86bc1b40c9
config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM
...
CONFIG_LEDS_GPIO_PLATFORM went away a while ago.
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b
Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-24 10:35:20 +00:00
7874f5f140
ramips: image: increase minimum kernel partition size to 896k
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:16 +00:00
203a561365
ramips: image: cleanup and sort templates/profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30705 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:15 +00:00
217e83655d
ramips: image: use GENERIC_4M template for the ALL0256N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:14 +00:00
91b45cd433
ramips: image: introduce mkmtd/{,phys,spi} helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:12 +00:00
f22bad7c79
ramips: image: pass mtdlayout variables by value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:11 +00:00
d9eaf4f916
ramips: image: merge F5D8235V{1,2} templates
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:10 +00:00
0c62a1cbd9
ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:07 +00:00
e2b5d16506
ramips: image: introduce mkcmdline helper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:06 +00:00
faf0b199b9
ramips: image: use the GENERIC_4M template for the V11ST-FE board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:04 +00:00
4cfe6bf6c4
ramips: image: simplify Makefile a bit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30697 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:03 +00:00
6778182991
ramips: image: add MkImageLzma wrapper
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:02 +00:00
e93a3a188c
ramips: image: allow to build board specific initramfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 19:58:01 +00:00
6a379d38fe
[atm] drop backported patches as they cause regressions and oopses
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 07:42:04 +00:00
f3ef4a04f7
[lantiq] fixes etop locking issue
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23 07:42:00 +00:00
3b75f78469
ramips: merge identical switch configuration entries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:19 +00:00
e28513418b
ramips: use unified switch identifiers in uci-defaults/network
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:17 +00:00
a69ba47335
ramips: fix VLAN config of the RT-N15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 19:46:15 +00:00
999cdff204
ramips: raeth: show interrupt statistics in debugfs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:44 +00:00
6691b88bc4
ramips: raeth: add debugfs support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:42 +00:00
0feb9d42c6
ramips: raeth: rename main source file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22 13:06:41 +00:00
95b3aa418c
ramips: raeth: add missing Kconfig and Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:44:30 +00:00
1cd6916f8f
ramips: move the ethernet driver into a separate directory
...
Also clean up the Kconfig symbols.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:26:43 +00:00
b35fd0a366
ramips: rename the spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21 09:26:41 +00:00
31df1c58cb
ar71xx: switch to kmod-gpio-button-hotplug
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-20 10:51:48 +00:00
50e93c4a47
kernel: strip unnecessary symbol table information from kernel modules, reduces default squashfs size on ar71xx by about 4k
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-20 09:03:17 +00:00
48f9e5b6d4
ramips: rt3883: make rt3883_nand_data visible
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 19:40:37 +00:00
557330a449
ramips: merge 3.2 fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:23 +00:00
b38433a748
ramips: nuke 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:20 +00:00
11e405e604
ramips: rt305x: nuke built-in MTD partition maps
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:15 +00:00
c372a76f02
ramips: rt288x: nuke built-in MTD partition maps
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:11 +00:00
a9168c816d
ramips: build sysupgrade image for the V11ST-FE board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 17:52:08 +00:00
75603b2e32
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
...
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]
Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 16:44:49 +00:00
0255d701d2
brcm47xx: add code to generate images for some netgear devices
...
This is commented out until we get report of working devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 23:21:47 +00:00
9b919a07e0
brcm47xx: sprom for nvram parsing
...
This adds support for parsing sprom form nvram for sprom version form 1 to 9.
It also adds sprom from nvram support for devices on the bcma bus.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 23:08:26 +00:00
64c49080b6
ralink: rt3883: disable the 2GHz band on the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:21 +00:00
cf5d9e72cd
ramips: rt3883: make rt3883_wlan_data visible
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:16 +00:00
2eeb0d15d2
generic: add disable_[25]ghz to struct rt2x00_platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 17:36:13 +00:00
390cbbcf32
ar71xx: fix image signature for UBNT-XM boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18 14:45:52 +00:00
2f3e324a4c
generic/2.6.37: fix 'set but unused' build errors on MIPS
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-17 17:21:03 +00:00
60c571814b
ramips: extract eeprom for the built-in wlan module on the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 20:06:22 +00:00
1fe942ac16
ramips: rt3883: change eeprom file name
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 20:06:21 +00:00
66806831eb
[x86] Disable by default padding of images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:07 +00:00
f96dd212f5
[x86] Allow gzipping of squashfs images with padded jffs2 partition
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:04 +00:00
c326fbec1a
[x86] GZip only ext4 and padded images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:54:01 +00:00
7cb3f70eea
[x86] Make gzipping of images configurable via menuconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 17:53:57 +00:00
39f5515e40
ar71xx: remove duplicated define from the D-Link profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 09:03:27 +00:00
5382f512de
ramips: select HW_HAS_PCI on per-board basis
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:54 +00:00
1656aad7f8
ramips: rt3883: remove a stray character from rt3883.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:53 +00:00
98f7b38735
ramips: rt288x: don't register the PCI controller on each board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:52 +00:00
33bf9bc63b
ramips: raeth: separate ring allocation and setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 08:17:50 +00:00
0449978493
generic: add SND_PPC symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:51:44 +00:00
c1f7143622
[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:45:28 +00:00
37d73823be
[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:38:33 +00:00
3be148b333
[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:29:26 +00:00
190f75f104
[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16 07:24:45 +00:00
e66d94b91e
linux 3.2: missing generic symbols
...
These symbols are dependent on CONFIG_PCI being enabled.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 23:37:47 +00:00
2c8af97c01
ramips: rt288x: fix PCI resource conflict
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:19:02 +00:00
ff00f9e46d
[ramips] correct PCI IO/Mem resource swapping
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:13:21 +00:00
dc053cf4f0
[ramips] add Ralink V11ST-FE board support
...
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 21:13:11 +00:00
92b44035cb
ramips: raeth: add a helper function for skb allocation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:42 +00:00
4a3dcaa55d
ramips: raeth: use netdev_alloc_skb
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:41 +00:00
8d0f341a2f
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
...
This helps GCC to generare more efficient code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:40 +00:00
492f15580b
ramips: raeth: use 're' instead of 'priv' everywhere
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 18:33:38 +00:00
c51e57d972
ramips: raeth: force link down in ramips_phy_stop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:52 +00:00
846b753561
ramips: raeth: serialize ramips_link_adjust calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:50 +00:00
d50d8e09a4
ramips: raeth: add PHYLIB support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 06:47:12 +00:00
262e032a2f
linux-atm: update solos-pci driver to upstream
...
Fixes for the solos-pci driver.
- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:24 +00:00
5fdb60473d
linux-atm: headroom/padding fixes
...
Submitted upstream to netdev by Chas Williams on linux-atm.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:22 +00:00
f2983914cb
[lantiq] generate uboot environment data in target
...
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:11 +00:00
b7e4ba527f
[lantiq] fix compile error in previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:05 +00:00
f7b9691687
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:04 +00:00
65c4677884
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:45 +00:00
da1a1a53cb
ramips: rt3883: enable PCI on the RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:44 +00:00
625c6573c7
ramips: rt3883: add PCI support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:42 +00:00
11ec83deef
ramips: rt3883: sync 2.6.39 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:41 +00:00
5b15128f66
ramips: use SoC specific irq.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:40 +00:00
533f7ff4e8
[lantiq] fixes irq locking in ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:58 +00:00
02710eaa1f
[lantiq] fixes gpio_export patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:57 +00:00
ce45d49f3c
[ltq-dsl] add annex selection support to ltq_dsl package
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:49 +00:00
1c8bb38b68
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:58 +00:00
87adb998bc
ar71xx: add model detection for TL-WR842N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:57 +00:00
83a09957f7
[malta] update to 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:30 +00:00
77fdc6950a
[ar7] fix titan gpio register size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:27 +00:00
445223c05e
ramips: rt3883: update package list in the default profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:05 +00:00
4b03e2a14b
ramips: add preliminary support for the Asus RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:04 +00:00
be0de7b856
ramips: raeth: enable MDIO code for RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:03 +00:00
6ae4d22d3a
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:17:59 +00:00
f12f24fa41
[malta] add support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 12:36:34 +00:00
36b621ea55
brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:41:20 +00:00
e76a0c843e
brcm47xx: activate config bug to show warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:40:01 +00:00
38dde1e79b
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:47 +00:00
ca116aa7d9
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:46 +00:00
ea12a991e1
brcm47xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:45:27 +00:00
7c5cc15d84
brcm47xx: update usb driver for brcm47xx.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:38:10 +00:00
91cb3ccfdf
ramips: add initial support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:14 +00:00
a01fc48535
ramips: include 'linux/module.h' in the ramips_spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:13 +00:00
ef90fcb865
ramips: rt288x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:12 +00:00
48d4c19885
ramips: rt305x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:10 +00:00
d976d07b41
[cns3xxx]: enable another l2 cache errate on newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 11:22:08 +00:00
Jo-Philipp Wich
Gabor Juhos
John Crispin
Felix Fietkau
Hauke Mehrtens
Vasilis Tsiligiannis
Daniel Dickinson
Florian Fainelli
Imre Kaloz