Commit Graph

700 Commits (e238d1b161efa171d4a8bc9abe79a413d15135ca)

Author SHA1 Message Date
John Crispin 9944858776 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-26 13:47:42 +00:00
Felix Fietkau b0caf60f09 brcm47xx: merge FEATURES lines in the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-08 09:51:38 +00:00
Felix Fietkau 459c9c3fc6 brcm47xx: fix kmod-usb-brcm47xx build on legacy and mips74k subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-08 09:45:55 +00:00
Hauke Mehrtens 436d42c5cd brcm47xx: activate some compiler optimizations for 74K CPUs
With this patch the mips74k subtarget will be compiled with optimized 
compiler options to generated smaller and faster code. This currently 
breaks broadcom-wl, because the binary blob is only compiled with 
mipsr1 support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 17:36:02 +00:00
Felix Fietkau 7e4ffc4002 brcm47xx: move the low_mem feature flag to the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 17:21:30 +00:00
Hauke Mehrtens 3b8f1d816c brcm47xx: remove old gpio and nvram interfaces
These were only used by broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 17:04:37 +00:00
Hauke Mehrtens c8621d02f5 brcm47xx: mips74k: optimize kernel config
This saves abount 15 kB of compressed kernel size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 15:42:33 +00:00
Hauke Mehrtens 6143a2a98d bcm47xx: use eth0 for switch name
This fixes some strange problems with tg3. I assume that the Ethernet 
driver was not brought up if the switch was named switch0.

This was reported and tested by ernesto (Faulp3lz).

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 15:41:41 +00:00
Felix Fietkau 758e298a5d brcm47xx: add a "legacy" subtarget that is usable for low-end 802.11g devices like WRT54G
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-07 15:19:40 +00:00
Hauke Mehrtens 42acb52779 brcm47xx: add mips74k subtarget for newer devices
All new devices (with MIPS 74K CPU) are based on BCMA SoC and have
Ethernet core supported by bgmac. Create a new subtarget to generate
optimized builds.
This is just a beginning, further tweaks (like kernel configuration)
are still possible. This decreases default root.squashfs by ~128 kB.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-05 21:25:03 +00:00
Hauke Mehrtens 431f863e5e brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-05 21:23:58 +00:00
Felix Fietkau 6b987a0730 brcm47xx: enable the low-memory feature flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 17:04:45 +00:00
John Crispin 38c81b2552 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-02 12:43:22 +00:00
Felix Fietkau b82d436d9b kernel: add a ssb backport required for a new mac80211 update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-05-23 18:48:31 +00:00
Hauke Mehrtens 28e07a7e77 brcm47xx: profiles: fix white spaces (s/ $//)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-05-14 10:09:31 +00:00
Hauke Mehrtens ee42391db2 brcm47xx: image: respect device flash block size
We should be more careful and don't generate 128K JFFS2 images for
devices with flashes using 64K blocks (nor the other way).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-05-14 10:08:56 +00:00
Hauke Mehrtens 29489441e4 brcm47xx: image: document some defines arguments
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40761 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-05-14 10:08:22 +00:00
Gabor Juhos 0e6867db1e kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-12 11:59:07 +00:00
Hauke Mehrtens f379312b9c brcm47xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-08 19:51:36 +00:00
Hauke Mehrtens 30de67d409 brcm47xx: backport 3.14 patch for nvram GPIO pin read
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30 19:07:46 +00:00
Hauke Mehrtens ec78ae869e brcm47xx: Name LEDs colors for Linksys E1000 V2.1
Handle it by creating a new patch for simple database changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30 19:07:13 +00:00
Hauke Mehrtens 374deb8374 brcm47xx: update workarounds patch to V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30 19:06:24 +00:00
Gabor Juhos 4d85ad8010 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-27 09:28:33 +00:00
Hauke Mehrtens 63f0f18e5e brcm47xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-12 23:28:41 +00:00
Florian Fainelli 139131df37 brcm47xx: explicitely mention MIPS to avoid confusion
And while at it, fix the nomenclature, BCM947xx/953xx refer to specific boards,
while BCM47xx/BCM53xx refer to chip identification number.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-08 01:48:44 +00:00
Hauke Mehrtens 440059423a brcm47xx: b44: some fixes in combination with the switch
Let the switch start the carrier and set the duplex mode independently 
if this nic is up of not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23 18:51:56 +00:00
Hauke Mehrtens 278803f5ca brcm47xx: b44: start the phy
We did not start the PHY when an external phy was in use. Without this 
patch the driver uses half duplex mode and the switch uses full duplex 
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23 16:58:12 +00:00
Hauke Mehrtens 271866d423 brcm47xx: fix detection of some Linksys WRT54G* devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23 15:57:37 +00:00
Gabor Juhos a73d292127 kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23 10:59:40 +00:00
Hauke Mehrtens 7e03036441 brcm47xx: new patch adding arch workarounds.c
It was recently sent to linux-mips for comments. It adds workaround for
WNR3500L to enable USB port.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-04 23:32:01 +00:00
Hauke Mehrtens 70b0dad63a brcm47xx: use upstream patch removing WGT634U code
It does the same, it just reorders things

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-04 23:30:38 +00:00
Hauke Mehrtens fec6cb0c95 brcm47xx: move OpenWrt arch patches a bit further
This allows picking more upstreamed stuff

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-04 23:25:17 +00:00
Hauke Mehrtens 44a1b2d391 kernel: ssb: update ssb to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-04 22:54:29 +00:00
Hauke Mehrtens 13ef6bbc9a kernel: bcma: update bcma to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-04 22:53:52 +00:00
Gabor Juhos ae7072b9ff kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-26 11:30:34 +00:00
Hauke Mehrtens ade4aa1014 brcm47xx: add brcmsmac + bgmac profile
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 19:04:54 +00:00
Hauke Mehrtens fbc1c16f1b brcm47xx: parse model from cpuinfo
Instead of looking into the proc entry provided by broadcom-diag use
the board info from /proc/cpuinfo to get the board we are on.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:56:57 +00:00
Hauke Mehrtens 3d734a755e brcm47xx: fix led indication
Use the new led api also on brcm47xx.
The led for failsafe indication is searched for.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:56:36 +00:00
Hauke Mehrtens 3f35d3a8f2 brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:56:15 +00:00
Hauke Mehrtens f57b7b150f brcm47xx: do not use broadcom-diag
This makes brcm47xx target use the default gpio led and button driver
and not broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:55:52 +00:00
Hauke Mehrtens f6d2f50c9b brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:55:25 +00:00
Hauke Mehrtens 0d0ce9938c brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:54:38 +00:00
Hauke Mehrtens 1b5902d16c brcm74xx: fix patch for BCM4706 CPUs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:51:45 +00:00
Hauke Mehrtens b26aeffe76 brcm47xx: update mtd drivers
This backports some patches from linux upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12 18:50:45 +00:00
Gabor Juhos d3305e8570 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 232ac1e9a1 brcm47xx: fix cpu wait for BCM4706
This was called to early.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-26 23:30:10 +00:00
Hauke Mehrtens 5627388168 brcm47xx: b44: This updates the phylib patches to the version send upstream
This uses a fixed phy instead of a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-26 23:27:52 +00:00
Hauke Mehrtens 430e4caa0f brcm47xx: deactivate early printk support
This breaks some devices where the serial console is not at port 0 but 
somewhere else.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15 19:19:16 +00:00
Hauke Mehrtens 361080737b kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15 19:16:30 +00:00
Hauke Mehrtens 63e8fc3ab2 brcm47xx: misc cleanups
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 18:12:57 +00:00
Hauke Mehrtens b5fc88a75d brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other 
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 18:05:08 +00:00
Hauke Mehrtens ee624d1ddf brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
This sets both values to the OpenWrt default values. There is no reason 
to use some brcm47xx specific values here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 17:34:27 +00:00
Hauke Mehrtens bfe8628bfb brcm47xx: add vectored interrupts
This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 16:37:58 +00:00
Hauke Mehrtens 8fdbb2087d brcm47xx: add cpu overwrites
bcm47xx misses cpu overwrites for the features of the CPUs used in 
these SoCs.
Instead of manually checking, it is now known at compile time for some 
options and the compiler is able to remove the checks and optimize the 
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 16:36:38 +00:00
Hauke Mehrtens a51770782a brcm47xx: use "firmware" partition name
Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:

commit 03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date:   Sat Apr 6 22:22:26 2013 +0000

    brcm47xx: use old partition names again for kernel 3.8

    This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

    Thank you russell for spotting this problem.

I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.

This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 16:32:32 +00:00
Gabor Juhos 892e13e5c9 kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01 09:59:53 +00:00
Hauke Mehrtens 66c16ab5df brcm47xx: swap also early boot console if necessary.
Some devices are using tty1 as the default console, also swap the early 
boot console in such case. This is needed for the WGT634U.

Thank you Russell for reporting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13 18:38:18 +00:00
Hauke Mehrtens 92de1b3c56 brcm47xx: fix netconfig for inverted vlan?ports in nvram
This was observed on the Belkin Share F7D7302.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11 23:04:47 +00:00
Hauke Mehrtens 602224b52d linux/brcm47xx : Belkin F7Dx30x board detection
boardnum is unstable, so allow using NULL to make it unchecked.

A method for differentiating F7D3301 from F7D3302 using nvram is
unknown at this point. Reading the first 32bits of magic from the
"linux" mtd partition would do the trick, but these 2 are similar
enough that we don't need separate led/button definitions. Not knowing
which one you have is only a usability issue for upgrading the device:
they expect different magic numbers for their trx images.

Signed-off-by: Cody P Schafer <devel@codyps.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11 23:04:00 +00:00
Hauke Mehrtens 22e6165b04 brcm47xx: b44: fix logic in BUG_ON()
It is a problem when phydev is not set at this position and not the other way around.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11 21:23:29 +00:00
Hauke Mehrtens cf3d8e679c brcm47xx: add detection for Linksys WRT54GS V1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09 20:08:09 +00:00
Hauke Mehrtens 18e7630b18 brcm47xx: register ADM6996L switch
This patch makes it possible to use adm6996.c on first generation 
BCM47XX devices with ADM switches.

This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for 
the device.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09 19:29:46 +00:00
Hauke Mehrtens 5a7a9e7b0b brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
This closes #14367 and #14328.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05 17:09:19 +00:00
Gabor Juhos 717bb2a9cf kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05 08:25:45 +00:00
Hauke Mehrtens a51086e1b4 brcm47xx: b44: fix error handling for dummy phy creation
When the mdio bus is unregistered the newly created phy will also be 
unregistered and freed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-25 21:12:48 +00:00
Hauke Mehrtens 6b1206a158 brcm47xx: b44: add dummy phy device if we do not find any
On some devices with e.g. a BCM2535F switch the second MAC is used, but 
we can not find a phy under all addresses between 0 and 31, 0xffffffff 
is returned as phy id. If we can not find a phy at the expected address 
create a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-25 21:02:13 +00:00
Gabor Juhos 56e1cd4a8e kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 1af9091146 brcm47xx: b44: detect external phy by bit set in DevControl register
Without this patch we treated only phy addr 30 as an external phy, but 
there is a register to check that. Now we do not have to try to reset 
the switch to check for an external switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-22 21:01:35 +00:00
Hauke Mehrtens d6d62bf56c brcm47xx: activate ARP daemon support
This just add some bytes to the kernel and is activated on other targets.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-13 22:46:18 +00:00
Hauke Mehrtens 6c32d3980c kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-13 19:28:29 +00:00
Hauke Mehrtens 2ffb32dad6 brcm47xx: fix detection of some boards
This adds some more boards.

This fixes parts of #14316 and #14133.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-13 19:27:24 +00:00
Hauke Mehrtens 6b4e0c753f brcm47xx: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
    
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07 00:01:01 +00:00
Hauke Mehrtens 0abc7959a8 brcm47xx: move clock detection patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07 00:00:10 +00:00
Hauke Mehrtens 038076a0cd brcm47xx: move and rename nvram gpio patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06 23:57:11 +00:00
Hauke Mehrtens e4c5404c56 brcm47xx: update early printk patches
Early printk was disabled because it caused hangs on some devices, the 
old patches were using the CFE console now we use the normal serial 
console, it is at a constant address.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06 23:55:35 +00:00
Hauke Mehrtens cd2b261f51 brcm47xx: update board detection patches
Add patches like they are currently in the mainline mips tree and add 
some more pending patches for board detection.

* Now the board name is shown under machine in /proc/cpuinfo.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06 23:51:24 +00:00
Hauke Mehrtens e0f3beb7cc brcm47xx: b44: fix some problems with the phy
* do not try initialize a unused phy
* some improvements to the phylib patch
* do not turn the phy off when mac is off

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-06 18:31:32 +00:00
Hauke Mehrtens 32654ebc00 brcm47xx: add support for ipv6 in default network config
Modify /etc/init.d/netconfig to use UCI defaults for building the
default network config, which includes appropriate defaults for IPV6.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02 23:22:18 +00:00
Hauke Mehrtens 6212ba0165 kernel: bgmac: move other bgmac patches to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target. 

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02 22:25:26 +00:00
Hauke Mehrtens 66144f5c63 kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target. 
These are only the patches already applied in current net-next/master
branch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-02 22:24:01 +00:00
Gabor Juhos 51cd1a33de kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-27 07:19:21 +00:00
Hauke Mehrtens 8e9dab5d1c kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 21:44:28 +00:00
Hauke Mehrtens a4456bb4a5 brcm47xx: b44: bgmac: some small changes to the phylib patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 16:49:52 +00:00
Hauke Mehrtens 6da3933092 brcm47xx: bgmac: b44: add support for Byte Queue Limits
This adds support for Byte Queue Limits in bgmac and b44, now it is 
possible to use more advanced network queue control algorithms.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 15:19:25 +00:00
Hauke Mehrtens 80d7a3558d brcm47xx: update the clock fixes for BCM5354
This updates the patches for BCM5354 to the version send for upstream 
Linux inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 14:36:03 +00:00
Hauke Mehrtens 3d8f232fda brcm47xx: update board detection patches
This is now the version which was send for mainline Linux kernel 
inclusion. The data needed to detection a board is now stored in init 
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 14:33:54 +00:00
Hauke Mehrtens df9cbcd450 brcm47xx: add detection for Linksys E900 V1
Thank you Rafał for the data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-18 14:32:05 +00:00
Hauke Mehrtens 81cf14367f brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 21:09:10 +00:00
Hauke Mehrtens c24af5a0a4 brcm47xx: add detection for Phicomm M1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:53:09 +00:00
Hauke Mehrtens a2b9227c5e brcm47xx: detect Linksys E1200 V2
This adds detection for Linksys E1200 V2

Thank you Lightsword and Rafał.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:49:02 +00:00
Hauke Mehrtens 77cbd421b4 brcm47xx: mtd: bcm47xxpart: detect "factory" partition
A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e  41 42 31 38 41 32 39 30  |FCTYKQ7NAB18A290|

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:47:30 +00:00
Hauke Mehrtens db3414a7e1 brcm47xx: bgmac: implement unaligned addressing for DMA rings that support it
This is important patch for new devices that support unaligned
addressing. That devices suffer from the backward-compatibility bug in
DMA engine. In theory we should be able to use old mechanism, but in
practice DMA address seems to be randomly copied into status register
when hardware reaches end of a ring. This breaks reading slot number
from status register and we can't use DMA anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-16 19:46:34 +00:00
Hauke Mehrtens 9aa1ed8c46 brcm47xx: add detection code for Huawei E970
This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 17:00:45 +00:00
Gabor Juhos 2d7844c116 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 16:00:41 +00:00
Hauke Mehrtens 463cdf78fa brcm47xx: bgmac: allow bigger et_swtype nvram variable
Without this patch it is impossible to read et_swtype, because the 1 
byte space is needed for the terminating null byte. Now it should be 
possible to read decimal and hex vars of max 8 bit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 15:50:41 +00:00
Hauke Mehrtens 734c329b42 brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition
Most of the bcm47xx devices use TRX format for storing kernel and some
partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
(the bootloader) just writes (and later boots) TRX at some hardcoded
place and paritions can vary in the size.

However some devices don't use TRX format. Very recently we have
discovered ZTE H218N that has kernel and rootfs partitions at some
"random" places.

This patch allows Linux find a rootfs partition after installing custom
image with a CFE bootloader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 15:47:45 +00:00
Hauke Mehrtens 625e34b42c brcm47xx: update board detection patch
* Use different structs depending on the number of nvram variables to check.
* Add detection of ZTE H218N, this closes #14151.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 15:08:29 +00:00
Hauke Mehrtens 1b5c6ae762 brcm47xx: bgmac: fix internal switch initialization
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that
requires initialization. We already have code for this, but because
of the typo in code it was never working. This resulted in network not
working for some routers and possibility of soft-bricking them.

Use correct bit for switch initialization and fix typo in the define.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 09:39:19 +00:00
Hauke Mehrtens f03ec7e117 brcm47xx: detect Asus RT-N10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 16:19:21 +00:00
Hauke Mehrtens f219addf79 brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address.
Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14 16:10:37 +00:00