Swconfig needs to make sure that requested vlans/ports actually exist,
else it might read or modify memory not belonging to itself.
This patch adds a quick range check in swconfig's kernel part to
prevent accidential or intentional memory modification.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20811 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is useful for seeing what devices are detected by the system.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20785 3c298f89-4303-0410-b956-a3cf2f4a3e73
The package block-extroot depends on some builtin package like
kmod-ide-core or kmod-usb-storage. But kmod-ata-core was forgotten; this
patch fixes it.
Signed-off-by: Benjamin Cama <benoar@free.fr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20784 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch is rather a cosmetic patch. It fixes the following issues:
* Demote the unknown device message to debug level to not spam
the log.
* Fix the version print of the unknown device message.
* Output the 'attach' message only when attaching as switch driver,
not when attaching as phy driver.
* Correctly return NET_RX_DROP when dropping packets.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc: bacfire@openwrt.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20773 3c298f89-4303-0410-b956-a3cf2f4a3e73
httpd-failsafe: removed warnings, cleanup html pages
httpd-failsafe: kicking in if boot command fails
httpd-failsafe: support of ctrl-c
httpd-failsafe: fixed ether addr
thanks to Stas
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20756 3c298f89-4303-0410-b956-a3cf2f4a3e73
This avoids probing of the AR8216 chip on the eth0 interface.
Cc: backfire@openwrt.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.
This fixes the header mangling of the AR8216 driver.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
+ diag now recognizes the router
+ basic LEDs work
- 3G LED for blink does not work as for the old version
so I removed it. Maybe some GPIO probing might help.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20737 3c298f89-4303-0410-b956-a3cf2f4a3e73
Gabor Juhos
Alexandros C. Couloumbis
Lars-Peter Clausen
Florian Fainelli
John Crispin
Jo-Philipp Wich
Felix Fietkau
Ralph Hempel
Markus Wigge