Commit Graph

31 Commits (f7178a8d09cc2f9e163d3a54ac4304ef90cc4aa5)

Author SHA1 Message Date
Jonas Gorski a72a8da790 bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23 10:12:40 +00:00
Hauke Mehrtens c16de866d5 switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD.  This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.

In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex.  I was not able to isolate the source of the problem
(this patch, driver or H/W limitation).  The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).

I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03 01:58:01 +00:00
Jo-Philipp Wich 24f8f16390 [package] switch: the hardware must be up while configuring
Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup,
leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 21:15:41 +00:00
Hauke Mehrtens ee6b31756a switch: update for brcm47xx target
* remove suport for 2.4 kernel
* add support for bcma bus



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 20:07:58 +00:00
Florian Fainelli d83ab218fe [package] switch: fix switch-robo device reference counting
Fix incorrect device reference counting by switch-robo.

Signed-off-by: George Kashperko <george@znau.edu.ua>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 17:24:15 +00:00
Claudio Mignanti 33990405fb massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12 14:06:13 +00:00
Felix Fietkau 3bc5d6887d remove linux 2.4 support from several packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 20:43:41 +00:00
Jo-Philipp Wich 12c8561736 [package] switch: explicitely clear port mappings in unsused vlans (#7082)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 13:51:26 +00:00
Florian Fainelli a3b2c3c70b [package] fix strange LED behavior with Netgear WGT634U (#3552)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 10:27:46 +00:00
Felix Fietkau 5bdd866100 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
Florian Fainelli 13a5bcb41b [package] allow kmod-switch to be used on brcm63xx (#4599)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09 21:57:11 +00:00
Felix Fietkau a133f02be2 export switch-core.h to $(STAGING_DIR)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06 19:28:26 +00:00
Felix Fietkau 6bcd07afdd major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
Nicolas Thill 95f277fd2d fix board name for nvram and switch packages on brcm-2.4 after [8653]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 12:54:24 +00:00
Nicolas Thill 2180fa92a1 move package description to a separate definition, remove it when DESCRIPTION=TITLE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 08:34:51 +00:00
Felix Fietkau 92558d67a4 strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
Nicolas Thill 43bb58eaf6 package Makefile cleanup: remove uneeded vars
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-03 08:20:36 +00:00
Nicolas Thill 69ffd95c71 use a default VERSION field for kmod packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02 16:39:27 +00:00
Felix Fietkau 812529c2fa fix kmod-switch compile on brcm-2.4 (#1461)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 13:42:21 +00:00
Felix Fietkau 153a864700 add diag and switch support for brcm47xx-2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 01:19:24 +00:00
Felix Fietkau 4fb96c5db6 cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-20 02:01:53 +00:00
Felix Fietkau 5a32593057 replace lots of manual install commands with INSTALL_* variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 00:29:07 +00:00
Felix Fietkau 768b48f380 implement target profiles in menuconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-12 05:06:56 +00:00
Nicolas Thill 5e7e06664c standardize Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-09-23 19:23:09 +00:00
Mike Baker 2ffe012ebb set PATH in rules.mk
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-04 11:59:52 +00:00
Felix Fietkau d3a6fe9915 rewrite of the network scripts and configuration
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-07-30 03:09:09 +00:00
Mike Baker f9e5c1b1d5 credit where credit is due
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-27 00:35:46 +00:00
Felix Fietkau 24cf53528f add INCLUDE_DIR variable for $(TOPDIR)/include
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21 02:32:39 +00:00
Felix Fietkau 08cbdbc1b0 build system cleanup. move shared include files into $(TOPDIR)/include, move lzma, mkfs.* into toolchain/
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21 02:16:37 +00:00
Nicolas Thill c12c40f4a6 normalize Makefiles.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-18 18:30:40 +00:00
Felix Fietkau 2ec7843bec move target/linux/package/switch to package/, fix a bug in the ipkg dependency handling
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-05-31 16:01:46 +00:00