e7ac785e74
realview: add support for 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 21:04:15 +00:00
b930eec308
kernel: add some more ARM related configuration symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 21:03:53 +00:00
09a1a79128
lantiq: apply [37258] also to the 3.9 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:28:02 +00:00
7c87681a6f
ar71xx: fix maximum watchdog timeout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:09 +00:00
24f20fee78
ramips: disable ill_acc driver by default
...
The driver seems to be causoing boot rpoblems on some SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:00 +00:00
d4b8b8d62f
ralink: drop v3.8 support
...
Signed-off-by: John Crispin <blogic@opewnrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:00:34 +00:00
6bcbd536ed
ar71xx: update to 3.10.1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 17:29:56 +00:00
4cd2167005
brcm47xx: use b53 phy driver for the switch in kernel 3.10
...
This makes it possible to use swconfig to controll the switch.
This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:11:17 +00:00
c1bd015d31
ar71xx: use uimage split for WHR-HP-G300N
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:06:01 +00:00
56386d5666
ar71xx: use uimage split for dlrtdev
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:57 +00:00
191e61e4f7
ar71xx: use uimage split for Allnet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:53 +00:00
b41b7c54af
ar71xx: use uimage split for Cameo devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:50 +00:00
cb2f4a3084
ar71xx: use uimage split for DIR-825B1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:46 +00:00
50e69a1452
ar71xx: use uimage split for Embedded Wireless Dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:42 +00:00
3b000a1480
ar71xx: use uimage split for Ubiquiti XM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:39 +00:00
e53672309b
ar71xx: increase kernel size for wndr3700 based devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:35 +00:00
246ecf6b9d
ar71xx: use uimage split for WZR-HP-G300NH2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:31 +00:00
4fe58418fb
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:27 +00:00
482ed090de
ar71xx: use uimage split for WZR-HP-G300NH
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:23 +00:00
f551bccbe6
ar71xx: use uimage split for WZR-HP-G450H
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:19 +00:00
ec6d65280b
ar71xx: enable uimage split and use it for carambola2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:16 +00:00
6079393d55
ar71xx: remove linux 3.8
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:12 +00:00
aad55d92d6
ar71xx: move the watchdog driver to the kernel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:08 +00:00
215f8e9d8e
ar71xx: set linux 3.10 as default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:04 +00:00
d631e85a63
brcm47xx: add initial support for kernel 3.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:44:45 +00:00
652844194b
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:19:58 +00:00
5c482f63ea
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:10:22 +00:00
5b1af986f6
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
fe0b737198
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:57:03 +00:00
4ea1473546
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:58 +00:00
6859bb2428
brcm47xx: do not change nvram without user interaction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:42 +00:00
8dfaf53e4d
kernel: refresh patches for kernel 3.8.13
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:56 +00:00
6390b285e9
kernel: update to kernel 3.10.1 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:09 +00:00
460f420734
kernel: update to kernel 3.9.10 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:43:10 +00:00
f78f7471c9
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:29:53 +00:00
5791ea36fd
brcm47xx: proc gets mounted without this patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 21:42:19 +00:00
14e7f6fd43
brcm47xx: remove obsolete hotplug stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 20:38:33 +00:00
21201be1f4
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 13:46:27 +00:00
0f44966ec8
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:53 +00:00
1eff8c3206
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:34 +00:00
79d759c52e
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:27 +00:00
568ed0a9f3
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:19 +00:00
c4625f0383
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:15 +00:00
584f6dfd7c
ar71xx: set priority of ath79_wdt to 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:01:08 +00:00
557954455b
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 21:28:34 +00:00
9e94c1b6b0
brcm2708: drop support for 3.3 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:11 +00:00
255edebff6
brcm2708: package the i2c master driver module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:07 +00:00
9c138f1cf4
brcm2708: package the SPI master controller driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:02 +00:00
f199e67fb7
kernel: add a bunch of missing LCD Kconfig options
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:42:58 +00:00
2de362a1e8
brcm2708: package the HW random module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:42:53 +00:00
Florian Fainelli
John Crispin
Felix Fietkau
Hauke Mehrtens