42 lines
1.5 KiB
Diff
42 lines
1.5 KiB
Diff
--- a/drivers/usb/host/ehci-hcd.c
|
|
+++ b/drivers/usb/host/ehci-hcd.c
|
|
@@ -645,7 +645,7 @@ static int ehci_run (struct usb_hcd *hcd
|
|
"USB %x.%x started, EHCI %x.%02x%s\n",
|
|
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
|
|
temp >> 8, temp & 0xff,
|
|
- ignore_oc ? ", overcurrent ignored" : "");
|
|
+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
|
|
|
|
ehci_writel(ehci, INTR_MASK,
|
|
&ehci->regs->intr_enable); /* Turn On Interrupts */
|
|
--- a/drivers/usb/host/ehci-hub.c
|
|
+++ b/drivers/usb/host/ehci-hub.c
|
|
@@ -585,7 +585,7 @@ ehci_hub_status_data (struct usb_hcd *hc
|
|
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
|
|
* PORT_POWER; that's surprising, but maybe within-spec.
|
|
*/
|
|
- if (!ignore_oc)
|
|
+ if (!ignore_oc && !ehci->ignore_oc)
|
|
mask = PORT_CSC | PORT_PEC | PORT_OCC;
|
|
else
|
|
mask = PORT_CSC | PORT_PEC;
|
|
@@ -804,7 +804,7 @@ static int ehci_hub_control (
|
|
if (temp & PORT_PEC)
|
|
status |= USB_PORT_STAT_C_ENABLE << 16;
|
|
|
|
- if ((temp & PORT_OCC) && !ignore_oc){
|
|
+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
|
|
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
|
|
|
|
/*
|
|
--- a/drivers/usb/host/ehci.h
|
|
+++ b/drivers/usb/host/ehci.h
|
|
@@ -197,6 +197,7 @@ struct ehci_hcd { /* one per controlle
|
|
unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
|
|
unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
|
|
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
|
|
+ unsigned ignore_oc:1;
|
|
|
|
/* required for usb32 quirk */
|
|
#define OHCI_CTRL_HCFS (3 << 6)
|