9f1a6bc1fb
[package] hostapd: allow mixed TKIP/CCMP for 11n
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-15 08:49:45 +00:00
10bb2b1329
hostapd: Create one control interface per virtual bssid
...
Previously hostapd created one control interface /var/run/hostapd-phyX
which only contained the first virtual bssid (for example wlan0). In
order to access the other virtual bssids with hostapd_cli add all
virtual bssids to /var/run/hostapd-phyX by specifying the ctrl_interface
parameter per bssid.
Previously the control interface looked like:
/var/run/hostapd-phyX/wlan0
Now, the control interface looks like this:
/var/run/hostapd-phyX/wlan0
/var/run/hostapd-phyX/wlan1
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14 10:52:54 +00:00
e1225a7328
hostapd: fix appending the iapp_interface variable to the config
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:56:49 +00:00
21adab3df5
hostapd: Allow rsn_preauth configuration
...
Hostapd can allow preauthentication for WPA2-EAP networks when
the interfaces through which preauthentication is allowed are
configured.
Add a new param "rsn_preauth=0/1" to the configuration that enables
or disables preauthentication on the according bridge interface.
Preauthentication for unbridged networks is not considered in this
patch.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:48:31 +00:00
a90dcbc197
[PATCH] Set auth_algs in hostapd.conf, make it configurable for WEP
...
Always set auth_algs in hostapd.conf. For WEP, auth_algs is configurable
by setting the encryption parameter of a wifi-iface to contain "open"
(1, open system), "shared" (2, shared key), or "mixed" (3, permits both
open system and shared key.) For example, use "wep+shared" for shared
key authentication. The default is default is "open" as it is more
secure than "shared" (although WEP is pretty weak regardless.) For
non-WEP, "open" is always used.
https://dev.openwrt.org/ticket/8120
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-27 11:11:04 +00:00
3bad36fbaf
[package] hostapd: Add support for 'iapp_interface' option, thanks stsp ( #7719 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-08 10:46:24 +00:00
b94a8c0025
hostapd: add preliminary wps script support (push-button only, does not handle multi-bss yet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-08 18:36:17 +00:00
68d2ffe6c7
[package] hostapd: enforce CCMP WPA cipher if hwmode is 11ng or 11na
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-30 21:24:30 +00:00
38caa87e55
[package] hostapd: allow *ccmp+tkip and *aes+tkip as well for cipher override
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-30 21:03:56 +00:00
ebf5ee501b
hostapd: add ap isolate support for mac80211
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 23:08:03 +00:00
bba1d4a53c
[package] hostapd: fixup madwifi turbo modes ( #7060 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 15:16:33 +00:00
bbdbc3b43b
When enabling MFP, hostapd will read assoc_sa_query_max_timeout and
...
assoc_sa_query_retry_timeout from it's config file. Make these options
configurable in /etc/config/wireless. To make it clear that these
options are 802.11w related, I named them ieee80211w_max_timeout and
ieee80211w_retry_timeout instead.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-24 00:23:10 +00:00
3f7af4ef3e
Enable management frame protection in hostapd, and make it configurable
...
in /etc/config/wireless. Since ath9k is currently the only driver that
supports MFP, it will only be enabled when ath9k is enabled.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-24 00:22:19 +00:00
c456468ee3
[package] hostapd: always strip "11" from hwmode value
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-21 22:35:58 +00:00
2ba4b4f580
hostapd: support creating WEP networks for mac80211 (patch by Stijn Tintel), fixes #6672
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19 01:34:44 +00:00
7b22da898b
mac80211: restructure /lib/wifi/mac80211.sh
...
use the new multi-bss single instance hostapd mode
move mac80211 specific bits out of /lib/wifi/hostapd.sh
add a new option 'htmode' for switching between HT20 and HT40+,HT40-
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 02:26:05 +00:00
daddb72ac8
hostapd: parse the option for hiding the ESSID ( #6310 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09 19:10:54 +00:00
8f88338313
hostapd: replace the wme_* config variables with wmm_* ones ( fixes #6247 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-29 14:13:47 +00:00
46b2f0a154
hostapd: implement wds ap support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 05:15:51 +00:00
2f8e54f673
mac80211: fill some important capabilities into ht_capab in the hostapd config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-04 21:53:49 +00:00
27c31f11b1
hostapd: do not configure wme when using madwifi - fixes wpa/wpa2 association problems
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-17 04:55:59 +00:00
a86094d4c7
hostapd: initialize wme to sane values
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-02 18:55:03 +00:00
88a05e95b0
[package] add additions from ( #5149 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-14 13:06:34 +00:00
8b4de5446f
[package] hostapd: Remove deprecated 'debug' configuration variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-27 22:14:21 +00:00
c73ea5d9b2
[hostapd] hostapd only supports either b or g as hwmode configuration variable.
...
If bg is set the scripts transfers it now to g mode.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-09 21:44:30 +00:00
9899ab0de2
wifi: fix hostapd + autochannel
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-27 21:14:59 +00:00
9c39fd333c
[packages] hostapd: add 11n mode and ht_capab option for hostapd
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 18:02:49 +00:00
fec8c083e7
add country code option for hostapd (patch from #4675 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 02:46:04 +00:00
13efa28c8c
fix hostapd startup for no-crypto configurations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-30 02:52:14 +00:00
6e9804e89c
[package] hostapd,wpa_supplicant: create control interfaces for hostapd_cli and wpa_cli
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-15 07:50:11 +00:00
5b30934a6f
[package] hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-31 19:09:26 +00:00
ea94e359fb
fix typo
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-30 22:49:15 +00:00
382a56d914
use pidfiles for hostapd/wpa_supplicant instead of killing all processes when bringing an interface down - fixes an issue with random hostapd death
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-29 17:26:49 +00:00
a3dae311fd
fix hostapd a/g mode if only the channel is configured in the config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-29 15:52:58 +00:00
bfc73dadf2
parse the a/g mode setting in /etc/config/wireless when setting up hostapd (instead of hardcoding it to g)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-23 18:18:21 +00:00
3f7faf2347
A WPA(2) pre-shared key can either be specified as a 8 to 63 character passphrase which is hashed to a 256 bit key together with the SSID, or a 64 character hex key. Currently, the latter option is supported by the broadcom wifi type, but no by hostapd. The attached patch allows using a 64 character hex key. ( #3935 )
...
Signed-off-by: thomas@archlinux.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-26 17:19:00 +00:00
5586633102
Fix hostapd with open access point and per-device configuration, thanks sn9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-23 21:21:04 +00:00
c7120414d1
add wpa-eap uci configs Signed-off-by: David Bird <david@coova.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-04 18:18:58 +00:00
448e90485f
change psk back to key
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18 23:40:31 +00:00
2a922765da
hostapd.sh: Fix typo. The PSK is expected in the "psk" variable, but we put it into the "key" variable.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-17 13:30:24 +00:00
a857d23752
move hostapd setup script from wireless-tools to hostapd package
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-18 12:40:27 +00:00
Jo-Philipp Wich
Felix Fietkau
Vasilis Tsiligiannis
Travis Kemen
Florian Fainelli
Hauke Mehrtens
Gabor Juhos
Andy Boyett
Michael Büsch