NAND flash is very likely to contain bad blocks.
Currently, mtd and therefore sysupgrade fails when it encounters a single bad block, potentially leaving an unbootable system.
This patch allows the mtd utility to skip bad blocks in NAND flash and complete sysupgrade successfully.
Patch by: Matthew Redfearn <matt.redfearn@nxp.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40021 3c298f89-4303-0410-b956-a3cf2f4a3e73
Function move_config should be called after or during preinit_mount_root
hook in do_mount_root function. At this state sysupgrade.tgz is not in its
place during that time when do_mount_root is called. Function move_config
is called later so the sysupgrade.tgz stays in root directory to the second
restart when it is unpacked properly.
This patch adds move_config function to preinit_mount_root hook instead
of preinit_main and changes the filename of script to be called before
80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root
within preinit_mount_root hook.
This issue was introduced for target x86. Since the target for x86_64 is
similar to x86, this issue is present also in this target. It solves the
ticket #15042 and #14088.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Tested-By: Stefan Hellermann <stefan@the2masters.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39997 3c298f89-4303-0410-b956-a3cf2f4a3e73
Function move_config should be called after or during preinit_mount_root
hook in do_mount_root function. At this state sysupgrade.tgz is not in its
place during that time when do_mount_root is called. Function move_config
is called later so the sysupgrade.tgz stays in root directory to the second
restart when it is unpacked properly.
This patch adds move_config function to preinit_mount_root hook instead
of preinit_main and changes the filename of script to be called before
80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root
within preinit_mount_root hook.
This patch solves ticket #15042 and #14088.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39996 3c298f89-4303-0410-b956-a3cf2f4a3e73
Option pbc_in_m1 is being used as a WPS capability discovery
workaround for PBC with Windows 7.
Add possibility to enable this workaround from UCI.
To enable it, turn on wps and set wps_pbc_in_m1 parameter to 1.
Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39995 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch removes dependancy of PPP from chat application as chat application can be used for other serial communication as well that is not dependant on PPP and therefore one should be able to install chat without PPP. There also are no dependencies within chat application for PPP.
Signed-off-by: Oskari Rauta <oskari.rauta at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39992 3c298f89-4303-0410-b956-a3cf2f4a3e73
To be prepared to support keepalived 1.2.10 and higher we need libnl3 or
higher. The attached patch
add some defines so that it can be build be libnl-tiny.
Patch by Thomas Heil
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39991 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add Bosch C_CAN/D_CAN driver as a kernel package. The D_CAN controller is used
on BeagleBoneBlack.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39990 3c298f89-4303-0410-b956-a3cf2f4a3e73
Build all of the can support as modules, otherwise the kernel image is
changed when a can kernel package is selected, because the can protocol
is then built in into the kernel image.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39989 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch enables including the firmware for Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260 cards in iwlagn.
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39988 3c298f89-4303-0410-b956-a3cf2f4a3e73
Trunk and the latest backport to Attitude Adjustment have the
kmod-rt2800-soc package hidden for the ramips_rt288x target.
This makes the dependency match the dependency given in the
TITLE field.
Signed-off-by: Claudio Leite <leitec@staticky.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39976 3c298f89-4303-0410-b956-a3cf2f4a3e73
A bunch of packages such as sispctl look for libusb-config to find it, install
libusb-config in staging_dir/*/host/bin which is in the TARGET_PATH.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39975 3c298f89-4303-0410-b956-a3cf2f4a3e73
The kernel Kconfig dependency lists X86, and we will fail building this module
on other platforms such as Malta.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39974 3c298f89-4303-0410-b956-a3cf2f4a3e73
Minor fix to existing patch which did not correctly implement -n support for the export command in ash. The VEXPORT flag of a variable was set in the first call to setvareq() and then remained set in the subsequent call, because the variable already existed in the environment.
Although /lib/functions.sh by default does not export variables (NO_EXPORT=1), this issue was leading to dirty environments.
Without this fix:
(ash) export A=1; export -n B=2; /bin/ash -c "echo \$A, \$B"
1, 2
With this fix:
(ash) export A=1; export -n B=2; /bin/ash -c "echo \$A, \$B"
1,
Signed-off-by: Christophe Lermytte <openwrt@lermytte.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39968 3c298f89-4303-0410-b956-a3cf2f4a3e73
Imre Kaloz
Felix Fietkau
Steven Barth
John Crispin
Luka Perkov
Florian Fainelli
Zoltan HERPAI