f920c0fa5c
include: remove SDK exception from package install targets
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-07-02 11:39:28 +00:00
31e661bebd
build: allow packages to declare ABI versions to detect necessary package rebuilds
...
If a package directly depends on another package that recently changed
its ABI version, it will be cleaned up and rebuilt (assuming quilt is
not used).
This helps with packages that have no stable ABI, e.g. libubox, ubus,
etc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-02-23 17:32:04 +00:00
44743dc6b4
build: remove SourceFile and SourceURL from opkg metadata - they are useless without the corresponding openwrt package directory
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-13 10:40:19 +00:00
dd38ccf620
build: print missing dependency error to stderr
...
Allow to see the actual error even when compiling with V=w/V=1 only.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37388 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-18 11:29:18 +00:00
61b763d414
build: add required exports for dependency tracking
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-18 11:18:37 +00:00
0cc7b30e78
build: add kernel modules to package provides info (along with shared libs)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-18 10:47:00 +00:00
63f47d5dbf
include/package-ipkg.mk: print warnings/errors to stderr
...
Makes warnings/errors visible when building with V=w/V=1.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-21 11:45:20 +00:00
28b1b94a65
build: reduce the size of package metadata a bit to keep package list files smaller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 19:56:21 +00:00
ee76e2804a
buildroot: isolate the .install stamp files for build variants ( #12279 )
...
This fixes missing embedded packages if multiple build variants are selected in
the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and
CONFIG_PACKAGE_ppp-multilink=m .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07 16:15:22 +00:00
a81ef914e0
licensing: Add licensing metadata to many packages
...
Two new variables are introduces to many packages, namely PKG_LICENSE and
PKG_LICENSE_FILES - there may be more than one license applied to packages,
and these are listed in the PKG_LICENSE variable and separated by spaces.
All relevant license files are also added to the PKG_LICENSE_FILES variable,
also space separated.
The licensing metadata is put into the bin/<platform>/packages/Packages file
for later parsing. A script for that is on it's way!
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19 15:34:28 +00:00
6683f47568
build: rework the package/install step - collect package install lists during package/compile, then install all packages at once
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-06 16:01:06 +00:00
f1a3abbd19
[include] package-ipkg.mk: flag packages as "ok" after install
...
By flagging compile-time-installed packages as "ok", they can be differentiated
from runtime-installed packages on the target later on.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32739 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-15 19:29:43 +00:00
88364f16c2
include/package-ipkg.mk: fix copying provides list introduced in r32332
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-14 18:09:54 +00:00
2a372d147f
[include] package-ipkg.sh: copy the package provides list for all virtual PROVIDES
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 11:42:17 +00:00
bee3dd6a1b
build: add checks for missing package dependencies
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-11 00:57:36 +00:00
9db9b0ede7
build: generate a list of provided libraries for each ipkg file (includes provided libraries from packages that the exporting package depends on)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-10 20:27:41 +00:00
145b0ef954
include/package-ipkg.mk: fix typo in r29449
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-10 22:02:50 +00:00
68b5c56aed
include/package-ipkg.mk: don't add vi backup files to packages
...
Also remove trailing whitespaces.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:00 +00:00
a133a1a62b
include/package-ipkg.mk: fix typo
...
Fix a typo that caused packaging of an empty ./lib/upgrade/keep.d
directory when the package supplied conffiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26 00:49:07 +00:00
6f8262a64a
build: move the SH_FUNC eval to the beginning of the opkg control file build command chain, not in front of every single command
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03 02:10:32 +00:00
8249039087
build: do not use shell calls to export empty opkg control files, speeds up package build and fixes some "Argument list too long" errors
...
Patch by Thomas Langer from #8450
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-03 02:07:59 +00:00
2af73d5a20
[include] deploy .ipk archives with --force-maintainer to ensure that configs are kept up-to-date in case they exist already for various reasons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-06 23:52:13 +00:00
54e97dad67
[include] set Installed-Size to 0 when preparing control, its substituted by ipkg-build later on
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-16 22:18:35 +00:00
2a5914606c
[include] package-ipkg.mk: add support for "essential" package flag, fix typo
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-11 16:18:01 +00:00
d4b77f3145
Lock copying to STAGING_DIR_ROOT. This fixes build failures for parallelized build.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-29 15:07:23 +00:00
0aedfbfd70
[include] package-ipkg.mk: build sysupgrade keepfile hints out of conffiles not yet present in the package.
...
This applies to config directories or files that do not exist but may be created by the
user after package installation.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05 19:20:27 +00:00
6c7a71c78e
[include] correct default package status info (install -> unknown) - fixes "opkg_conf_write_status_files: Internal error: package ... has a NULL dest"
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04 17:20:49 +00:00
974c5831e0
[include] prime .ipk control files with Status: field to introduce hold for post flash installed packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-02 04:04:12 +00:00
30b7385634
[include] add support for flagging packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-02 03:21:33 +00:00
b587a7b92a
package-ipkg.mk: use the BOARD variable in opkg cmdline if ARCH_PACKAGES is not defined
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01 07:09:34 +00:00
f10bd899e6
[package] opkg:
...
- implement --add-dest and --add-arch commandline options, this allows to run entirely without configuration
- tweak default config location patch to not require a config in offline root mode
- rename --force-run-hooks option to --force-postinstall, its a more appropriate name
- utilize new opkg commandline options in package-ipkg.mk and remove config file generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-12 21:16:02 +00:00
0d80fe1320
[include] pass opkg offline root as command line arg, solves caching issues when switching between multiple subtargets, thanks Ralph Hempel for reporting
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-09 21:05:51 +00:00
d9386d548b
[package] opkg: add --force-run-hooks option to run postinstall scripts in offline root mode, utilize it for host package install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-06 19:58:05 +00:00
e6b1eeef0c
[buildroot] use opkg/host for package installation
...
- speeds up rebuild operations
- aligns generated package list format with the one created by opkg on the target
- fixes broken dependency handling in imagebuilder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-06 02:15:46 +00:00
e045698909
speed up the ipkg build process some more by reordering commands
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-19 12:49:46 +00:00
14be678094
speed up the build system by including include/shell.sh on shell commands only where necessary
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-19 12:49:37 +00:00
503d7a462b
[buildsystem] revert r22372 and r22405, dependency on host libtool causes problems
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-28 02:18:16 +00:00
fc7a57fa5d
[buildsystem] use host opkg for installing packages in buildroot and ImageBuilder
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22372 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-23 19:49:19 +00:00
5e7275d823
Some dependencies that are depending on target are not added into
...
the Depends line in the control file of the package.
For example +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb does not
result in kmod-ssb for the x86 target or any other target.
This fixes #6874
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 19:22:59 +00:00
0f48fd8058
build variants: only build opkg packages for the requested build variant (or any if no variant was specified for the package)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-22 07:08:39 +00:00
707cf19632
do not fail on empty packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-03 02:53:13 +00:00
848413fba4
get rid of old data before staging unstripped package binaries
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-03 01:10:37 +00:00
a014ef6f93
build: when staging unstripped package files, install them to a temporary directory first to work around file overwrite issues in packages like asterisk
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-02 19:01:09 +00:00
2244492d6a
merge the control file and the .ipk file targets into one to prevent them from going out of sync
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-20 15:48:41 +00:00
6073aa6f2e
fix multiple ipkg builds of the same arch but with different targets in the same checkout
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-20 14:04:40 +00:00
cdb9ae12f9
when regenerating an ipkg package, make sure the entire ipkg build dir is cleaned as well to prevent stale files from making it into the package after configuration changes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-19 15:12:54 +00:00
76260922ff
[package] ensure CONTROL directory is created ( #5683 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-17 10:14:25 +00:00
37a1dc4602
add target for library specific installations into the root staging dir, fix ipkg build dependency on the package build stamp
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-08 02:24:37 +00:00
079bbf2ee7
add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-07 21:58:35 +00:00
044375f28e
move IPKG_STATE_DIR from ./rules.mk to ./include/package-ipkg.mk and change its value to suit opkg
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 20:13:01 +00:00
Jo-Philipp Wich
Felix Fietkau
Jonas Gorski
Hamish Guthrie
Nicolas Thill
Gabor Juhos
Michael Büsch
Hauke Mehrtens
Florian Fainelli