634e6c6b9a
brcm2708: switch to 3.14
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:55 +00:00
607f2bd2c7
brcm2708: add 3.14 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:37 +00:00
9200322d21
kernel: add missing CONFIG_BACKLIGHT_GPIO to 3.14
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:11:06 +00:00
c65ec1aa8f
brcm2708: update 3.10 patches with raspberrypi/rpi-3.10.y of 27 Apr. 2014
...
Update the 3.10 rasperry patches by rebasing raspberry/rpi-3.10-y
against linux-stable/v3.10.49.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 19:10:51 +00:00
63754762b1
kernel: merge two mtdpart.c patches
...
It does not make sense to add some code and remove is 4 patches later.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 09:44:24 +00:00
e05a6326e9
kernel: update bcma to the tag master-2014-09-26 (wireless-next)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-27 07:49:48 +00:00
c239c5f559
realview: add protocol argument to ucidef_set_interface_raw
...
Now that ucidef_set_interface_raw() has been updated to take a protocol
argument, use that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42666 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-25 19:09:17 +00:00
97fc855e6f
bcm53xx: add a patch that fixes booting problems
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-24 21:08:17 +00:00
200e1d786d
ar71xx: ar8216: tagged+untagged on ar8327 ( #12181 )
...
This allows tagged and untagged traffic together on the same port on ar8327
switch devices.
I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged
operation on AR8327N (#12181 )). I also set the vlan and port egress policies
like that change. But I change vlan_tagged in an less intrusive way. The
tagged/untagged decision is now based on the following rules:
- if vid != pvid then traffic is always tagged
- if vid == pvid then vlan_tagged stores if the traffic should be tagged
Tested on TP-Link WDR-3600 (ar8327N).
Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 10:19:58 +00:00
849e774cd2
ar71xx: ar8216: move policies, pvid to setup_port
...
This moves ingress, egress policy and pvid decisions to setup_port methods.
They arenow device type dependent.
This allows policy changes on only one device type which is needed to allow
tagged + untagged operation on ar8327.
Tested on TP-LINK WDR-3600 (ar8327N).
Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 10:18:38 +00:00
b45b9e2f46
mxs: remove 3.13
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 06:42:29 +00:00
5097d4e459
mxs: disable mmc debugging
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-23 06:38:58 +00:00
880a3d2799
bcm53xx: image: use IMG_PREFIX for chk images
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 18:11:09 +00:00
cc56566e29
bcm53xx: image: make filesystem a suffix for TRX files
...
This makes TRX files more /compatible/ with firmware files (e.g. CHK).
This will allow us to put some TRX files in BIN_DIR if we need to.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 09:16:20 +00:00
85fbc8df3c
bcm53xx: image: document arguments of various functions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 08:37:18 +00:00
fc42765c6b
bcm53xx: image: rework Makefile and merge some functions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 08:04:26 +00:00
84f61f28e7
sunxi: enable GPIO_SYSFS
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-22 06:15:45 +00:00
829584f1a6
bcm53xx: activate vfpv3 support
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:58:29 +00:00
6c0d0e04ed
bcm53xx: add nand flash driver
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42641 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:58:02 +00:00
e04bca5315
bcm53xx: update patches adding bcma support
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:57:17 +00:00
d36def3f4e
bcm53xx: add fixtrx
...
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:56:31 +00:00
1683576ed0
bcm53xx: add support for GPIOs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:18:30 +00:00
93ba0ae51f
bcm53xx: rename console fixing patch
...
This squeezes BCM5301X patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 21:02:38 +00:00
cc5d855f30
sunxi: add AXP209 to pcDuino3
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 20:31:18 +00:00
10354ca6e7
sunxi: enable AXP209 on BananaPi as well
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 17:46:50 +00:00
95302a2e8e
sunxi: enable AXP209 regulator
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 17:45:20 +00:00
a28b6e0d96
sunxi: add sunxi-ir module
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:28:06 +00:00
101af46ba0
sunxi: add support for infra receiver on A20, along with IR-related backports from 3.15
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:25:45 +00:00
835de3d421
kernel: add missing symbols for 3.14
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 16:24:28 +00:00
dcbfc72a88
sunxi: remove 3.13 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-21 15:42:36 +00:00
9d4a086a64
ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 11:07:08 +00:00
76b4032fe0
lantiq: set 3.14 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 10:52:47 +00:00
ea10c39f14
ralink: drop dwc_otg support. dwc2 seems stable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 10:52:37 +00:00
94f0028725
sunxi: update gmac with adding correct regulators on bananapi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 00:13:49 +00:00
914948ebaa
sunxi: backport late clock fixes from 3.15
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-19 00:12:53 +00:00
665f30a1df
sunxi: update dts for pcduino3 and bananapi with regulators
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42608 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:45:08 +00:00
04a55c31d2
sunxi: add usb ohci support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:34:10 +00:00
45cafa800f
sunxi: add default interface for bananaPi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:15:30 +00:00
a98d24e6e8
sunxi: add missing symbol for arch timer
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 23:12:50 +00:00
3421f4b3b6
kernel: fix backport of bcma init patch
...
Upstream bcma patch:
bcma: use separated function to initialize bus on SoC
was backported incompletely. I missed arch code change.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 21:25:36 +00:00
06cbf4e0a3
sunxi: add arm arch timer support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-17 10:15:05 +00:00
f922e26c9e
kernel: add missing config option
...
This missing option was found by the build bots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 21:39:24 +00:00
e5d6c00e3b
Lantiq: fix build warning from dsl_fs script
...
fix inclusion of functions.sh in dsl_fs init script
without this, the following error is seen during build:
./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 14:53:06 +00:00
78aaed5904
lantiq: move the lantiq,switch property into the interface node
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-16 14:53:01 +00:00
e2520eb771
sunxi: add new watchdog compats to reboot code in 3.14
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 21:05:00 +00:00
78efb4c9ca
sunxi: update profile of A13-OLinuXino to match uboot boardname, required for sdcard image
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 19:37:23 +00:00
ba33fec925
ar71xx: add qihoo 360 c301 router support
...
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.
This patch adds its initial support.
v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 10:19:38 +00:00
da18057e05
lantiq: fix switch init on vr9 SoC (3.10)
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 10:19:27 +00:00
0a3bdbd7bc
lantiq: fix switch init on vr9 SoC
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 10:19:20 +00:00
8a3628eb5c
ar71xx: add board support for ubnt loco m xw
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-09-15 10:19:14 +00:00
Florian Fainelli
Rafał Miłecki
Felix Fietkau
Zoltan HERPAI
Hauke Mehrtens
John Crispin