard only has one ide (ide0), so only 2 drives are
+ * possible. (no need to check for more hwifs.)
+ */
+//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */
+#define MAX_IDE_HWIFS (2) /* Graphite board */
+
+#define GCMP_BASE_ADDR 0x1fbf8000
+#define GCMP_ADDRSPACE_SZ (256 * 1024)
+
+/*
+ * * GIC Specific definitions
+ * */
+#define GIC_BASE_ADDR 0x1fbc0000
+#define GIC_ADDRSPACE_SZ (128 * 1024)
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE)
+
+/* GIC's Nomenclature for Core Interrupt Pins */
+#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
+#define GIC_CPU_INT1 1 /* . */
+#define GIC_CPU_INT2 2 /* . */
+#define GIC_CPU_INT3 3 /* . */
+#define GIC_CPU_INT4 4 /* . */
+#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+
+#endif /* !(_SURFBOARD_H) */
Index: linux-3.14.16/arch/mips/include/asm/rt2880/surfboardint.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/surfboardint.h 2014-08-24 15:51:48.530654066 +0200
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Surfboard interrupt controller.
+ *
+ */
+#ifndef _SURFBOARDINT_H
+#define _SURFBOARDINT_H
+
+/* Number of IRQ supported on hw interrupt 0. */
+#if defined (CONFIG_RALINK_RT2880)
+#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */
+#define SURFBOARDINT_GPIO 7 /* GPIO */
+#define SURFBOARDINT_UART1 8 /* UART Lite */
+#define SURFBOARDINT_UART 9 /* UART */
+#define SURFBOARDINT_TIMER0 10 /* timer0 */
+#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620)
+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
+#define SURFBOARDINT_GPIO 6 /* GPIO */
+#define SURFBOARDINT_DMA 7 /* DMA */
+#define SURFBOARDINT_NAND 8 /* NAND */
+#define SURFBOARDINT_PC 9 /* Performance counter */
+#define SURFBOARDINT_I2S 10 /* I2S */
+#define SURFBOARDINT_SDXC 14 /* SDXC */
+#define SURFBOARDINT_ESW 17 /* ESW */
+#define SURFBOARDINT_UART1 12 /* UART Lite */
+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
+#define SURFBOARDINT_TIMER0 33 /* timer0 */
+#define SURFBOARDINT_WDG 34 /* watch dog */
+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
+#define SURFBOARDINT_PCM 36 /* PCM */
+#define SURFBOARDINT_UART 37 /* UART */
+#define RALINK_INT_PCIE0 13 /* PCIE0 */
+#define RALINK_INT_PCIE1 14 /* PCIE1 */
+
+
+#elif defined (CONFIG_RALINK_MT7628)
+#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */
+#define SURFBOARDINT_PCM 4 /* PCM */
+#define SURFBOARDINT_GPIO 6 /* GPIO */
+#define SURFBOARDINT_DMA 7 /* DMA */
+#define SURFBOARDINT_PC 9 /* Performance counter */
+#define SURFBOARDINT_I2S 10 /* I2S */
+#define SURFBOARDINT_SPI 11 /* SPI */
+#define SURFBOARDINT_AES 13 /* AES */
+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
+#define SURFBOARDINT_SDXC 14 /* SDXC */
+#define SURFBOARDINT_ESW 17 /* ESW */
+#define SURFBOARDINT_USB 18 /* USB */
+#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */
+#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */
+#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */
+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1
+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2
+#define SURFBOARDINT_WDG 23 /* WDG timer */
+#define SURFBOARDINT_TIMER0 24 /* Timer0 */
+#define SURFBOARDINT_TIMER1 25 /* Timer1 */
+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
+#define RALINK_INT_PCIE0 2 /* PCIE0 */
+
+
+#elif defined (CONFIG_RALINK_MT7621)
+
+#define SURFBOARDINT_FE 3 /* FE */
+#define SURFBOARDINT_PCIE0 4 /* PCIE0 */
+#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */
+#define SURFBOARDINT_I2C 8 /* I2C */
+#define SURFBOARDINT_DRAMC 9 /* DRAMC */
+#define SURFBOARDINT_PCM 10 /* PCM */
+#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */
+#define SURFBOARDINT_GPIO 12 /* GPIO */
+#define SURFBOARDINT_DMA 13 /* GDMA */
+#define SURFBOARDINT_NAND 14 /* NAND */
+#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */
+#define SURFBOARDINT_I2S 16 /* I2S */
+#define SURFBOARDINT_SPI 17 /* SPI */
+#define SURFBOARDINT_SPDIF 18 /* SPDIF */
+#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */
+#define SURFBOARDINT_SDXC 20 /* SDXC */
+#define SURFBOARDINT_PCTRL 21 /* Performance counter */
+#define SURFBOARDINT_USB 22 /* USB */
+#define SURFBOARDINT_ESW 31 /* Switch */
+#define SURFBOARDINT_PCIE1 24 /* PCIE1 */
+#define SURFBOARDINT_PCIE2 25 /* PCIE2 */
+#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */
+#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */
+#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */
+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0
+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1
+
+#define SURFBOARDINT_WDG 29 /* WDG timer */
+#define SURFBOARDINT_TIMER0 30 /* Timer0 */
+#define SURFBOARDINT_TIMER1 31 /* Timer1 */
+
+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
+
+#elif defined (CONFIG_RALINK_RT3883)
+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
+#define SURFBOARDINT_GPIO 6 /* GPIO */
+#define SURFBOARDINT_DMA 7 /* DMA */
+#define SURFBOARDINT_NAND 8 /* NAND */
+#define SURFBOARDINT_PC 9 /* Performance counter */
+#define SURFBOARDINT_I2S 10 /* I2S */
+#define SURFBOARDINT_UART1 12 /* UART Lite */
+#define SURFBOARDINT_PCI 18 /* PCI */
+#define SURFBOARDINT_UDEV 19 /* USB Device */
+#define SURFBOARDINT_UHST 20 /* USB Host */
+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
+#define SURFBOARDINT_TIMER0 33 /* timer0 */
+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
+#define SURFBOARDINT_PCM 36 /* PCM */
+#define SURFBOARDINT_UART 37 /* UART */
+#endif
+
+#define SURFBOARDINT_END 64
+#define RT2880_INTERINT_START 40
+
+/* Global interrupt bit definitions */
+#define C_SURFBOARD_GLOBAL_INT 31
+#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT)
+
+/* added ??? */
+#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310)
+#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314)
+/* end of added, bobtseng */
+
+/*
+ * Surfboard registers are memory mapped on 32-bit aligned boundaries and
+ * only word access are allowed.
+ */
+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT
+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT
+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL
+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE
+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET
+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR
+#else
+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0)
+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4)
+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20)
+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30)
+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34)
+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38)
+#endif
+
+/* bobtseng added ++, 2006.3.6. */
+#define read_32bit_cp0_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "mfc0\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define write_32bit_cp0_register(register,value) \
+ __asm__ __volatile__( \
+ "mtc0\t%0,"STR(register)"\n\t" \
+ "nop" \
+ : : "r" (value));
+
+/* bobtseng added --, 2006.3.6. */
+
+void surfboardint_init(void);
+u32 get_surfboard_sysclk(void);
+
+
+#endif /* !(_SURFBOARDINT_H) */
Index: linux-3.14.16/arch/mips/include/asm/rt2880/war.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/arch/mips/include/asm/rt2880/war.h 2014-08-24 15:51:48.534654066 +0200
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#define MIPS_CACHE_SYNC_WAR 1
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
Index: linux-3.14.16/drivers/net/ethernet/Kconfig
===================================================================
--- linux-3.14.16.orig/drivers/net/ethernet/Kconfig 2014-08-24 15:51:48.510654065 +0200
+++ linux-3.14.16/drivers/net/ethernet/Kconfig 2014-08-24 15:51:48.534654066 +0200
@@ -135,6 +135,7 @@
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/ralink/Kconfig"
+source "drivers/net/ethernet/raeth/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
Index: linux-3.14.16/drivers/net/ethernet/Makefile
===================================================================
--- linux-3.14.16.orig/drivers/net/ethernet/Makefile 2014-08-24 15:51:48.510654065 +0200
+++ linux-3.14.16/drivers/net/ethernet/Makefile 2014-08-24 15:51:48.534654066 +0200
@@ -57,6 +57,7 @@
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_RALINK) += ralink/
+obj-$(CONFIG_RAETH) += raeth/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
Index: linux-3.14.16/drivers/net/ethernet/raeth/Kconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/Kconfig 2014-08-24 15:51:48.534654066 +0200
@@ -0,0 +1,344 @@
+
+config RA_NAT_NONE
+ bool
+ default y
+ depends on RALINK
+
+config MT7621_ASIC
+ bool
+ default y
+ depends on SOC_MT7621
+
+config RALINK_MT7621
+ bool
+ default y
+ depends on SOC_MT7621
+
+config RAETH
+ tristate "Ralink GMAC"
+ depends on SOC_MT7621
+ ---help---
+ This driver supports Ralink gigabit ethernet family of
+ adapters.
+
+config PDMA_NEW
+ bool
+ default y if (RALINK_MT7620 || RALINK_MT7621)
+ depends on RAETH
+
+config RAETH_SCATTER_GATHER_RX_DMA
+ bool
+ default y if (RALINK_MT7620 || RALINK_MT7621)
+ depends on RAETH
+
+
+choice
+ prompt "Network BottomHalves"
+ depends on RAETH
+ default RA_NETWORK_WORKQUEUE_BH
+
+ config RA_NETWORK_TASKLET_BH
+ bool "Tasklet"
+
+ config RA_NETWORK_WORKQUEUE_BH
+ bool "Work Queue"
+
+ config RAETH_NAPI
+ bool "NAPI"
+
+endchoice
+
+#config TASKLET_WORKQUEUE_SW
+# bool "Tasklet and Workqueue switch"
+# depends on RA_NETWORK_TASKLET_BH
+
+config RAETH_SKB_RECYCLE_2K
+ bool "SKB Recycling"
+ depends on RAETH
+
+config RAETH_SPECIAL_TAG
+ bool "Ralink Special Tag (0x810x)"
+ depends on RAETH && RT_3052_ESW
+
+#config RAETH_JUMBOFRAME
+# bool "Jumbo Frame up to 4K bytes"
+# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628)
+
+config RAETH_CHECKSUM_OFFLOAD
+ bool "TCP/UDP/IP checksum offload"
+ default y
+ depends on RAETH && !RALINK_RT2880
+
+#config RAETH_SW_FC
+# bool "When TX ring is full, inform kernel stop transmit and stop RX handler"
+# default n
+# depends on RAETH
+
+config 32B_DESC
+ bool "32bytes TX/RX description"
+ default n
+ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621)
+ ---help---
+ At this moment, you cannot enable 32B description with Multiple RX ring at the same time.
+
+config RAETH_LRO
+ bool "LRO (Large Receive Offload )"
+ select INET_LRO
+ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621)
+
+config RAETH_HW_VLAN_TX
+ bool "Transmit VLAN HW (DoubleVLAN is not supported)"
+ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628)
+ ---help---
+ Please disable HW_VLAN_TX if you need double vlan
+
+config RAETH_HW_VLAN_RX
+ bool "Receive VLAN HW (DoubleVLAN is not supported)"
+ depends on RAETH && RALINK_MT7621
+ ---help---
+ Please disable HW_VLAN_RX if you need double vlan
+
+config RAETH_TSO
+ bool "TSOV4 (Tcp Segmentaton Offload)"
+ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621
+
+config RAETH_TSOV6
+ bool "TSOV6 (Tcp Segmentaton Offload)"
+ depends on RAETH_TSO
+
+config RAETH_RW_PDMAPTR_FROM_VAR
+ bool
+ default y if RALINK_RT6855A || RALINK_MT7620
+ depends on RAETH
+
+#config RAETH_QOS
+# bool "QoS Feature"
+# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO
+
+choice
+ prompt "QoS Type"
+ depends on RAETH_QOS
+ default DSCP_QOS_DSCP
+
+config RAETH_QOS_DSCP_BASED
+ bool "DSCP-based"
+ depends on RAETH_QOS
+
+config RAETH_QOS_VPRI_BASED
+ bool "VPRI-based"
+ depends on RAETH_QOS
+
+endchoice
+
+config RAETH_QDMA
+ bool "Choose QDMA instead PDMA"
+ default n
+ depends on RAETH && RALINK_MT7621
+
+choice
+ prompt "GMAC is connected to"
+ depends on RAETH
+ default GE1_RGMII_FORCE_1000
+
+config GE1_MII_FORCE_100
+ bool "MII_FORCE_100 (10/100M Switch)"
+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
+
+config GE1_MII_AN
+ bool "MII_AN (100Phy)"
+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
+
+config GE1_RVMII_FORCE_100
+ bool "RvMII_FORCE_100 (CPU)"
+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
+
+config GE1_RGMII_FORCE_1000
+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
+ depends on (RALINK_RT2880 || RALINK_RT3883)
+ select RALINK_SPI
+
+config GE1_RGMII_FORCE_1000
+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
+ depends on (RALINK_MT7621)
+ select RT_3052_ESW
+
+config GE1_TRGMII_FORCE_1200
+ bool "TRGMII_FORCE_1200 (GigaSW, CPU)"
+ depends on (RALINK_MT7621)
+ select RT_3052_ESW
+
+config GE1_RGMII_AN
+ bool "RGMII_AN (GigaPhy)"
+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
+
+config GE1_RGMII_NONE
+ bool "NONE (NO CONNECT)"
+ depends on (RALINK_MT7621)
+
+endchoice
+
+config RT_3052_ESW
+ bool "Ralink Embedded Switch"
+ default y
+ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628)
+
+config LAN_WAN_SUPPORT
+ bool "LAN/WAN Partition"
+ depends on RAETH_ROUTER || RT_3052_ESW
+
+choice
+ prompt "Switch Board Layout Type"
+ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000
+ default WAN_AT_P0
+
+ config WAN_AT_P4
+ bool "LLLL/W"
+
+ config WAN_AT_P0
+ bool "W/LLLL"
+endchoice
+
+config RALINK_VISTA_BASIC
+ bool 'Vista Basic Logo for IC+ 175C'
+ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883)
+
+config ESW_DOUBLE_VLAN_TAG
+ bool
+ default y if RT_3052_ESW
+
+config RAETH_HAS_PORT4
+ bool "Port 4 Support"
+ depends on RAETH && RALINK_MT7620
+choice
+ prompt "Target Mode"
+ depends on RAETH_HAS_PORT4
+ default P4_RGMII_TO_MAC_MODE
+
+ config P4_MAC_TO_PHY_MODE
+ bool "Giga_Phy (RGMII)"
+ config GE_RGMII_MT7530_P0_AN
+ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)"
+ config GE_RGMII_MT7530_P4_AN
+ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)"
+ config P4_RGMII_TO_MAC_MODE
+ bool "Giga_SW/iNIC (RGMII)"
+ config P4_MII_TO_MAC_MODE
+ bool "External_CPU (MII_RvMII)"
+ config P4_RMII_TO_MAC_MODE
+ bool "External_CPU (RvMII_MII)"
+endchoice
+
+config MAC_TO_GIGAPHY_MODE_ADDR2
+ hex "Port4 Phy Address"
+ default 0x4
+ depends on P4_MAC_TO_PHY_MODE
+
+config RAETH_HAS_PORT5
+ bool "Port 5 Support"
+ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)
+choice
+ prompt "Target Mode"
+ depends on RAETH_HAS_PORT5
+ default P5_RGMII_TO_MAC_MODE
+
+ config P5_MAC_TO_PHY_MODE
+ bool "Giga_Phy (RGMII)"
+ config P5_RGMII_TO_MAC_MODE
+ bool "Giga_SW/iNIC (RGMII)"
+ config P5_RGMII_TO_MT7530_MODE
+ bool "MT7530 Giga_SW (RGMII)"
+ depends on RALINK_MT7620
+ config P5_MII_TO_MAC_MODE
+ bool "External_CPU (MII_RvMII)"
+ config P5_RMII_TO_MAC_MODE
+ bool "External_CPU (RvMII_MII)"
+endchoice
+
+config MAC_TO_GIGAPHY_MODE_ADDR
+ hex "GE1 Phy Address"
+ default 0x1F
+ depends on GE1_MII_AN || GE1_RGMII_AN
+
+config MAC_TO_GIGAPHY_MODE_ADDR
+ hex "Port5 Phy Address"
+ default 0x5
+ depends on P5_MAC_TO_PHY_MODE
+
+config RAETH_GMAC2
+ bool "GMAC2 Support"
+ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621)
+
+choice
+ prompt "GMAC2 is connected to"
+ depends on RAETH_GMAC2
+ default GE2_RGMII_AN
+
+config GE2_MII_FORCE_100
+ bool "MII_FORCE_100 (10/100M Switch)"
+ depends on RAETH_GMAC2
+
+config GE2_MII_AN
+ bool "MII_AN (100Phy)"
+ depends on RAETH_GMAC2
+
+config GE2_RVMII_FORCE_100
+ bool "RvMII_FORCE_100 (CPU)"
+ depends on RAETH_GMAC2
+
+config GE2_RGMII_FORCE_1000
+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
+ depends on RAETH_GMAC2
+ select RALINK_SPI
+
+config GE2_RGMII_AN
+ bool "RGMII_AN (GigaPhy)"
+ depends on RAETH_GMAC2
+
+config GE2_INTERNAL_GPHY
+ bool "Internal GigaPHY"
+ depends on RAETH_GMAC2
+ select LAN_WAN_SUPPORT
+
+endchoice
+
+config GE_RGMII_INTERNAL_P0_AN
+ bool
+ depends on GE2_INTERNAL_GPHY
+ default y if WAN_AT_P0
+
+config GE_RGMII_INTERNAL_P4_AN
+ bool
+ depends on GE2_INTERNAL_GPHY
+ default y if WAN_AT_P4
+
+config MAC_TO_GIGAPHY_MODE_ADDR2
+ hex
+ default 0 if GE_RGMII_INTERNAL_P0_AN
+ default 4 if GE_RGMII_INTERNAL_P4_AN
+ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN
+
+config MAC_TO_GIGAPHY_MODE_ADDR2
+ hex "GE2 Phy Address"
+ default 0x1E
+ depends on GE2_MII_AN || GE2_RGMII_AN
+
+#force 100M
+config RAETH_ROUTER
+bool
+default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100
+
+#force 1000M
+config MAC_TO_MAC_MODE
+bool
+default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000
+depends on (RALINK_RT2880 || RALINK_RT3883)
+
+#AN
+config GIGAPHY
+bool
+default y if GE1_RGMII_AN || GE2_RGMII_AN
+
+#AN
+config 100PHY
+bool
+default y if GE1_MII_AN || GE2_MII_AN
Index: linux-3.14.16/drivers/net/ethernet/raeth/Makefile
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/Makefile 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,7 @@
+obj-$(CONFIG_RAETH) += raeth.o
+raeth-objs := ra_mac.o mii_mgr.o
+raeth-objs += raether_pdma.o
+EXTRA_CFLAGS += -DWORKQUEUE_BH
+#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING
+
+raeth-objs += raether.o
Index: linux-3.14.16/drivers/net/ethernet/raeth/ethtool_readme.txt
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/ethtool_readme.txt 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,44 @@
+
+Ethtool readme for selecting different PHY address.
+
+Before doing any ethtool command you should make sure the current PHY
+address is expected. The default PHY address is 1(port 1).
+
+You can change current PHY address to X(0~4) by doing follow command:
+# echo X > /proc/rt2880/gmac
+
+Ethtool command also would show the current PHY address as following.
+
+# ethtool eth2
+Settings for eth2:
+ Supported ports: [ TP MII ]
+ Supported link modes: 10baseT/Half 10baseT/Full
+ 100baseT/Half 100baseT/Full
+ Supports auto-negotiation: Yes
+ Advertised link modes: 10baseT/Half 10baseT/Full
+ 100baseT/Half 100baseT/Full
+ Advertised auto-negotiation: No
+ Speed: 10Mb/s
+ Duplex: Full
+ Port: MII
+ PHYAD: 1
+ Transceiver: internal
+ Auto-negotiation: off
+ Current message level: 0x00000000 (0)
+ Link detected: no
+
+
+The "PHYAD" field shows the current PHY address.
+
+
+
+Usage example
+1) show port1 info
+# echo 1 > /proc/rt2880/gmac # change phy address to 1
+# ethtool eth2
+
+2) show port0 info
+# echo 0 > /proc/rt2880/gmac # change phy address to 0
+# ethtool eth2
+
+
Index: linux-3.14.16/drivers/net/ethernet/raeth/mii_mgr.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/mii_mgr.c 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,166 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/netdevice.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
+#include <asm/rt2880/rt_mmap.h>
+#endif
+
+#include "ra2882ethreg.h"
+#include "raether.h"
+
+
+#define PHY_CONTROL_0 0x0004
+#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0)
+#define enable_mdio(x)
+
+
+u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
+{
+ u32 volatile status = 0;
+ u32 rc = 0;
+ unsigned long volatile t_start = jiffies;
+ u32 volatile data = 0;
+
+ /* We enable mdio gpio purpose register, and disable it when exit. */
+ enable_mdio(1);
+
+ // make sure previous read operation is complete
+ while (1) {
+ // 0 : Read/write operation complete
+ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
+ {
+ break;
+ }
+ else if (time_after(jiffies, t_start + 5*HZ)) {
+ enable_mdio(0);
+ printk("\n MDIO Read operation is ongoing !!\n");
+ return rc;
+ }
+ }
+
+ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25);
+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
+ data |= (1<<31);
+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
+
+
+ // make sure read operation is complete
+ t_start = jiffies;
+ while (1) {
+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) {
+ status = sysRegRead(MDIO_PHY_CONTROL_0);
+ *read_data = (u32)(status & 0x0000FFFF);
+
+ enable_mdio(0);
+ return 1;
+ }
+ else if (time_after(jiffies, t_start+5*HZ)) {
+ enable_mdio(0);
+ printk("\n MDIO Read operation is ongoing and Time Out!!\n");
+ return 0;
+ }
+ }
+}
+
+u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
+{
+ unsigned long volatile t_start=jiffies;
+ u32 volatile data;
+
+ enable_mdio(1);
+
+ // make sure previous write operation is complete
+ while(1) {
+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
+ {
+ break;
+ }
+ else if (time_after(jiffies, t_start + 5 * HZ)) {
+ enable_mdio(0);
+ printk("\n MDIO Write operation ongoing\n");
+ return 0;
+ }
+ }
+ /*add 1 us delay to make sequencial write more robus*/
+ udelay(1);
+
+ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data;
+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
+ data |= (1<<31);
+ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation
+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
+
+ t_start = jiffies;
+
+ // make sure write operation is complete
+ while (1) {
+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete
+ {
+ enable_mdio(0);
+ return 1;
+ }
+ else if (time_after(jiffies, t_start + 5 * HZ)) {
+ enable_mdio(0);
+ printk("\n MDIO Write operation Time Out\n");
+ return 0;
+ }
+ }
+}
+
+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
+{
+ u32 low_word;
+ u32 high_word;
+ if(phy_addr==31)
+ {
+ //phase1: write page address phase
+ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) {
+ //phase2: write address & read low word phase
+ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) {
+ //phase3: write address & read high word phase
+ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) {
+ *read_data = (high_word << 16) | (low_word & 0xFFFF);
+ return 1;
+ }
+ }
+ }
+ } else
+ {
+ if(__mii_mgr_read(phy_addr, phy_register, read_data)) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
+{
+ if(phy_addr == 31)
+ {
+ //phase1: write page address phase
+ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) {
+ //phase2: write address & read low word phase
+ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) {
+ //phase3: write address & read high word phase
+ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) {
+ return 1;
+ }
+ }
+ }
+ } else
+ {
+ if(__mii_mgr_write(phy_addr, phy_register, write_data)) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(mii_mgr_write);
+EXPORT_SYMBOL(mii_mgr_read);
Index: linux-3.14.16/drivers/net/ethernet/raeth/ra2882ethreg.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/ra2882ethreg.h 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,1268 @@
+#ifndef RA2882ETHREG_H
+#define RA2882ETHREG_H
+
+#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h
+#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <asm/rt2880/rt_mmap.h>
+#endif
+#include "raether.h"
+
+#ifdef WORKQUEUE_BH
+#include <linux/workqueue.h>
+#endif // WORKQUEUE_BH //
+#ifdef CONFIG_RAETH_LRO
+#include <linux/inet_lro.h>
+#endif
+
+#define MAX_PACKET_SIZE 1514
+#define MIN_PACKET_SIZE 60
+
+#define phys_to_bus(a) (a & 0x1FFFFFFF)
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
+#define BIT(x) ((1 << x))
+#endif
+#define ETHER_ADDR_LEN 6
+
+/* Phy Vender ID list */
+
+#define EV_ICPLUS_PHY_ID0 0x0243
+#define EV_ICPLUS_PHY_ID1 0x0D90
+#define EV_MARVELL_PHY_ID0 0x0141
+#define EV_MARVELL_PHY_ID1 0x0CC2
+#define EV_VTSS_PHY_ID0 0x0007
+#define EV_VTSS_PHY_ID1 0x0421
+
+/*
+ FE_INT_STATUS
+*/
+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
+
+#define RX_COHERENT BIT(31)
+#define RX_DLY_INT BIT(30)
+#define TX_COHERENT BIT(29)
+#define TX_DLY_INT BIT(28)
+
+#define RX_DONE_INT1 BIT(17)
+#define RX_DONE_INT0 BIT(16)
+
+#define TX_DONE_INT3 BIT(3)
+#define TX_DONE_INT2 BIT(2)
+#define TX_DONE_INT1 BIT(1)
+#define TX_DONE_INT0 BIT(0)
+
+#if defined (CONFIG_RALINK_MT7621)
+#define RLS_COHERENT BIT(29)
+#define RLS_DLY_INT BIT(28)
+#define RLS_DONE_INT BIT(0)
+#endif
+
+#else
+//#define CNT_PPE_AF BIT(31)
+//#define CNT_GDM_AF BIT(29)
+#define PSE_P2_FC BIT(26)
+#define GDM_CRC_DROP BIT(25)
+#define PSE_BUF_DROP BIT(24)
+#define GDM_OTHER_DROP BIT(23)
+#define PSE_P1_FC BIT(22)
+#define PSE_P0_FC BIT(21)
+#define PSE_FQ_EMPTY BIT(20)
+#define GE1_STA_CHG BIT(18)
+#define TX_COHERENT BIT(17)
+#define RX_COHERENT BIT(16)
+
+#define TX_DONE_INT3 BIT(11)
+#define TX_DONE_INT2 BIT(10)
+#define TX_DONE_INT1 BIT(9)
+#define TX_DONE_INT0 BIT(8)
+#define RX_DONE_INT1 RX_DONE_INT0
+#define RX_DONE_INT0 BIT(2)
+#define TX_DLY_INT BIT(1)
+#define RX_DLY_INT BIT(0)
+#endif
+
+#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \
+ TX_DONE_INT1 | TX_DONE_INT0 | \
+ RX_DONE_INT0 )
+
+#if defined (CONFIG_RALINK_MT7621)
+#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1)
+#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT)
+
+#define NUM_QDMA_PAGE 256
+#define QDMA_PAGE_SIZE 2048
+#endif
+/*
+ * SW_INT_STATUS
+ */
+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
+#define PORT0_QUEUE_FULL BIT(14) //port0 queue full
+#define PORT1_QUEUE_FULL BIT(15) //port1 queue full
+#define PORT2_QUEUE_FULL BIT(16) //port2 queue full
+#define PORT3_QUEUE_FULL BIT(17) //port3 queue full
+#define PORT4_QUEUE_FULL BIT(18) //port4 queue full
+#define PORT5_QUEUE_FULL BIT(19) //port5 queue full
+#define PORT6_QUEUE_FULL BIT(20) //port6 queue full
+#define SHARED_QUEUE_FULL BIT(23) //shared queue full
+#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped
+#define BC_STROM BIT(25) //the device is undergoing broadcast storm
+#define PORT_ST_CHG BIT(26) //Port status change
+#define UNSECURED_ALERT BIT(27) //Intruder alert
+#define ABNORMAL_ALERT BIT(28) //Abnormal
+
+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00)
+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04)
+#define ESW_INT_ALL (PORT_ST_CHG)
+
+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620)
+#define MIB_INT BIT(25)
+#define ACL_INT BIT(24)
+#define P5_LINK_CH BIT(5)
+#define P4_LINK_CH BIT(4)
+#define P3_LINK_CH BIT(3)
+#define P2_LINK_CH BIT(2)
+#define P1_LINK_CH BIT(1)
+#define P0_LINK_CH BIT(0)
+
+#define RX_GOCT_CNT BIT(4)
+#define RX_GOOD_CNT BIT(6)
+#define TX_GOCT_CNT BIT(17)
+#define TX_GOOD_CNT BIT(19)
+
+#define MSK_RX_GOCT_CNT BIT(4)
+#define MSK_RX_GOOD_CNT BIT(6)
+#define MSK_TX_GOCT_CNT BIT(17)
+#define MSK_TX_GOOD_CNT BIT(19)
+#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT)
+//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT)
+
+
+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8)
+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC)
+#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT)
+#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8)
+#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004)
+#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104)
+#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204)
+#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304)
+#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404)
+#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504)
+#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604)
+#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008)
+#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108)
+#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208)
+#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308)
+#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408)
+#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508)
+#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608)
+
+#if defined (CONFIG_RALINK_MT7620)
+#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704)
+#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708)
+#endif
+
+
+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000)
+
+#elif defined (CONFIG_RALINK_MT7621)
+
+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000)
+
+#define P5_LINK_CH BIT(5)
+#define P4_LINK_CH BIT(4)
+#define P3_LINK_CH BIT(3)
+#define P2_LINK_CH BIT(2)
+#define P1_LINK_CH BIT(1)
+#define P0_LINK_CH BIT(0)
+
+
+#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)//
+
+#define RX_BUF_ALLOC_SIZE 2000
+#define FASTPATH_HEADROOM 64
+
+#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line
+
+#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \
+ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \
+ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr))
+
+#ifdef CONFIG_PSEUDO_SUPPORT
+typedef struct _PSEUDO_ADAPTER {
+ struct net_device *RaethDev;
+ struct net_device *PseudoDev;
+ struct net_device_stats stat;
+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
+ struct mii_if_info mii_info;
+#endif
+
+} PSEUDO_ADAPTER, PPSEUDO_ADAPTER;
+
+#define MAX_PSEUDO_ENTRY 1
+#endif
+
+
+
+/* Register Categories Definition */
+#define RAFRAMEENGINE_OFFSET 0x0000
+#define RAGDMA_OFFSET 0x0020
+#define RAPSE_OFFSET 0x0040
+#define RAGDMA2_OFFSET 0x0060
+#define RACDMA_OFFSET 0x0080
+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
+
+#define RAPDMA_OFFSET 0x0800
+#define SDM_OFFSET 0x0C00
+#else
+#define RAPDMA_OFFSET 0x0100
+#endif
+#define RAPPE_OFFSET 0x0200
+#define RACMTABLE_OFFSET 0x0400
+#define RAPOLICYTABLE_OFFSET 0x1000
+
+
+/* Register Map Detail */
+/* RT3883 */
+#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14)
+
+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
+
+/* 1. PDMA */
+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000)
+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004)
+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008)
+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C)
+
+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010)
+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014)
+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018)
+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C)
+
+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020)
+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024)
+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028)
+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C)
+
+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030)
+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034)
+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038)
+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C)
+
+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100)
+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104)
+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108)
+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C)
+
+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110)
+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114)
+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118)
+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C)
+
+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200)
+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204)
+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208)
+#define PDMA_RST_CFG (PDMA_RST_IDX)
+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C)
+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210)
+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220)
+#define FE_INT_STATUS (INT_STATUS)
+#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228)
+#define FE_INT_ENABLE (INT_MASK)
+#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
+#define PDMA_SCH_CFG (PDMA_WRR)
+
+#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration
+#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring
+#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring
+#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB
+#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB
+#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count
+#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count
+#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count
+#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count
+#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count
+
+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
+
+/* Old FE with New PDMA */
+#define PDMA_RELATED 0x0800
+/* 1. PDMA */
+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000)
+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004)
+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008)
+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C)
+
+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010)
+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014)
+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018)
+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C)
+
+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020)
+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024)
+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028)
+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C)
+
+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030)
+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034)
+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038)
+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C)
+
+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100)
+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104)
+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108)
+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C)
+
+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110)
+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114)
+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118)
+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C)
+
+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200)
+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204)
+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208)
+#define PDMA_RST_CFG (PDMA_RST_IDX)
+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C)
+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210)
+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220)
+#define FE_INT_STATUS (INT_STATUS)
+#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228)
+#define FE_INT_ENABLE (INT_MASK)
+#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
+#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284)
+
+#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00
+#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04
+#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08
+#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c
+//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18
+#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10
+
+#if defined (CONFIG_RALINK_MT7620)
+#define GDMA1_RELATED 0x0600
+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
+#elif defined (CONFIG_RALINK_MT7621)
+#define GDMA1_RELATED 0x0500
+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
+
+#define GDMA2_RELATED 0x1500
+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
+#else
+#define GDMA1_RELATED 0x0020
+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10)
+
+#define GDMA2_RELATED 0x0060
+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10)
+#endif
+
+#if defined (CONFIG_RALINK_MT7620)
+#define PSE_RELATED 0x0500
+#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
+#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
+#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
+#else
+#define PSE_RELATED 0x0040
+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C)
+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10)
+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14)
+#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18)
+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C)
+#endif
+
+
+#if defined (CONFIG_RALINK_MT7620)
+#define CDMA_RELATED 0x0400
+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4)
+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8)
+#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0)
+#elif defined (CONFIG_RALINK_MT7621)
+#define CDMA_RELATED 0x0400
+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition
+#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
+#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
+#else
+#define CDMA_RELATED 0x0080
+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4)
+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8)
+#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0)
+#endif
+
+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100)
+
+
+#if defined (CONFIG_RALINK_MT7621)
+/*kurtis: add QDMA define*/
+
+#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C)
+#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58)
+
+#define QDMA_RELATED 0x1800
+#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000)
+#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004)
+#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008)
+#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C)
+#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010)
+#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014)
+#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018)
+#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C)
+#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020)
+#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024)
+#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028)
+#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C)
+#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030)
+#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034)
+#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038)
+#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C)
+#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040)
+#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044)
+#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048)
+#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C)
+#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050)
+#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054)
+#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058)
+#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C)
+#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060)
+#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064)
+#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068)
+#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C)
+#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070)
+#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074)
+#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078)
+#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C)
+#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080)
+#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084)
+#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088)
+#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C)
+#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090)
+#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094)
+#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098)
+#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C)
+#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0)
+#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4)
+#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8)
+#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC)
+#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0)
+#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4)
+#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8)
+#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC)
+#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0)
+#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4)
+#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8)
+#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC)
+#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0)
+#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4)
+#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8)
+#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC)
+#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0)
+#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4)
+#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8)
+#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC)
+#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0)
+#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4)
+#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8)
+#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC)
+#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100)
+#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104)
+#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108)
+#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C)
+#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110)
+#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114)
+#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118)
+#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C)
+#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200)
+#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204)
+#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208)
+#define QDMA_RST_CFG (QDMA_RST_IDX)
+#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C)
+#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210)
+#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214)
+#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218)
+#define QFE_INT_STATUS (QDMA_INT_STS)
+#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C)
+#define QFE_INT_ENABLE (QDMA_INT_MASK)
+#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220)
+#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224)
+#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228)
+#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C)
+#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230)
+#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234)
+#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238)
+#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240)
+#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244)
+#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248)
+#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C)
+#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300)
+#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304)
+#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308)
+#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310)
+#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314)
+#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318)
+#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320)
+#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324)
+#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328)
+#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C)
+#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350)
+#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354)
+#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358)
+#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C)
+#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360)
+#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364)
+#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368)
+#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C)
+
+
+#endif/*MT7621 QDMA*/
+
+#else
+
+/* 1. Frame Engine Global Registers */
+#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00)
+#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04)
+#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08)
+#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C)
+#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10)
+#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14)
+#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA
+#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C)
+
+
+/* 2. GDMA Registers */
+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00)
+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04)
+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08)
+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C)
+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10)
+
+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00)
+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04)
+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08)
+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C)
+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10)
+
+/* 3. PSE */
+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00)
+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04)
+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08)
+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C)
+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0)
+
+/* 4. CDMA */
+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00)
+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04)
+/* skip ppoe sid and vlan id definition */
+
+
+/* 5. PDMA */
+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00)
+#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04)
+#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08)
+
+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C)
+
+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10)
+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14)
+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18)
+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C)
+
+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20)
+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24)
+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28)
+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C)
+
+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
+
+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50)
+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54)
+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58)
+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C)
+
+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30)
+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34)
+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38)
+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C)
+
+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
+
+#endif
+
+#define DELAY_INT_INIT 0x84048404
+#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT)
+
+
+#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
+
+/* 6. Counter and Meter Table */
+#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */
+#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */
+/* 0 ~ 63 */
+
+#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */
+/* skip... */
+#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC)
+
+#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */
+#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */
+#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */
+#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */
+
+/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */
+#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320)
+#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324)
+#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328)
+#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C)
+#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330)
+#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334)
+#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338)
+#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C)
+
+#endif
+
+
+/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */
+#define PORT0_PKCOUNT (0xb01100e8)
+#define PORT1_PKCOUNT (0xb01100ec)
+#define PORT2_PKCOUNT (0xb01100f0)
+#define PORT3_PKCOUNT (0xb01100f4)
+#define PORT4_PKCOUNT (0xb01100f8)
+#define PORT5_PKCOUNT (0xb01100fc)
+
+
+// PHYS_TO_K1
+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
+
+
+#define sysRegRead(phys) \
+ (*(volatile unsigned int *)PHYS_TO_K1(phys))
+
+#define sysRegWrite(phys, val) \
+ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val))
+
+#define u_long unsigned long
+#define u32 unsigned int
+#define u16 unsigned short
+
+
+/* ====================================== */
+#define GDM1_DISPAD BIT(18)
+#define GDM1_DISCRC BIT(17)
+
+//GDMA1 uni-cast frames destination port
+#define GDM1_ICS_EN (0x1 << 22)
+#define GDM1_TCS_EN (0x1 << 21)
+#define GDM1_UCS_EN (0x1 << 20)
+#define GDM1_JMB_EN (0x1 << 19)
+#define GDM1_STRPCRC (0x1 << 16)
+#define GDM1_UFRC_P_CPU (0 << 12)
+#if defined (CONFIG_RALINK_MT7621)
+#define GDM1_UFRC_P_PPE (4 << 12)
+#else
+#define GDM1_UFRC_P_PPE (6 << 12)
+#endif
+
+//GDMA1 broad-cast MAC address frames
+#define GDM1_BFRC_P_CPU (0 << 8)
+#if defined (CONFIG_RALINK_MT7621)
+#define GDM1_BFRC_P_PPE (4 << 8)
+#else
+#define GDM1_BFRC_P_PPE (6 << 8)
+#endif
+
+//GDMA1 multi-cast MAC address frames
+#define GDM1_MFRC_P_CPU (0 << 4)
+#if defined (CONFIG_RALINK_MT7621)
+#define GDM1_MFRC_P_PPE (4 << 4)
+#else
+#define GDM1_MFRC_P_PPE (6 << 4)
+#endif
+
+//GDMA1 other MAC address frames destination port
+#define GDM1_OFRC_P_CPU (0 << 0)
+#if defined (CONFIG_RALINK_MT7621)
+#define GDM1_OFRC_P_PPE (4 << 0)
+#else
+#define GDM1_OFRC_P_PPE (6 << 0)
+#endif
+
+#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
+/* checksum generator registers are removed */
+#define ICS_GEN_EN (0 << 2)
+#define UCS_GEN_EN (0 << 1)
+#define TCS_GEN_EN (0 << 0)
+#else
+#define ICS_GEN_EN (1 << 2)
+#define UCS_GEN_EN (1 << 1)
+#define TCS_GEN_EN (1 << 0)
+#endif
+
+// MDIO_CFG bit
+#define MDIO_CFG_GP1_FC_TX (1 << 11)
+#define MDIO_CFG_GP1_FC_RX (1 << 10)
+
+/* ====================================== */
+/* ====================================== */
+#define GP1_LNK_DWN BIT(9)
+#define GP1_AN_FAIL BIT(8)
+/* ====================================== */
+/* ====================================== */
+#define PSE_RESET BIT(0)
+/* ====================================== */
+#define PST_DRX_IDX1 BIT(17)
+#define PST_DRX_IDX0 BIT(16)
+#define PST_DTX_IDX3 BIT(3)
+#define PST_DTX_IDX2 BIT(2)
+#define PST_DTX_IDX1 BIT(1)
+#define PST_DTX_IDX0 BIT(0)
+
+#define RX_2B_OFFSET BIT(31)
+#define DESC_32B_EN BIT(8)
+#define TX_WB_DDONE BIT(6)
+#define RX_DMA_BUSY BIT(3)
+#define TX_DMA_BUSY BIT(1)
+#define RX_DMA_EN BIT(2)
+#define TX_DMA_EN BIT(0)
+
+#define PDMA_BT_SIZE_4DWORDS (0<<4)
+#define PDMA_BT_SIZE_8DWORDS (1<<4)
+#define PDMA_BT_SIZE_16DWORDS (2<<4)
+#define PDMA_BT_SIZE_32DWORDS (3<<4)
+
+/* Register bits.
+ */
+
+#define MACCFG_RXEN (1<<2)
+#define MACCFG_TXEN (1<<3)
+#define MACCFG_PROMISC (1<<18)
+#define MACCFG_RXMCAST (1<<19)
+#define MACCFG_FDUPLEX (1<<20)
+#define MACCFG_PORTSEL (1<<27)
+#define MACCFG_HBEATDIS (1<<28)
+
+
+#define DMACTL_SR (1<<1) /* Start/Stop Receive */
+#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */
+
+#define DMACFG_SWR (1<<0) /* Software Reset */
+#define DMACFG_BURST32 (32<<8)
+
+#define DMASTAT_TS 0x00700000 /* Transmit Process State */
+#define DMASTAT_RS 0x000e0000 /* Receive Process State */
+
+#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL)
+
+
+
+/* Descriptor bits.
+ */
+#define R_OWN 0x80000000 /* Own Bit */
+#define RD_RER 0x02000000 /* Receive End Of Ring */
+#define RD_LS 0x00000100 /* Last Descriptor */
+#define RD_ES 0x00008000 /* Error Summary */
+#define RD_CHAIN 0x01000000 /* Chained */
+
+/* Word 0 */
+#define T_OWN 0x80000000 /* Own Bit */
+#define TD_ES 0x00008000 /* Error Summary */
+
+/* Word 1 */
+#define TD_LS 0x40000000 /* Last Segment */
+#define TD_FS 0x20000000 /* First Segment */
+#define TD_TER 0x08000000 /* Transmit End Of Ring */
+#define TD_CHAIN 0x01000000 /* Chained */
+
+
+#define TD_SET 0x08000000 /* Setup Packet */
+
+
+#define POLL_DEMAND 1
+
+#define RSTCTL (0x34)
+#define RSTCTL_RSTENET1 (1<<19)
+#define RSTCTL_RSTENET2 (1<<20)
+
+#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000
+#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000
+#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01
+#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01
+
+// Define Whole FE Reset Register
+#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34)
+
+/*=========================================
+ PDMA RX Descriptor Format define
+=========================================*/
+
+//-------------------------------------------------
+typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T;
+
+struct _PDMA_RXD_INFO1_
+{
+ unsigned int PDP0;
+};
+//-------------------------------------------------
+typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T;
+
+struct _PDMA_RXD_INFO2_
+{
+ unsigned int PLEN1 : 14;
+ unsigned int LS1 : 1;
+ unsigned int TAG : 1;
+ unsigned int PLEN0 : 14;
+ unsigned int LS0 : 1;
+ unsigned int DDONE_bit : 1;
+};
+//-------------------------------------------------
+typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T;
+
+struct _PDMA_RXD_INFO3_
+{
+ unsigned int VID:16;
+ unsigned int TPID:16;
+};
+//-------------------------------------------------
+typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T;
+
+struct _PDMA_RXD_INFO4_
+{
+#if defined (CONFIG_RALINK_MT7620)
+ unsigned int FOE_Entry : 14;
+ unsigned int CRSN : 5;
+ unsigned int SPORT : 3;
+ unsigned int L4F : 1;
+ unsigned int L4VLD : 1;
+ unsigned int TACK : 1;
+ unsigned int IP4F : 1;
+ unsigned int IP4 : 1;
+ unsigned int IP6 : 1;
+ unsigned int UN_USE1 : 4;
+#elif defined (CONFIG_RALINK_MT7621)
+ unsigned int FOE_Entry : 14;
+ unsigned int CRSN : 5;
+ unsigned int SP : 4;
+ unsigned int L4F : 1;
+ unsigned int L4VLD : 1;
+ unsigned int TACK : 1;
+ unsigned int IP4F : 1;
+ unsigned int IP4 : 1;
+ unsigned int IP6 : 1;
+ unsigned int UN_USE1 : 3;
+#else
+ unsigned int FOE_Entry : 14;
+ unsigned int FVLD : 1;
+ unsigned int UN_USE1 : 1;
+ unsigned int AI : 8;
+ unsigned int SP : 3;
+ unsigned int AIS : 1;
+ unsigned int L4F : 1;
+ unsigned int IPF : 1;
+ unsigned int L4FVLD_bit : 1;
+ unsigned int IPFVLD_bit : 1;
+#endif
+};
+
+
+struct PDMA_rxdesc {
+ PDMA_RXD_INFO1_T rxd_info1;
+ PDMA_RXD_INFO2_T rxd_info2;
+ PDMA_RXD_INFO3_T rxd_info3;
+ PDMA_RXD_INFO4_T rxd_info4;
+#ifdef CONFIG_32B_DESC
+ unsigned int rxd_info5;
+ unsigned int rxd_info6;
+ unsigned int rxd_info7;
+ unsigned int rxd_info8;
+#endif
+};
+
+/*=========================================
+ PDMA TX Descriptor Format define
+=========================================*/
+//-------------------------------------------------
+typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T;
+
+struct _PDMA_TXD_INFO1_
+{
+ unsigned int SDP0;
+};
+//-------------------------------------------------
+typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T;
+
+struct _PDMA_TXD_INFO2_
+{
+ unsigned int SDL1 : 14;
+ unsigned int LS1_bit : 1;
+ unsigned int BURST_bit : 1;
+ unsigned int SDL0 : 14;
+ unsigned int LS0_bit : 1;
+ unsigned int DDONE_bit : 1;
+};
+//-------------------------------------------------
+typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T;
+
+struct _PDMA_TXD_INFO3_
+{
+ unsigned int SDP1;
+};
+//-------------------------------------------------
+typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T;
+
+struct _PDMA_TXD_INFO4_
+{
+#if defined (CONFIG_RALINK_MT7620)
+ unsigned int VPRI_VIDX : 8;
+ unsigned int SIDX : 4;
+ unsigned int INSP : 1;
+ unsigned int RESV : 2;
+ unsigned int UDF : 5;
+ unsigned int FP_BMAP : 8;
+ unsigned int TSO : 1;
+ unsigned int TUI_CO : 3;
+#elif defined (CONFIG_RALINK_MT7621)
+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
+ unsigned int RESV : 2;
+ unsigned int UDF : 6;
+ unsigned int FPORT : 3;
+ unsigned int TSO : 1;
+ unsigned int TUI_CO : 3;
+#else
+ unsigned int VPRI_VIDX : 8;
+ unsigned int SIDX : 4;
+ unsigned int INSP : 1;
+ unsigned int RESV : 1;
+ unsigned int UN_USE3 : 2;
+ unsigned int QN : 3;
+ unsigned int UN_USE2 : 1;
+ unsigned int UDF : 4;
+ unsigned int PN : 3;
+ unsigned int UN_USE1 : 1;
+ unsigned int TSO : 1;
+ unsigned int TUI_CO : 3;
+#endif
+};
+
+
+struct PDMA_txdesc {
+ PDMA_TXD_INFO1_T txd_info1;
+ PDMA_TXD_INFO2_T txd_info2;
+ PDMA_TXD_INFO3_T txd_info3;
+ PDMA_TXD_INFO4_T txd_info4;
+#ifdef CONFIG_32B_DESC
+ unsigned int txd_info5;
+ unsigned int txd_info6;
+ unsigned int txd_info7;
+ unsigned int txd_info8;
+#endif
+};
+
+
+#if defined (CONFIG_RALINK_MT7621)
+/*=========================================
+ QDMA TX Descriptor Format define
+=========================================*/
+//-------------------------------------------------
+typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T;
+
+struct _QDMA_TXD_INFO1_
+{
+ unsigned int SDP;
+};
+//-------------------------------------------------
+typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T;
+
+struct _QDMA_TXD_INFO2_
+{
+ unsigned int NDP;
+};
+//-------------------------------------------------
+typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T;
+
+struct _QDMA_TXD_INFO3_
+{
+ unsigned int QID : 4;
+ unsigned int RESV : 10;
+ unsigned int SWC_bit : 1;
+ unsigned int BURST_bit : 1;
+ unsigned int SDL : 14;
+ unsigned int LS_bit : 1;
+ unsigned int OWN_bit : 1;
+};
+//-------------------------------------------------
+typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T;
+
+struct _QDMA_TXD_INFO4_
+{
+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
+ unsigned int RESV : 2;
+ unsigned int UDF : 6;
+ unsigned int FPORT : 3;
+ unsigned int TSO : 1;
+ unsigned int TUI_CO : 3;
+};
+
+
+struct QDMA_txdesc {
+ QDMA_TXD_INFO1_T txd_info1;
+ QDMA_TXD_INFO2_T txd_info2;
+ QDMA_TXD_INFO3_T txd_info3;
+ QDMA_TXD_INFO4_T txd_info4;
+#ifdef CONFIG_32B_DESC
+ unsigned int txd_info5;
+ unsigned int txd_info6;
+ unsigned int txd_info7;
+ unsigned int txd_info8;
+#endif
+};
+#endif
+
+#define phys_to_bus(a) (a & 0x1FFFFFFF)
+
+#define PHY_Enable_Auto_Nego 0x1000
+#define PHY_Restart_Auto_Nego 0x0200
+
+/* PHY_STAT_REG = 1; */
+#define PHY_Auto_Neco_Comp 0x0020
+#define PHY_Link_Status 0x0004
+
+/* PHY_AUTO_NEGO_REG = 4; */
+#define PHY_Cap_10_Half 0x0020
+#define PHY_Cap_10_Full 0x0040
+#define PHY_Cap_100_Half 0x0080
+#define PHY_Cap_100_Full 0x0100
+
+/* proc definition */
+
+#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \
+ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621)
+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c)
+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50)
+#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54)
+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58)
+#endif
+
+#define PROCREG_CONTROL_FILE "/var/run/procreg_control"
+#if defined (CONFIG_RALINK_RT2880)
+#define PROCREG_DIR "rt2880"
+#elif defined (CONFIG_RALINK_RT3052)
+#define PROCREG_DIR "rt3052"
+#elif defined (CONFIG_RALINK_RT3352)
+#define PROCREG_DIR "rt3352"
+#elif defined (CONFIG_RALINK_RT5350)
+#define PROCREG_DIR "rt5350"
+#elif defined (CONFIG_RALINK_RT2883)
+#define PROCREG_DIR "rt2883"
+#elif defined (CONFIG_RALINK_RT3883)
+#define PROCREG_DIR "rt3883"
+#elif defined (CONFIG_RALINK_RT6855)
+#define PROCREG_DIR "rt6855"
+#elif defined (CONFIG_RALINK_MT7620)
+#define PROCREG_DIR "mt7620"
+#elif defined (CONFIG_RALINK_MT7621)
+#define PROCREG_DIR "mt7621"
+#elif defined (CONFIG_RALINK_MT7628)
+#define PROCREG_DIR "mt7628"
+#elif defined (CONFIG_RALINK_RT6855A)
+#define PROCREG_DIR "rt6855a"
+#else
+#define PROCREG_DIR "rt2880"
+#endif
+#define PROCREG_SKBFREE "skb_free"
+#define PROCREG_TXRING "tx_ring"
+#define PROCREG_RXRING "rx_ring"
+#define PROCREG_NUM_OF_TXD "num_of_txd"
+#define PROCREG_TSO_LEN "tso_len"
+#define PROCREG_LRO_STATS "lro_stats"
+#define PROCREG_GMAC "gmac"
+#define PROCREG_GMAC2 "gmac2"
+#define PROCREG_CP0 "cp0"
+#define PROCREG_RAQOS "qos"
+#define PROCREG_READ_VAL "regread_value"
+#define PROCREG_WRITE_VAL "regwrite_value"
+#define PROCREG_ADDR "reg_addr"
+#define PROCREG_CTL "procreg_control"
+#define PROCREG_RXDONE_INTR "rxdone_intr_count"
+#define PROCREG_ESW_INTR "esw_intr_count"
+#define PROCREG_ESW_CNT "esw_cnt"
+#define PROCREG_SNMP "snmp"
+#if defined (TASKLET_WORKQUEUE_SW)
+#define PROCREG_SCHE "schedule"
+#endif
+#define PROCREG_QDMA "qdma"
+
+struct rt2880_reg_op_data {
+ char name[64];
+ unsigned int reg_addr;
+ unsigned int op;
+ unsigned int reg_value;
+};
+
+#ifdef CONFIG_RAETH_LRO
+struct lro_counters {
+ u32 lro_aggregated;
+ u32 lro_flushed;
+ u32 lro_no_desc;
+};
+
+struct lro_para_struct {
+ unsigned int lan_ip1;
+};
+
+#endif // CONFIG_RAETH_LRO //
+
+
+
+
+typedef struct end_device
+{
+
+ unsigned int tx_cpu_owner_idx0;
+ unsigned int rx_cpu_owner_idx0;
+ unsigned int fe_int_status;
+ unsigned int tx_full;
+
+#if !defined (CONFIG_RAETH_QDMA)
+ unsigned int phy_tx_ring0;
+#else
+ /* QDMA Tx PTR */
+ struct sk_buff *free_skb[NUM_TX_DESC];
+ unsigned int tx_dma_ptr;
+ unsigned int tx_cpu_ptr;
+ unsigned int free_txd_num;
+ unsigned int free_txd_head;
+ unsigned int free_txd_tail;
+ struct QDMA_txdesc *txd_pool;
+ dma_addr_t phy_txd_pool;
+// unsigned int phy_txd_pool;
+ unsigned int txd_pool_info[NUM_TX_DESC];
+#endif
+
+ unsigned int phy_rx_ring0, phy_rx_ring1;
+
+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \
+ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \
+ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \
+ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
+ //send signal to user application to notify link status changed
+ struct work_struct kill_sig_wq;
+#endif
+
+ struct work_struct reset_task;
+#ifdef WORKQUEUE_BH
+ struct work_struct rx_wq;
+#else
+#if defined (TASKLET_WORKQUEUE_SW)
+ struct work_struct rx_wq;
+#endif
+#endif // WORKQUEUE_BH //
+
+#if defined(CONFIG_RAETH_QOS)
+ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC];
+ unsigned int free_idx[NUM_TX_RINGS];
+#else
+ struct sk_buff* skb_free[NUM_TX_DESC];
+ unsigned int free_idx;
+#endif
+
+ struct net_device_stats stat; /* The new statistics table. */
+ spinlock_t page_lock; /* Page register locks */
+ struct PDMA_txdesc *tx_ring0;
+#if defined(CONFIG_RAETH_QOS)
+ struct PDMA_txdesc *tx_ring1;
+ struct PDMA_txdesc *tx_ring2;
+ struct PDMA_txdesc *tx_ring3;
+#endif
+ struct PDMA_rxdesc *rx_ring0;
+ struct sk_buff *netrx0_skbuf[NUM_RX_DESC];
+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
+ struct PDMA_rxdesc *rx_ring1;
+ struct sk_buff *netrx1_skbuf[NUM_RX_DESC];
+#endif
+#ifdef CONFIG_RAETH_NAPI
+ atomic_t irq_sem;
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
+ struct napi_struct napi;
+#endif
+#endif
+#ifdef CONFIG_PSEUDO_SUPPORT
+ struct net_device *PseudoDev;
+ unsigned int isPseudo;
+#endif
+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
+ struct mii_if_info mii_info;
+#endif
+#ifdef CONFIG_RAETH_LRO
+ struct lro_counters lro_counters;
+ struct net_lro_mgr lro_mgr;
+ struct net_lro_desc lro_arr[8];
+#endif
+#ifdef CONFIG_RAETH_HW_VLAN_RX
+ struct vlan_group *vlgrp;
+#endif
+} END_DEVICE, *pEND_DEVICE;
+
+
+#define RAETH_VERSION "v3.0"
+
+#endif
+
+#ifdef CONFIG_RAETH_QDMA
+#define DMA_GLO_CFG QDMA_GLO_CFG
+#define GDMA1_FWD_PORT 0x5555
+#define GDMA2_FWD_PORT 0x5555
+#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0
+#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1
+#define RAETH_FE_INT_STATUS QFE_INT_STATUS
+#define RAETH_FE_INT_ALL QFE_INT_ALL
+#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE
+#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT
+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT
+#define RAETH_TX_DLY_INT RLS_DLY_INT
+#define RAETH_TX_DONE_INT0 RLS_DONE_INT
+#define RAETH_DLY_INT_CFG QDMA_DELAY_INT
+#else
+#define DMA_GLO_CFG PDMA_GLO_CFG
+#define GDMA1_FWD_PORT 0x0000
+#define GDMA2_FWD_PORT 0x0000
+#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0
+#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1
+#define RAETH_FE_INT_STATUS FE_INT_STATUS
+#define RAETH_FE_INT_ALL FE_INT_ALL
+#define RAETH_FE_INT_ENABLE FE_INT_ENABLE
+#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT
+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3
+#define RAETH_TX_DLY_INT TX_DLY_INT
+#define RAETH_TX_DONE_INT0 TX_DONE_INT0
+#define RAETH_DLY_INT_CFG DLY_INT_CFG
+#endif
Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_ioctl.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_ioctl.h 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,92 @@
+#ifndef _RAETH_IOCTL_H
+#define _RAETH_IOCTL_H
+
+/* ioctl commands */
+#define RAETH_ESW_REG_READ 0x89F1
+#define RAETH_ESW_REG_WRITE 0x89F2
+#define RAETH_MII_READ 0x89F3
+#define RAETH_MII_WRITE 0x89F4
+#define RAETH_ESW_INGRESS_RATE 0x89F5
+#define RAETH_ESW_EGRESS_RATE 0x89F6
+#define RAETH_ESW_PHY_DUMP 0x89F7
+#define RAETH_QDMA_REG_READ 0x89F8
+#define RAETH_QDMA_REG_WRITE 0x89F9
+#define RAETH_QDMA_QUEUE_MAPPING 0x89FA
+#define RAETH_QDMA_READ_CPU_CLK 0x89FB
+
+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
+
+#define REG_ESW_WT_MAC_MFC 0x10
+#define REG_ESW_WT_MAC_ATA1 0x74
+#define REG_ESW_WT_MAC_ATA2 0x78
+#define REG_ESW_WT_MAC_ATWD 0x7C
+#define REG_ESW_WT_MAC_ATC 0x80
+
+#define REG_ESW_TABLE_TSRA1 0x84
+#define REG_ESW_TABLE_TSRA2 0x88
+#define REG_ESW_TABLE_ATRD 0x8C
+
+
+#define REG_ESW_VLAN_VTCR 0x90
+#define REG_ESW_VLAN_VAWD1 0x94
+#define REG_ESW_VLAN_VAWD2 0x98
+
+
+#define REG_ESW_VLAN_ID_BASE 0x100
+
+//#define REG_ESW_VLAN_ID_BASE 0x50
+#define REG_ESW_VLAN_MEMB_BASE 0x70
+#define REG_ESW_TABLE_SEARCH 0x24
+#define REG_ESW_TABLE_STATUS0 0x28
+#define REG_ESW_TABLE_STATUS1 0x2C
+#define REG_ESW_TABLE_STATUS2 0x30
+#define REG_ESW_WT_MAC_AD0 0x34
+#define REG_ESW_WT_MAC_AD1 0x38
+#define REG_ESW_WT_MAC_AD2 0x3C
+
+#else
+/* rt3052 embedded ethernet switch registers */
+#define REG_ESW_VLAN_ID_BASE 0x50
+#define REG_ESW_VLAN_MEMB_BASE 0x70
+#define REG_ESW_TABLE_SEARCH 0x24
+#define REG_ESW_TABLE_STATUS0 0x28
+#define REG_ESW_TABLE_STATUS1 0x2C
+#define REG_ESW_TABLE_STATUS2 0x30
+#define REG_ESW_WT_MAC_AD0 0x34
+#define REG_ESW_WT_MAC_AD1 0x38
+#define REG_ESW_WT_MAC_AD2 0x3C
+#endif
+
+
+#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
+#define REG_ESW_MAX 0x16C
+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620)
+#define REG_ESW_MAX 0x7FFFF
+#else //RT305x, RT3350
+#define REG_ESW_MAX 0xFC
+#endif
+#define REG_HQOS_MAX 0x3FFF
+
+
+typedef struct rt3052_esw_reg {
+ unsigned int off;
+ unsigned int val;
+} esw_reg;
+
+typedef struct ralink_mii_ioctl_data {
+ __u32 phy_id;
+ __u32 reg_num;
+ __u32 val_in;
+ __u32 val_out;
+} ra_mii_ioctl_data;
+
+typedef struct rt335x_esw_reg {
+ unsigned int on_off;
+ unsigned int port;
+ unsigned int bw;/*Mbps*/
+} esw_rate;
+
+
+#endif
Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.c 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,98 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+#include <linux/ctype.h>
+
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+//#include <linux/mca.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_USER_SNMPD)
+#include <linux/seq_file.h>
+#endif
+
+
+
+#include "ra2882ethreg.h"
+#include "raether.h"
+#include "ra_mac.h"
+
+extern struct net_device *dev_raether;
+
+
+void ra2880stop(END_DEVICE *ei_local)
+{
+ unsigned int regValue;
+ printk("ra2880stop()...");
+
+ regValue = sysRegRead(PDMA_GLO_CFG);
+ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
+ sysRegWrite(PDMA_GLO_CFG, regValue);
+ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue);
+ printk("Done\n");
+}
+
+void ei_irq_clear(void)
+{
+ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF);
+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF);
+}
+
+void rt2880_gmac_hard_reset(void)
+{
+ sysRegWrite(RSTCTRL, RALINK_FE_RST);
+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST);
+ sysRegWrite(RSTCTRL, 0);
+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0);
+}
+
+void ra2880EnableInterrupt()
+{
+ unsigned int regValue = sysRegRead(FE_INT_ENABLE);
+ sysRegWrite(FE_INT_ENABLE, regValue);
+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue);
+}
+
+void ra2880MacAddressSet(unsigned char p[6])
+{
+ unsigned long regValue;
+
+ regValue = (p[0] << 8) | (p[1]);
+ sysRegWrite(GDMA1_MAC_ADRH, regValue);
+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue);
+
+ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5];
+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue);
+ sysRegWrite(GDMA1_MAC_ADRL, regValue);
+
+ return;
+}
+
+
Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.h 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,35 @@
+#ifndef RA_MAC_H
+#define RA_MAC_H
+
+void ra2880stop(END_DEVICE *ei_local);
+void ra2880MacAddressSet(unsigned char p[6]);
+void ra2880Mac2AddressSet(unsigned char p[6]);
+void ethtool_init(struct net_device *dev);
+
+void ra2880EnableInterrupt(void);
+
+void dump_qos(void);
+void dump_reg(void);
+void dump_cp0(void);
+
+int debug_proc_init(void);
+void debug_proc_exit(void);
+
+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
+void enable_auto_negotiate(int unused);
+#else
+void enable_auto_negotiate(int ge);
+#endif
+
+void rt2880_gmac_hard_reset(void);
+
+int TsoLenUpdate(int tso_len);
+int NumOfTxdUpdate(int num_of_txd);
+
+#ifdef CONFIG_RAETH_LRO
+int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed);
+#endif
+int getnext(const char *src, int separator, char *dest);
+int str_to_ip(unsigned int *ip, const char *str);
+#endif
Index: linux-3.14.16/drivers/net/ethernet/raeth/raether.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/raether.c 2014-08-24 16:00:48.998667292 +0200
@@ -0,0 +1,692 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
+#include <linux/if_ether.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include <asm/rt2880/rt_mmap.h>
+#include "ra2882ethreg.h"
+#include "raether.h"
+#include "ra_mac.h"
+#include "ra_ioctl.h"
+
+static int rt2880_eth_recv(struct net_device* dev);
+int reg_dbg = 0;
+
+void setup_internal_gsw(void);
+
+#define MAX_RX_LENGTH 1536
+
+struct net_device *dev_raether;
+
+static int rx_dma_owner_idx;
+static int rx_dma_owner_idx0;
+static int pending_recv;
+static struct PDMA_rxdesc *rx_ring;
+static unsigned long tx_ring_full=0;
+
+#define KSEG1 0xa0000000
+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
+
+extern int fe_dma_init(struct net_device *dev);
+extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no);
+extern void ei_xmit_housekeeping(unsigned long unused);
+extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no);
+
+static int ei_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ if(netif_running(dev))
+ return -EBUSY;
+
+ ra2880MacAddressSet(addr->sa_data);
+ return 0;
+}
+
+
+void set_fe_dma_glo_cfg(void)
+{
+ int dma_glo_cfg=0;
+
+ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS);
+
+ dma_glo_cfg |= (RX_2B_OFFSET);
+
+ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg);
+}
+
+int forward_config(struct net_device *dev)
+{
+ unsigned int regVal, regCsg;
+
+ regVal = sysRegRead(GDMA1_FWD_CFG);
+ regCsg = sysRegRead(CDMA_CSG_CFG);
+
+ //set unicast/multicast/broadcast frame to cpu
+ regVal &= ~0xFFFF;
+ regVal |= GDMA1_FWD_PORT;
+ regCsg &= ~0x7;
+
+ //disable ipv4 header checksum check
+ regVal &= ~GDM1_ICS_EN;
+ regCsg &= ~ICS_GEN_EN;
+
+ //disable tcp checksum check
+ regVal &= ~GDM1_TCS_EN;
+ regCsg &= ~TCS_GEN_EN;
+
+ //disable udp checksum check
+ regVal &= ~GDM1_UCS_EN;
+ regCsg &= ~UCS_GEN_EN;
+
+
+ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */
+
+
+ sysRegWrite(GDMA1_FWD_CFG, regVal);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal);
+ sysRegWrite(CDMA_CSG_CFG, regCsg);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg);
+
+ regVal = 0x1;
+ sysRegWrite(FE_RST_GL, regVal);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal);
+ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1);
+
+ regCsg = sysRegRead(CDMA_CSG_CFG);
+ printk("CDMA_CSG_CFG = %0X\n",regCsg);
+ regVal = sysRegRead(GDMA1_FWD_CFG);
+ printk("GDMA1_FWD_CFG = %0X\n",regVal);
+
+ return 1;
+}
+
+
+static int rt2880_eth_recv(struct net_device* dev)
+{
+ struct sk_buff *skb, *rx_skb;
+ unsigned int length = 0;
+ unsigned long RxProcessed;
+
+
+ int bReschedule = 0;
+ END_DEVICE* ei_local = netdev_priv(dev);
+
+
+
+ RxProcessed = 0;
+
+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
+
+ for ( ; ; ) {
+
+ if (RxProcessed++ > NUM_RX_MAX_PROCESS)
+ {
+ // need to reschedule rx handle
+ bReschedule = 1;
+ break;
+ }
+
+
+
+ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) {
+ rx_ring = ei_local->rx_ring0;
+ rx_dma_owner_idx = rx_dma_owner_idx0;
+ } else {
+ break;
+ }
+
+ /* skb processing */
+ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0;
+ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx];
+ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data;
+ rx_skb->len = length;
+
+ rx_skb->data += NET_IP_ALIGN;
+
+ rx_skb->tail = rx_skb->data + length;
+
+ rx_skb->dev = dev;
+ rx_skb->protocol = eth_type_trans(rx_skb,dev);
+
+ rx_skb->ip_summed = CHECKSUM_NONE;
+
+
+ /* We have to check the free memory size is big enough
+ * before pass the packet to cpu*/
+ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC);
+
+ if (unlikely(skb == NULL))
+ {
+ printk(KERN_ERR "skb not available...\n");
+ ei_local->stat.rx_dropped++;
+ bReschedule = 1;
+ break;
+ }
+
+ {
+ netif_rx(rx_skb);
+ }
+
+ {
+ ei_local->stat.rx_packets++;
+ ei_local->stat.rx_bytes += length;
+ }
+
+
+ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH;
+ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0;
+ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0;
+ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
+
+ /* Move point to next RXD which wants to alloc*/
+ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
+ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb;
+
+ /* Update to Next packet point that was received.
+ */
+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
+ } /* for */
+
+ return bReschedule;
+}
+
+void ei_receive_workq(struct work_struct *work)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ unsigned long reg_int_mask=0;
+ int bReschedule=0;
+
+
+ if(tx_ring_full==0){
+ bReschedule = rt2880_eth_recv(dev);
+ if(bReschedule)
+ {
+ schedule_work(&ei_local->rx_wq);
+ }else{
+ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE);
+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
+ }
+ }else{
+ schedule_work(&ei_local->rx_wq);
+ }
+}
+
+
+static irqreturn_t ei_interrupt(int irq, void *dev_id)
+{
+ unsigned long reg_int_val;
+ unsigned long reg_int_mask=0;
+ unsigned int recv = 0;
+ unsigned int transmit __maybe_unused = 0;
+ unsigned long flags;
+
+ struct net_device *dev = (struct net_device *) dev_id;
+ END_DEVICE *ei_local = netdev_priv(dev);
+
+ if (dev == NULL)
+ {
+ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0);
+ return IRQ_NONE;
+ }
+
+
+ spin_lock_irqsave(&(ei_local->page_lock), flags);
+ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS);
+
+ if((reg_int_val & RX_DLY_INT))
+ recv = 1;
+
+ if (reg_int_val & RAETH_TX_DLY_INT)
+ transmit = 1;
+
+ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
+
+ ei_xmit_housekeeping(0);
+
+ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0))
+ {
+ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE);
+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
+ pending_recv=0;
+ schedule_work(&ei_local->rx_wq);
+ }
+ else if (recv == 1 && tx_ring_full==1)
+ {
+ pending_recv=1;
+ }
+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
+
+ return IRQ_HANDLED;
+}
+
+static void esw_link_status_changed(int port_no, void *dev_id)
+{
+ unsigned int reg_val;
+ mii_mgr_read(31, (0x3008 + (port_no*0x100)), &reg_val);
+ if(reg_val & 0x1) {
+ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no);
+ } else {
+ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no);
+ }
+}
+
+
+static irqreturn_t esw_interrupt(int irq, void *dev_id)
+{
+ unsigned long flags;
+ unsigned int reg_int_val;
+ struct net_device *dev = (struct net_device *) dev_id;
+ END_DEVICE *ei_local = netdev_priv(dev);
+
+ spin_lock_irqsave(&(ei_local->page_lock), flags);
+ mii_mgr_read(31, 0x700c, &reg_int_val);
+
+ if (reg_int_val & P4_LINK_CH) {
+ esw_link_status_changed(4, dev_id);
+ }
+
+ if (reg_int_val & P3_LINK_CH) {
+ esw_link_status_changed(3, dev_id);
+ }
+ if (reg_int_val & P2_LINK_CH) {
+ esw_link_status_changed(2, dev_id);
+ }
+ if (reg_int_val & P1_LINK_CH) {
+ esw_link_status_changed(1, dev_id);
+ }
+ if (reg_int_val & P0_LINK_CH) {
+ esw_link_status_changed(0, dev_id);
+ }
+
+ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change
+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
+ return IRQ_HANDLED;
+}
+
+
+
+static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev)
+{
+ return ei_start_xmit(skb, dev, 1);
+}
+
+static int ei_change_mtu(struct net_device *dev, int new_mtu)
+{
+ unsigned long flags;
+ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure
+
+ if ( ei_local == NULL ) {
+ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name);
+ return -ENXIO;
+ }
+
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+
+ if ( (new_mtu > 4096) || (new_mtu < 64)) {
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return -EINVAL;
+ }
+
+ if ( new_mtu > 1500 ) {
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return -EINVAL;
+ }
+
+ dev->mtu = new_mtu;
+
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+}
+
+
+static const struct net_device_ops ei_netdev_ops = {
+ .ndo_init = rather_probe,
+ .ndo_open = ei_open,
+ .ndo_stop = ei_close,
+ .ndo_start_xmit = ei_start_xmit_fake,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = ei_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+void ra2880_setup_dev_fptable(struct net_device *dev)
+{
+ RAETH_PRINT(__FUNCTION__ "is called!\n");
+
+ dev->netdev_ops = &ei_netdev_ops;
+#define TX_TIMEOUT (5*HZ)
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+}
+
+void fe_reset(void)
+{
+ u32 val;
+ val = sysRegRead(RSTCTRL);
+
+ val = val | RALINK_FE_RST;
+ sysRegWrite(RSTCTRL, val);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
+ val = val & ~(RALINK_FE_RST);
+ sysRegWrite(RSTCTRL, val);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
+}
+
+void ei_reset_task(struct work_struct *work)
+{
+ struct net_device *dev = dev_raether;
+
+ ei_close(dev);
+ ei_open(dev);
+
+ return;
+}
+
+void ei_tx_timeout(struct net_device *dev)
+{
+ END_DEVICE *ei_local = netdev_priv(dev);
+
+ schedule_work(&ei_local->reset_task);
+}
+
+int __init rather_probe(struct net_device *dev)
+{
+ END_DEVICE *ei_local = netdev_priv(dev);
+ struct sockaddr addr;
+ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80};
+
+ fe_reset();
+ memcpy(addr.sa_data, mac_addr01234, 5);
+ addr.sa_data[5] = prandom_u32()&0xFF;
+ ei_set_mac_addr(dev, &addr);
+ spin_lock_init(&ei_local->page_lock);
+ ether_setup(dev);
+
+ return 0;
+}
+
+
+int ei_open(struct net_device *dev)
+{
+ int i, err;
+ unsigned long flags;
+ END_DEVICE *ei_local;
+
+
+ if (!try_module_get(THIS_MODULE))
+ {
+ printk("%s: Cannot reserve module\n", __FUNCTION__);
+ return -1;
+ }
+ printk("Raeth %s (",RAETH_VERSION);
+ printk("Workqueue");
+
+ printk(")\n");
+ ei_local = netdev_priv(dev); // get device pointer from System
+ // unsigned int flags;
+
+ if (ei_local == NULL)
+ {
+ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
+ return -ENXIO;
+ }
+
+ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */
+ for ( i = 0; i < NUM_RX_DESC; i++)
+ {
+ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN);
+ if (ei_local->netrx0_skbuf[i] == NULL ) {
+ printk("rx skbuff buffer allocation failed!");
+ } else {
+ }
+ }
+
+ spin_lock_irqsave(&(ei_local->page_lock), flags);
+ fe_dma_init(dev);
+ fe_sw_init(); //initialize fe and switch register
+ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open
+ if (err)
+ return err;
+
+ if ( dev->dev_addr != NULL) {
+ ra2880MacAddressSet((void *)(dev->dev_addr));
+ } else {
+ printk("dev->dev_addr is empty !\n");
+ }
+ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr
+ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev);
+ if (err)
+ return err;
+
+ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT);
+ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
+
+ INIT_WORK(&ei_local->reset_task, ei_reset_task);
+
+ INIT_WORK(&ei_local->rx_wq, ei_receive_workq);
+
+ netif_start_queue(dev);
+
+
+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
+
+
+ forward_config(dev);
+ return 0;
+}
+
+int ei_close(struct net_device *dev)
+{
+ int i;
+ END_DEVICE *ei_local = netdev_priv(dev); // device pointer
+ unsigned long flags;
+ spin_lock_irqsave(&(ei_local->page_lock), flags);
+
+ cancel_work_sync(&ei_local->reset_task);
+ netif_stop_queue(dev);
+ ra2880stop(ei_local);
+ msleep(10);
+
+ cancel_work_sync(&ei_local->rx_wq);
+ free_irq(dev->irq, dev);
+ free_irq(31, dev);
+ for ( i = 0; i < NUM_RX_DESC; i++)
+ {
+ if (ei_local->netrx0_skbuf[i] != NULL) {
+ dev_kfree_skb(ei_local->netrx0_skbuf[i]);
+ ei_local->netrx0_skbuf[i] = NULL;
+ }
+ }
+ if (ei_local->tx_ring0 != NULL) {
+ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0);
+ }
+ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0);
+
+ printk("Free TX/RX Ring Memory!\n");
+
+// fe_reset();
+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
+
+ module_put(THIS_MODULE);
+ return 0;
+}
+
+
+void setup_internal_gsw(void)
+{
+ u32 i;
+ u32 regValue;
+
+ /* reduce RGMII2 PAD driving strength */
+ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4);
+
+ //RGMII1=Normal mode
+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14);
+
+ //GMAC1= RGMII mode
+ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12);
+
+ //enable MDIO to control MT7530
+ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60));
+ regValue &= ~(0x3 << 12);
+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue;
+
+ for(i=0;i<=4;i++)
+ {
+ //turn off PHY
+ mii_mgr_read(i, 0x0 ,&regValue);
+ regValue |= (0x1<<11);
+ mii_mgr_write(i, 0x0, regValue);
+ }
+ mii_mgr_write(31, 0x7000, 0x3); //reset switch
+ udelay(10);
+
+ if(sysRegRead(0xbe00000c)==0x00030101) {
+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON)
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b);
+ mii_mgr_write(31, 0x3600, 0x5e30b);
+ } else {
+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON)
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b);
+ mii_mgr_write(31, 0x3600, 0x5e33b);
+ }
+
+ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down)
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000);
+
+ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/
+ mii_mgr_read(31, 0x7804 ,&regValue);
+ regValue &= ~(1<<8); //Enable Port 6
+ regValue |= (1<<6); //Disable Port 5
+ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY
+
+ regValue |= (1<<16);//change HW-TRAP
+ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue);
+ mii_mgr_write(31, 0x7804 ,regValue);
+ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10);
+ regValue = (regValue >> 6) & 0x7;
+ if(regValue >= 6) { //25Mhz Xtal
+ /* do nothing */
+ } else if(regValue >=3) { //40Mhz
+
+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock
+ mii_mgr_write(0, 14, 0x410);
+ mii_mgr_write(0, 13, 0x401f);
+ mii_mgr_write(0, 14, 0x0);
+
+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL
+ mii_mgr_write(0, 14, 0x40d);
+ mii_mgr_write(0, 13, 0x401f);
+ mii_mgr_write(0, 14, 0x2020);
+
+ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz
+ mii_mgr_write(0, 14, 0x40e);
+ mii_mgr_write(0, 13, 0x401f);
+ mii_mgr_write(0, 14, 0x119);
+
+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL
+ mii_mgr_write(0, 14, 0x40d);
+ mii_mgr_write(0, 13, 0x401f);
+ mii_mgr_write(0, 14, 0x2820);
+
+ udelay(20); //suggest by CD
+
+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock
+ mii_mgr_write(0, 14, 0x410);
+ mii_mgr_write(0, 13, 0x401f);
+ }else { //20Mhz Xtal
+
+ /* TODO */
+
+ }
+ mii_mgr_write(0, 14, 0x1); /*RGMII*/
+
+#if 1
+ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M
+ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M
+#else
+ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M
+ mii_mgr_write(31, 0x7b04, 0x14); // for 100M
+#endif
+ /*Tx Driving*/
+ mii_mgr_write(31, 0x7a54, 0x44); //lower driving
+ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving
+ mii_mgr_write(31, 0x7a64, 0x44); //lower driving
+ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving
+ mii_mgr_write(31, 0x7a74, 0x44); //lower driving
+ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving
+
+ for(i=0;i<=4;i++)
+ {
+ //turn on PHY
+ mii_mgr_read(i, 0x0 ,&regValue);
+ regValue &= ~(0x1<<11);
+ mii_mgr_write(i, 0x0, regValue);
+ }
+
+ mii_mgr_read(31, 0x7808 ,&regValue);
+ regValue |= (3<<16); //Enable INTR
+ mii_mgr_write(31, 0x7808 ,regValue);
+}
+
+int __init ra2882eth_init(void)
+{
+ int ret;
+ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE));
+ if (!dev)
+ return -ENOMEM;
+
+ strcpy(dev->name, DEV_NAME);
+ dev->irq = IRQ_ENET0;
+ dev->addr_len = 6;
+ dev->base_addr = RALINK_FRAME_ENGINE_BASE;
+
+ rather_probe(dev);
+ ra2880_setup_dev_fptable(dev);
+
+ if ( register_netdev(dev) != 0) {
+ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n");
+ return -ENXIO;
+ }
+ ret = 0;
+
+ dev_raether = dev;
+ return ret;
+}
+
+void fe_sw_init(void)
+{
+ setup_internal_gsw();
+}
+
+
+void ra2882eth_cleanup_module(void)
+{
+}
+EXPORT_SYMBOL(set_fe_dma_glo_cfg);
+module_init(ra2882eth_init);
+module_exit(ra2882eth_cleanup_module);
+MODULE_LICENSE("GPL");
Index: linux-3.14.16/drivers/net/ethernet/raeth/raether.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/raether.h 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,92 @@
+#ifndef RA2882ETHEND_H
+#define RA2882ETHEND_H
+
+#ifdef DSP_VIA_NONCACHEABLE
+#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */
+#else
+#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */
+#endif
+
+#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000))
+#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800))
+
+#if defined(CONFIG_RALINK_RT2880)
+#define NUM_TX_RINGS 1
+#else
+#define NUM_TX_RINGS 4
+#endif
+#ifdef MEMORY_OPTIMIZATION
+#ifdef CONFIG_RAETH_ROUTER
+#define NUM_RX_DESC 128
+#define NUM_TX_DESC 128
+#elif CONFIG_RT_3052_ESW
+#define NUM_RX_DESC 64
+#define NUM_TX_DESC 64
+#else
+#define NUM_RX_DESC 128
+#define NUM_TX_DESC 128
+#endif
+//#define NUM_RX_MAX_PROCESS 32
+#define NUM_RX_MAX_PROCESS 64
+#else
+#if defined (CONFIG_RAETH_ROUTER)
+#define NUM_RX_DESC 256
+#define NUM_TX_DESC 256
+#elif defined (CONFIG_RT_3052_ESW)
+#define NUM_RX_DESC 256
+#define NUM_TX_DESC 256
+#else
+#define NUM_RX_DESC 256
+#define NUM_TX_DESC 256
+#endif
+#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620)
+#define NUM_RX_MAX_PROCESS 2
+#else
+#define NUM_RX_MAX_PROCESS 16
+#endif
+#endif
+
+#define DEV_NAME "eth0"
+#define DEV2_NAME "eth3"
+
+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621)
+#define GMAC0_OFFSET 0xE000
+#define GMAC2_OFFSET 0xE006
+#else
+#define GMAC0_OFFSET 0x28
+#define GMAC2_OFFSET 0x22
+#endif
+
+#if defined(CONFIG_RALINK_RT6855A)
+#define IRQ_ENET0 22
+#else
+#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */
+#endif
+
+#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS))
+#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg
+
+//#define RAETH_DEBUG
+#ifdef RAETH_DEBUG
+#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args)
+#else
+#define RAETH_PRINT(fmt, args...) { }
+#endif
+
+struct net_device_stats *ra_get_stats(struct net_device *dev);
+
+void ei_tx_timeout(struct net_device *dev);
+int rather_probe(struct net_device *dev);
+int ei_open(struct net_device *dev);
+int ei_close(struct net_device *dev);
+
+int ra2882eth_init(void);
+void ra2882eth_cleanup_module(void);
+
+void ei_xmit_housekeeping(unsigned long data);
+
+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data);
+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data);
+void fe_sw_init(void);
+
+#endif
Index: linux-3.14.16/drivers/net/ethernet/raeth/raether_pdma.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/raether_pdma.c 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,212 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
+#include <linux/if_ether.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/rt2880/rt_mmap.h>
+#include "ra2882ethreg.h"
+#include "raether.h"
+#include "ra_mac.h"
+
+#define MAX_RX_LENGTH 1536
+
+extern int reg_dbg;
+extern struct net_device *dev_raether;
+static unsigned long tx_ring_full=0;
+
+#define KSEG1 0xa0000000
+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
+
+extern void set_fe_dma_glo_cfg(void);
+
+int fe_dma_init(struct net_device *dev)
+{
+
+ int i;
+ unsigned int regVal;
+ END_DEVICE* ei_local = netdev_priv(dev);
+
+ while(1)
+ {
+ regVal = sysRegRead(PDMA_GLO_CFG);
+ if((regVal & RX_DMA_BUSY))
+ {
+ printk("\n RX_DMA_BUSY !!! ");
+ continue;
+ }
+ if((regVal & TX_DMA_BUSY))
+ {
+ printk("\n TX_DMA_BUSY !!! ");
+ continue;
+ }
+ break;
+ }
+
+ for (i=0;i<NUM_TX_DESC;i++){
+ ei_local->skb_free[i]=0;
+ }
+ ei_local->free_idx =0;
+ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0);
+ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0);
+
+ for (i=0; i < NUM_TX_DESC; i++) {
+ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc));
+ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1;
+ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1;
+
+ }
+
+ /* Initial RX Ring 0*/
+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
+ }
+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
+
+
+ regVal = sysRegRead(PDMA_GLO_CFG);
+ regVal &= 0x000000FF;
+ sysRegWrite(PDMA_GLO_CFG, regVal);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal);
+
+ regVal=sysRegRead(PDMA_GLO_CFG);
+
+ /* Tell the adapter where the TX/RX rings are located. */
+ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
+ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
+ sysRegWrite(TX_CTX_IDX0, 0);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0);
+ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0);
+
+ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
+ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
+ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
+ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0);
+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0);
+
+ set_fe_dma_glo_cfg();
+
+ return 1;
+}
+
+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
+{
+ unsigned int length=skb->len;
+ END_DEVICE* ei_local = netdev_priv(dev);
+ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0);
+
+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
+ {
+ ei_local->stat.tx_errors++;
+ }
+
+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data);
+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length;
+ if (gmac_no == 1) {
+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1;
+ }else {
+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2;
+ }
+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0;
+ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC;
+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
+ {
+ ei_local->stat.tx_errors++;
+ }
+ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0));
+
+ {
+ ei_local->stat.tx_packets++;
+ ei_local->stat.tx_bytes += length;
+ }
+
+ return length;
+}
+
+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
+{
+ END_DEVICE *ei_local = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long tx_cpu_owner_idx;
+ unsigned int tx_cpu_owner_idx_next;
+ unsigned int num_of_txd;
+ unsigned int tx_cpu_owner_idx_next2;
+
+ dev->trans_start = jiffies; /* save the timestamp */
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+
+ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0);
+ num_of_txd = 1;
+ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC;
+
+ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){
+ rt2880_eth_send(dev, skb, gmac_no);
+
+ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC;
+
+ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){
+ }
+ }else {
+ ei_local->stat.tx_dropped++;
+ kfree_skb(skb);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+ }
+
+ ei_local->skb_free[tx_cpu_owner_idx] = skb;
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+}
+
+void ei_xmit_housekeeping(unsigned long unused)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ struct PDMA_txdesc *tx_desc;
+ unsigned long skb_free_idx;
+ unsigned long tx_dtx_idx __maybe_unused;
+ unsigned long reg_int_mask=0;
+
+ tx_dtx_idx = sysRegRead(TX_DTX_IDX0);
+ tx_desc = ei_local->tx_ring0;
+ skb_free_idx = ei_local->free_idx;
+ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) {
+ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){
+ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]);
+ ei_local->skb_free[skb_free_idx]=0;
+ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC;
+ }
+
+ netif_wake_queue(dev);
+ tx_ring_full=0;
+ ei_local->free_idx = skb_free_idx;
+ }
+
+ reg_int_mask=sysRegRead(FE_INT_ENABLE);
+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT);
+}
+
+EXPORT_SYMBOL(ei_start_xmit);
+EXPORT_SYMBOL(ei_xmit_housekeeping);
+EXPORT_SYMBOL(fe_dma_init);
+EXPORT_SYMBOL(rt2880_eth_send);
Index: linux-3.14.16/drivers/net/ethernet/raeth/raether_qdma.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-3.14.16/drivers/net/ethernet/raeth/raether_qdma.c 2014-08-24 15:51:48.542654066 +0200
@@ -0,0 +1,805 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
+#include <linux/if_ether.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/rt2880/surfboardint.h>
+#if defined (CONFIG_RAETH_TSO)
+#include <linux/tcp.h>
+#include <net/ipv6.h>
+#include <linux/ip.h>
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <linux/in.h>
+#include <linux/ppp_defs.h>
+#include <linux/if_pppox.h>
+#endif
+#include <linux/delay.h>
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
+#include <linux/sched.h>
+#endif
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
+#include <asm/rt2880/rt_mmap.h>
+#else
+#include <linux/libata-compat.h>
+#endif
+
+#include "ra2882ethreg.h"
+#include "raether.h"
+#include "ra_mac.h"
+#include "ra_ioctl.h"
+#include "ra_rfrw.h"
+#ifdef CONFIG_RAETH_NETLINK
+#include "ra_netlink.h"
+#endif
+#if defined (CONFIG_RAETH_QOS)
+#include "ra_qos.h"
+#endif
+
+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
+#include "../../../net/nat/hw_nat/ra_nat.h"
+#endif
+
+#if defined (TASKLET_WORKQUEUE_SW)
+int init_schedule;
+int working_schedule;
+#endif
+
+
+#if !defined(CONFIG_RA_NAT_NONE)
+/* bruce+
+ */
+extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb);
+extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no);
+#endif
+
+#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE)
+/* Qwert+
+ */
+#include <asm/mipsregs.h>
+extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle);
+extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle);
+#endif /* CONFIG_RA_CLASSIFIER */
+
+#if defined (CONFIG_RALINK_RT3052_MP2)
+int32_t mcast_rx(struct sk_buff * skb);
+int32_t mcast_tx(struct sk_buff * skb);
+#endif
+
+#ifdef RA_MTD_RW_BY_NUM
+int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf);
+#else
+int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf);
+#endif
+
+/* gmac driver feature set config */
+#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS)
+#undef DELAY_INT
+#else
+#define DELAY_INT 1
+#endif
+
+//#define CONFIG_UNH_TEST
+/* end of config */
+
+#if defined (CONFIG_RAETH_JUMBOFRAME)
+#define MAX_RX_LENGTH 4096
+#else
+#define MAX_RX_LENGTH 1536
+#endif
+
+extern struct net_device *dev_raether;
+
+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
+static int rx_dma_owner_idx1;
+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
+static int rx_calc_idx1;
+#endif
+#endif
+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
+static int rx_calc_idx0;
+static unsigned long tx_cpu_owner_idx0=0;
+#endif
+static unsigned long tx_ring_full=0;
+
+#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER)
+#include "ra_ethtool.h"
+extern struct ethtool_ops ra_ethtool_ops;
+#ifdef CONFIG_PSEUDO_SUPPORT
+extern struct ethtool_ops ra_virt_ethtool_ops;
+#endif // CONFIG_PSEUDO_SUPPORT //
+#endif // (CONFIG_ETHTOOL //
+
+#ifdef CONFIG_RALINK_VISTA_BASIC
+int is_switch_175c = 1;
+#endif
+
+//skb->mark to queue mapping table
+extern unsigned int M2Q_table[64];
+
+
+#define KSEG1 0xa0000000
+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
+
+extern void set_fe_dma_glo_cfg(void);
+
+
+/**
+ *
+ * @brief: get the TXD index from its address
+ *
+ * @param: cpu_ptr
+ *
+ * @return: TXD index
+*/
+
+static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ int ctx_offset;
+ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc);
+ ctx_offset = (*cpu_ptr - ei_local->txd_pool);
+
+ return ctx_offset;
+}
+
+
+
+/**
+ * @brief get free TXD from TXD queue
+ *
+ * @param free_txd
+ *
+ * @return
+ */
+static int get_free_txd(struct QDMA_txdesc **free_txd)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ unsigned int tmp_idx;
+
+ if(ei_local->free_txd_num > 0){
+ tmp_idx = ei_local->free_txd_head;
+ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx];
+ ei_local->free_txd_num -= 1;
+ *free_txd = &ei_local->txd_pool[tmp_idx];
+ return tmp_idx;
+ }else
+ return NUM_TX_DESC;
+}
+
+
+/**
+ * @brief add free TXD into TXD queue
+ *
+ * @param free_txd
+ *
+ * @return
+ */
+int put_free_txd(int free_txd_idx)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx;
+ ei_local->free_txd_tail = free_txd_idx;
+ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC;
+ ei_local->free_txd_num += 1;
+ return 1;
+}
+
+/*define qdma initial alloc*/
+/**
+ * @brief
+ *
+ * @param net_dev
+ *
+ * @return 0: fail
+ * 1: success
+ */
+bool qdma_tx_desc_alloc(void)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+ struct QDMA_txdesc *free_txd = NULL;
+ unsigned int txd_idx;
+ int i = 0;
+
+
+ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool);
+ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool);
+
+ if (ei_local->txd_pool == NULL) {
+ printk("adapter->txd_pool allocation failed!\n");
+ return 0;
+ }
+ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free);
+ //set all txd_pool_info to 0.
+ for ( i = 0; i < NUM_TX_DESC; i++)
+ {
+ ei_local->skb_free[i]= 0;
+ ei_local->txd_pool_info[i] = i + 1;
+ ei_local->txd_pool[i].txd_info3.LS_bit = 1;
+ ei_local->txd_pool[i].txd_info3.OWN_bit = 1;
+ }
+
+ ei_local->free_txd_head = 0;
+ ei_local->free_txd_tail = NUM_TX_DESC - 1;
+ ei_local->free_txd_num = NUM_TX_DESC;
+
+
+ //get free txd from txd pool
+ txd_idx = get_free_txd(&free_txd);
+ if( txd_idx == NUM_TX_DESC) {
+ printk("get_free_txd fail\n");
+ return 0;
+ }
+
+ //add null TXD for transmit
+ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd);
+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
+ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr);
+
+ //get free txd from txd pool
+
+ txd_idx = get_free_txd(&free_txd);
+ if( txd_idx == NUM_TX_DESC) {
+ printk("get_free_txd fail\n");
+ return 0;
+ }
+ // add null TXD for release
+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd));
+ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd));
+
+ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr);
+
+ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n");
+ printk("----------------+---------+--------\n");
+#if 1
+ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool,
+ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr);
+#endif
+ return 1;
+}
+
+bool fq_qdma_init(void)
+{
+ struct QDMA_txdesc *free_head = NULL;
+ unsigned int free_head_phy;
+ unsigned int free_tail_phy;
+ unsigned int *free_page_head = NULL;
+ unsigned int free_page_head_phy;
+ int i;
+
+ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy);
+ if (unlikely(free_head == NULL)){
+ printk(KERN_ERR "QDMA FQ decriptor not available...\n");
+ return 0;
+ }
+ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE);
+
+ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy);
+ if (unlikely(free_page_head == NULL)){
+ printk(KERN_ERR "QDMA FQ pager not available...\n");
+ return 0;
+ }
+ for (i=0; i < NUM_QDMA_PAGE; i++) {
+ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE));
+ if(i < (NUM_QDMA_PAGE-1)){
+ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc)));
+
+
+#if 0
+ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) );
+ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] );
+ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP );
+ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP );
+#endif
+ }
+ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE;
+
+ }
+ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc)));
+
+ printk("free_head_phy is 0x%x!!!\n", free_head_phy);
+ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy);
+ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy);
+ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy);
+ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE));
+ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16);
+ return 1;
+}
+
+int fe_dma_init(struct net_device *dev)
+{
+
+ int i;
+ unsigned int regVal;
+ END_DEVICE* ei_local = netdev_priv(dev);
+
+ fq_qdma_init();
+
+ while(1)
+ {
+ regVal = sysRegRead(QDMA_GLO_CFG);
+ if((regVal & RX_DMA_BUSY))
+ {
+ printk("\n RX_DMA_BUSY !!! ");
+ continue;
+ }
+ if((regVal & TX_DMA_BUSY))
+ {
+ printk("\n TX_DMA_BUSY !!! ");
+ continue;
+ }
+ break;
+ }
+ /*tx desc alloc, add a NULL TXD to HW*/
+
+ qdma_tx_desc_alloc();
+
+
+ /* Initial RX Ring 0*/
+#ifdef CONFIG_32B_DESC
+ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
+ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0);
+#else
+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
+#endif
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
+#else
+ ei_local->rx_ring0[i].rxd_info2.LS0 = 1;
+#endif
+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
+ }
+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
+
+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
+ /* Initial RX Ring 1*/
+#ifdef CONFIG_32B_DESC
+ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
+ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1);
+#else
+ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1);
+#endif
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc));
+ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0;
+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
+#else
+ ei_local->rx_ring1[i].rxd_info2.LS0 = 1;
+#endif
+ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
+ }
+ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1);
+#endif
+
+ regVal = sysRegRead(QDMA_GLO_CFG);
+ regVal &= 0x000000FF;
+ sysRegWrite(QDMA_GLO_CFG, regVal);
+ regVal=sysRegRead(QDMA_GLO_CFG);
+
+ /* Tell the adapter where the TX/RX rings are located. */
+
+ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0));
+ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC));
+ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
+ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0);
+#endif
+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0);
+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
+ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1));
+ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC));
+ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
+ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1);
+#endif
+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1);
+#endif
+
+ set_fe_dma_glo_cfg();
+
+ return 1;
+}
+
+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
+{
+ unsigned int length=skb->len;
+ END_DEVICE* ei_local = netdev_priv(dev);
+
+ struct QDMA_txdesc *cpu_ptr;
+
+ struct QDMA_txdesc *dma_ptr __maybe_unused;
+ struct QDMA_txdesc *free_txd;
+ int ctx_offset;
+#if defined (CONFIG_RAETH_TSO)
+ struct iphdr *iph = NULL;
+ struct QDMA_txdesc *init_cpu_ptr;
+ struct tcphdr *th = NULL;
+ struct skb_frag_struct *frag;
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ int i=0;
+ int init_txd_idx;
+#endif // CONFIG_RAETH_TSO //
+
+#if defined (CONFIG_RAETH_TSOV6)
+ struct ipv6hdr *ip6h = NULL;
+#endif
+
+#ifdef CONFIG_PSEUDO_SUPPORT
+ PSEUDO_ADAPTER *pAd;
+#endif
+ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr);
+ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr);
+ ctx_offset = GET_TXD_OFFSET(&cpu_ptr);
+ ei_local->skb_free[ctx_offset] = skb;
+#if defined (CONFIG_RAETH_TSO)
+ init_cpu_ptr = cpu_ptr;
+ init_txd_idx = ctx_offset;
+#endif
+
+#if !defined (CONFIG_RAETH_TSO)
+
+ //2. prepare data
+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
+ cpu_ptr->txd_info3.SDL = skb->len;
+
+ if (gmac_no == 1) {
+ cpu_ptr->txd_info4.FPORT = 1;
+ }else {
+ cpu_ptr->txd_info4.FPORT = 2;
+ }
+
+
+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
+#if 0
+ iph = (struct iphdr *)skb_network_header(skb);
+ if (iph->tos == 0xe0)
+ cpu_ptr->txd_info3.QID = 3;
+ else if (iph->tos == 0xa0)
+ cpu_ptr->txd_info3.QID = 2;
+ else if (iph->tos == 0x20)
+ cpu_ptr->txd_info3.QID = 1;
+ else
+ cpu_ptr->txd_info3.QID = 0;
+#endif
+
+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
+ if (skb->ip_summed == CHECKSUM_PARTIAL){
+ cpu_ptr->txd_info4.TUI_CO = 7;
+ }else {
+ cpu_ptr->txd_info4.TUI_CO = 0;
+ }
+#endif
+
+#ifdef CONFIG_RAETH_HW_VLAN_TX
+ if(vlan_tx_tag_present(skb)) {
+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
+ }else {
+ cpu_ptr->txd_info4.VLAN_TAG = 0;
+ }
+#endif
+
+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
+ if(ra_sw_nat_hook_rx!= NULL){
+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
+ FOE_MAGIC_TAG(skb) = 0;
+ }
+ }
+#endif
+#if 0
+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
+ cpu_ptr->txd_info4.UDF = 0x2F;
+#endif
+
+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+ cpu_ptr->txd_info3.SWC_bit = 1;
+
+ //3. get NULL TXD and decrease free_tx_num by 1.
+ ctx_offset = get_free_txd(&free_txd);
+ if(ctx_offset == NUM_TX_DESC) {
+ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least.
+ return 0;
+ }
+
+ //4. hook new TXD in the end of queue
+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
+
+
+ //5. move CPU_PTR to new TXD
+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
+ cpu_ptr->txd_info3.OWN_bit = 0;
+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
+
+#if 0
+ printk("----------------------------------------------\n");
+ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1);
+ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2);
+ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3);
+ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4);
+#endif
+
+#else //#if !defined (CONFIG_RAETH_TSO)
+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
+ cpu_ptr->txd_info3.SDL = (length - skb->data_len);
+ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1;
+ if (gmac_no == 1) {
+ cpu_ptr->txd_info4.FPORT = 1;
+ }else {
+ cpu_ptr->txd_info4.FPORT = 2;
+ }
+
+ cpu_ptr->txd_info4.TSO = 0;
+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
+ if (skb->ip_summed == CHECKSUM_PARTIAL){
+ cpu_ptr->txd_info4.TUI_CO = 7;
+ }else {
+ cpu_ptr->txd_info4.TUI_CO = 0;
+ }
+#endif
+
+#ifdef CONFIG_RAETH_HW_VLAN_TX
+ if(vlan_tx_tag_present(skb)) {
+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
+ }else {
+ cpu_ptr->txd_info4.VLAN_TAG = 0;
+ }
+#endif
+
+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
+ if(ra_sw_nat_hook_rx!= NULL){
+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
+ FOE_MAGIC_TAG(skb) = 0;
+ }
+ }
+#endif
+
+ cpu_ptr->txd_info3.SWC_bit = 1;
+
+ ctx_offset = get_free_txd(&free_txd);
+ if(ctx_offset == NUM_TX_DESC) {
+ printk("get_free_txd fail\n");
+ return 0;
+ }
+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
+
+ if(nr_frags > 0) {
+ for(i=0;i<nr_frags;i++) {
+ frag = &skb_shinfo(skb)->frags[i];
+ cpu_ptr = free_txd;
+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
+ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE);
+ cpu_ptr->txd_info3.SDL = frag->size;
+ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0;
+ cpu_ptr->txd_info3.OWN_bit = 0;
+ cpu_ptr->txd_info3.SWC_bit = 1;
+ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID
+
+ ctx_offset = get_free_txd(&free_txd);
+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
+ }
+ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID
+ }
+
+ if(skb_shinfo(skb)->gso_segs > 1) {
+
+// TsoLenUpdate(skb->len);
+
+ /* TCP over IPv4 */
+ iph = (struct iphdr *)skb_network_header(skb);
+#if defined (CONFIG_RAETH_TSOV6)
+ /* TCP over IPv6 */
+ ip6h = (struct ipv6hdr *)skb_network_header(skb);
+#endif
+ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
+ th = (struct tcphdr *)skb_transport_header(skb);
+
+ init_cpu_ptr->txd_info4.TSO = 1;
+
+ th->check = htons(skb_shinfo(skb)->gso_size);
+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
+ }
+
+#if defined (CONFIG_RAETH_TSOV6)
+ /* TCP over IPv6 */
+ //ip6h = (struct ipv6hdr *)skb_network_header(skb);
+ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
+ th = (struct tcphdr *)skb_transport_header(skb);
+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
+ init_cpu_ptr->txd_info4.TSO = 1;
+#else
+ init_cpu_ptr->txd_info4.TSO = 1;
+#endif
+ th->check = htons(skb_shinfo(skb)->gso_size);
+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
+ }
+#endif
+ }
+
+
+// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+
+ init_cpu_ptr->txd_info3.OWN_bit = 0;
+#endif // CONFIG_RAETH_TSO //
+
+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
+
+#ifdef CONFIG_PSEUDO_SUPPORT
+ if (gmac_no == 2) {
+ if (ei_local->PseudoDev != NULL) {
+ pAd = netdev_priv(ei_local->PseudoDev);
+ pAd->stat.tx_packets++;
+ pAd->stat.tx_bytes += length;
+ }
+ } else
+
+#endif
+ {
+ ei_local->stat.tx_packets++;
+ ei_local->stat.tx_bytes += skb->len;
+ }
+ return length;
+}
+
+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
+{
+ END_DEVICE *ei_local = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int num_of_txd;
+#if defined (CONFIG_RAETH_TSO)
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+#endif
+#ifdef CONFIG_PSEUDO_SUPPORT
+ PSEUDO_ADAPTER *pAd;
+#endif
+
+#if !defined(CONFIG_RA_NAT_NONE)
+ if(ra_sw_nat_hook_tx!= NULL)
+ {
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ }else{
+ kfree_skb(skb);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+ }
+ }
+#endif
+
+
+
+ dev->trans_start = jiffies; /* save the timestamp */
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+
+
+//check free_txd_num before calling rt288_eth_send()
+
+#if defined (CONFIG_RAETH_TSO)
+ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1);
+#else
+ num_of_txd = 1;
+#endif
+
+#if defined(CONFIG_RALINK_MT7621)
+ if(sysRegRead(0xbe00000c)==0x00030101) {
+ ei_xmit_housekeeping(0);
+ }
+#endif
+
+
+ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC))
+ {
+ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA
+ if (ei_local->free_txd_num < 3)
+ {
+#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL)
+ netif_stop_queue(dev);
+#ifdef CONFIG_PSEUDO_SUPPORT
+ netif_stop_queue(ei_local->PseudoDev);
+#endif
+ tx_ring_full = 1;
+#endif
+ }
+ } else {
+#ifdef CONFIG_PSEUDO_SUPPORT
+ if (gmac_no == 2)
+ {
+ if (ei_local->PseudoDev != NULL)
+ {
+ pAd = netdev_priv(ei_local->PseudoDev);
+ pAd->stat.tx_dropped++;
+ }
+ } else
+#endif
+ ei_local->stat.tx_dropped++;
+ kfree_skb(skb);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ return 0;
+}
+
+void ei_xmit_housekeeping(unsigned long unused)
+{
+ struct net_device *dev = dev_raether;
+ END_DEVICE *ei_local = netdev_priv(dev);
+#ifndef CONFIG_RAETH_NAPI
+ unsigned long reg_int_mask=0;
+#endif
+ struct QDMA_txdesc *dma_ptr = NULL;
+ struct QDMA_txdesc *cpu_ptr = NULL;
+ struct QDMA_txdesc *tmp_ptr = NULL;
+ unsigned int htx_offset = 0;
+
+ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR));
+ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR));
+ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
+ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
+
+ //1. keep cpu next TXD
+ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP);
+ htx_offset = GET_TXD_OFFSET(&tmp_ptr);
+ //2. free skb meomry
+#if defined (CONFIG_RAETH_TSO)
+ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) {
+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
+ }
+#else
+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
+#endif
+
+ //3. release TXD
+ htx_offset = GET_TXD_OFFSET(&cpu_ptr);
+ put_free_txd(htx_offset);
+
+ netif_wake_queue(dev);
+#ifdef CONFIG_PSEUDO_SUPPORT
+ netif_wake_queue(ei_local->PseudoDev);
+#endif
+ tx_ring_full=0;
+
+ //4. update cpu_ptr to next ptr
+ cpu_ptr = tmp_ptr;
+ }
+ }
+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr));
+#ifndef CONFIG_RAETH_NAPI
+ reg_int_mask=sysRegRead(QFE_INT_ENABLE);
+#if defined (DELAY_INT)
+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT);
+#else
+
+ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT);
+#endif
+#endif //CONFIG_RAETH_NAPI//
+}
+
+EXPORT_SYMBOL(ei_start_xmit);
+EXPORT_SYMBOL(ei_xmit_housekeeping);
+EXPORT_SYMBOL(fe_dma_init);
+EXPORT_SYMBOL(rt2880_eth_send);
Reference in New Issue View Git Blame Copy Permalink