Update the MD5 of the firmware for Raspberry Pi to enable build on the Chaos Calmer / 15.05.1 target again.
The checksum changed due to changes of the Github Tar Handling as described here: raspberrypi/firmware#873
After that change, builds for RPi on 15.05.1 succeed again.
Signed-off-by: Nico Maas <mail@nico-maas.de>
This fixes memory leaks, some possible crashes and bug that could cause
WARNING on every add_key/del_key call. It also replaces WARNING with
a simple message. They may still occur e.g. on station going out of
range and A-MPDU stall in the firmware.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.
Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49378 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48897
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48899 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48895
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48898 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48883
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48884 3c298f89-4303-0410-b956-a3cf2f4a3e73
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
Backport of r47408
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48858 3c298f89-4303-0410-b956-a3cf2f4a3e73
fix rescue mode on wdr4900
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Backport of r48793
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48851 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48732
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48850 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48371
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48392 3c298f89-4303-0410-b956-a3cf2f4a3e73
This pulls in CONFIG_KEYS, which bloats up the kernel size and is thus
very undesirable. It also currently exposes the kernel to a local root
vulnerability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48364
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48365 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of [48219]
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48220 3c298f89-4303-0410-b956-a3cf2f4a3e73
It allows user-space fetch associated STAs and e.g. iwinfo/luci display
them.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48167 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patches also adds BCM4366 support which may be found on some new
routers based on BCM47094 or BCM4709C0. Unfortunately firmware is still
missing for this chipset.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48166 3c298f89-4303-0410-b956-a3cf2f4a3e73
After last commit we got few unuset slots (prefixes). Use all available
numbers one by one to allow more backports.
This doesn't change a single patch (or order), only renames files.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48164 3c298f89-4303-0410-b956-a3cf2f4a3e73
It doesn't change any single patch (or order), it only renames files.
This creates some place for more backports, as we were already using
398 prefix which left only 1 slot.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48163 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of [48152]
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48153 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48018
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48023 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47187
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47188 3c298f89-4303-0410-b956-a3cf2f4a3e73
Nico Maas
Zoltan HERPAI
Imre Kaloz
Rafał Miłecki
Sven Eckelmann
Felix Fietkau
John Crispin
Jo-Philipp Wich