Commit Graph

21 Commits (c87db17012cc2cec83da79e847fe7283dc6117ad)

Author SHA1 Message Date
Mirko Vogt fd18877418 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:46 +00:00
Florian Fainelli bfd69b4134 kernel: add missing USB configuration symbols after r34501
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-07 11:01:53 +00:00
Gabor Juhos b7b3fce329 x86: remove support for old kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
Gabor Juhos 7503ab47c1 x86: remove subtarget specific LINUX_VERSION overrides
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
Gabor Juhos 715476a93a x86/olpc: switch to 3.3
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
Gabor Juhos 8ace34552a x86: sync 2.6.39 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
Gabor Juhos cb4c118e50 linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
Felix Fietkau a1d04e3c69 x86: refresh config, enable pci express support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-17 22:41:17 +00:00
Jo-Philipp Wich 9e670ac6c9 [x86] Add OLPC kernel config (patch by Acinonyx)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 15:31:19 +00:00
Jo-Philipp Wich 3489e823b3 [x86] Remove support for older kernels (patch by Acinonyx)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 15:29:22 +00:00
Hauke Mehrtens ecf34611c7 x86: do no overwrite CONFIG_SCSI_LOWLEVEL
CONFIG_SCSI_LOWLEVEL is needed for some packages.
Backport commit r19759 into kernel 2.6.30


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-21 14:02:30 +00:00
Imre Kaloz 66ee5acfff clean up handling of some kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-11 09:33:16 +00:00
Jo-Philipp Wich 536f5da5d3 [x86] preinit: use grep -q where applicable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01 00:33:34 +00:00
Felix Fietkau 6796f8ddbb preinit: Remove Ctrl-C prompt...impossible on /dev/console (patch by cshore)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-28 19:27:49 +00:00
Felix Fietkau fd4ddfd240 add preinit modularization work by Daniel Dickinson (cshore)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
Imre Kaloz 156fc688cb some more Kconfig symbol move..
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:52:41 +00:00
Imre Kaloz 9d5ce6e269 another round of kernel config cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 11:42:24 +00:00
Imre Kaloz ff8305e702 sort all target config files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-11 09:27:13 +00:00
Florian Fainelli 6b0002d8ff [x86] add olpc 2.6.31 configuration, forward port the block2mtd patch, refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-07 12:32:25 +00:00
Florian Fainelli e43f4cf27f [x86] the olpc config that was merged from the olpc port is a 2.6.30 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-07 12:16:31 +00:00
Florian Fainelli 1f8e50c932 [x86] merge the olpc target with the x86 target, both tested and running
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03 01:02:39 +00:00