Commit Graph

16 Commits (f372ac28a1d3c6a10a1d97179abe6170ffeebb3f)

Author SHA1 Message Date
John Crispin 805fa5f5bd lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06 12:31:16 +00:00
Luka Perkov 38c3bb5bc1 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06 10:17:16 +00:00
John Crispin 25b1705c80 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-05 10:42:00 +00:00
John Crispin 3ffded1fa0 lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:40 +00:00
John Crispin 2958948698 lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-29 13:10:42 +00:00
John Crispin 63ec18e5ab lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25 20:54:51 +00:00
John Crispin 186b2611cb lantiq: add devicetree for TP-Link TDW8970
Signed-of-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25 20:29:15 +00:00
Luka Perkov 1206a04577 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-05 07:44:42 +00:00
John Crispin 1b8ff1a334 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-29 16:33:46 +00:00
John Crispin 94d75044c4 lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:54:03 +00:00
John Crispin 6c95162c34 lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:25:12 +00:00
Luka Perkov 0124271f8e lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-08 11:36:07 +00:00
John Crispin 1ab2d61148 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:01:06 +00:00
John Crispin 2e43b9adfe lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 16:00:50 +00:00
John Crispin 8d3add94db lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:41 +00:00
John Crispin d88043aa65 lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:32 +00:00