Commit Graph

18868 Commits (cc88c8d687bcb110e066a35a43591de08906b0eb)

Author SHA1 Message Date
Felix Fietkau ab2b65fe3d ar71xx: Configure WNDR3700 switch LED colors properly (#8103)
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:55:16 +00:00
Felix Fietkau 10709def6d Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:53:18 +00:00
Felix Fietkau fa6072d377 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:48:22 +00:00
Felix Fietkau 90ba44f084 ar71xx: Set eth1 MAC address from EEPROM for WNDR3700
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:46:07 +00:00
Felix Fietkau 64d6dd0f2c ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:39:49 +00:00
Felix Fietkau 3717ede4b0 ath9k: fix enabling SWBA interrupts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 17:05:48 +00:00
Imre Kaloz 8700f34b1d [avr32]: upgrade to 2.6.36
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 14:18:45 +00:00
Imre Kaloz deb93fbc33 [toolchain]: use gcc 4.3.5 for avr32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 14:18:04 +00:00
Imre Kaloz b6539213ec [toolchain]: add avr32 support to gcc 4.3.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 14:17:06 +00:00
Florian Fainelli 88b6609907 [kernel] fix mvswitch PHY polling setting (#8133)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 14:09:20 +00:00
Michael Büsch 09f68e4a53 InstallDev: Move the "find" out of the lock critical section.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23858 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 12:42:37 +00:00
Michael Büsch 8238fd3971 Lock copying of directory trees to the staging dir with the "staging-dir" lock. This lock probably has to be taken elsewhere, too.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 12:28:55 +00:00
Felix Fietkau 04ad609d28 ath9k: fix a few remaining issues in the xmit queue cleanup patch - reduces packet loss under load
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 12:26:09 +00:00
Michael Büsch ad339e0d82 deptest: Capitalize failure message. Makes it easier to spot in the logs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 11:30:10 +00:00
Imre Kaloz 921371b9fc these belong to the generic config..
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 11:09:08 +00:00
Imre Kaloz a497060e39 update kernels to 2.6.32.25 and 2.6.35.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 09:01:08 +00:00
Imre Kaloz 0d2d616938 add missing 2.6.36 symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 08:49:11 +00:00
Lars-Peter Clausen b87e524914 [kernel] Add even more missing symbols to the 2.6.36 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 21:01:01 +00:00
John Crispin b27571141a [ifxmips]
* adds a rewrite of the tapi drivers + sip app. this is the result of lars' gsoc 2010 project, Thanks !


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 19:12:34 +00:00
John Crispin 5f37a84ad5 [ifxmips]
* adds patch to 2.6.35 series to make dsl work


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 19:10:56 +00:00
John Crispin 9dd62d80f1 [ifxmips]
* remove broken flag from dsl-control app


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 19:07:42 +00:00
John Crispin b30e653cda [ifxmips]
* make dsl driver work with new kernel


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 19:06:39 +00:00
John Crispin b8a8caa3d7 [ifxmips]:
* bump kernel to 2.6.35.8
* merge arcadyn mach files
* fixes ar9
* adds hack for tapi drivers



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 19:02:27 +00:00
Michael Büsch b914812321 deptest: Do not clobber the base build and staging dirs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:48:03 +00:00
Michael Büsch 73753aef90 ensure an empty BUILD_DIR variable is passed down u-boot's makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:26:26 +00:00
Alexandros C. Couloumbis 47fcad90bc package/madwifi: fix r23829 commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 16:55:51 +00:00
Alexandros C. Couloumbis f7f6bff6a1 package/madwifi: Use sema_init() instead of init_MUTEX() (based on: http://madwifi-project.org/changeset/4118)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 16:18:29 +00:00
Alexandros C. Couloumbis 76cfba7b8c target/linux: add preliminary 2.6.37 kernel support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 16:13:33 +00:00
Michael Büsch 208df9da51 deptest: --force also overrides blacklist stamps
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 15:18:53 +00:00
Michael Büsch a1b02b7ee0 deptest: Add --force to force a test
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 15:01:03 +00:00
Michael Büsch 99abe56d08 deptest: Install of host tools has to be forced for every test, because the host staging dir is cleaned prior a test.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:58:32 +00:00
Felix Fietkau d7dada693a ath9k: fix cycle counter tracking
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:56:05 +00:00
Felix Fietkau b701bc310f ath9k: fix queue pending frame counter tracking by cleaning up tx queue selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:55:59 +00:00
Felix Fietkau 03d213eff1 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:55:53 +00:00
Michael Büsch 31d0d69841 deptest: Add option for lean test
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:44:31 +00:00
Michael Büsch b964989f75 deptest: Add sanity check to avoid trouble with illegal package names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 12:49:38 +00:00
Michael Büsch e0ef43b324 deptest: Support specifying certain packages to test on the commandline.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 12:41:28 +00:00
Vasilis Tsiligiannis b848594c3c [package] hostapd: Add 'identity' config option when eap_type is 'tls' on wpa_supplicant (#8164)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 10:39:29 +00:00
Michael Büsch 286a9a67ee deptest: Add optional blacklisting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 01:10:52 +00:00
Michael Büsch 9e13ee5627 deptest: Check for .config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 00:27:50 +00:00
Michael Büsch 01a4d924f0 deptest: Install the kernel at init stage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 00:24:12 +00:00
Michael Büsch 6249f03131 deptest: Better detection of base directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 23:22:34 +00:00
Michael Büsch 686a035a49 deptest: Also make sure the toolchain is built in the initialization step. This makes it possible to run the script from within a fresh tree.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 22:48:29 +00:00
Michael Büsch d4d4d268ba deptest: Also create "failed" stamps. This makes it easier to check what failed after the script finished.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 22:36:32 +00:00
Michael Büsch e81f40a3ad deptest: Add shbang
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 21:58:24 +00:00
Michael Büsch 26dd03e83f deptest: Fix indent
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 21:57:03 +00:00
Felix Fietkau b2a72cfcdd make IGNORE_ERRORS apply to deselected packages as well (typically triggered through dependencies)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 16:38:57 +00:00
Felix Fietkau 4bee541877 make the display support feature flag selectable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 16:26:57 +00:00
Imre Kaloz d7a7570709 [toolchain]: switch to uClibc 0.9.31
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 13:57:57 +00:00
Imre Kaloz 32fd75022d [toolchain]: switch to binutils 2.20.1 (except for avr32 and ubicom32)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-02 13:57:04 +00:00