ed7f15e6cf
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-04 08:43:07 +00:00
729eb335e4
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:20:03 +00:00
8eb654c4ef
ramips: define GPIO chips separately for each SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:59 +00:00
2e1b24966f
ramips: move GPIO definitions into a separate header file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:57 +00:00
878f3adcc0
ramips: setup GPIO chip functions on the fly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:51 +00:00
c31af34adb
ramips: use separate register base for GPIO chips
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:48 +00:00
2775635f6a
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:45 +00:00
337e5d8f01
ramips: enable MDIO on the HW550-3G board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:41 +00:00
3dbd1d3156
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27 19:19:40 +00:00
f564424e07
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13 16:34:52 +00:00
9ad6aac6db
ramips: register watchdog device on the rt288x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:52 +00:00
7c1dfa1706
ramips: add watchdog device for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:50 +00:00
777c494bef
ramips: register watchdog device on the rt305x boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:47 +00:00
51c418f726
ramips: add watchdog device for RT305x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:46 +00:00
044ba6d28f
ramips: implement clock API for RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:39 +00:00
0bd787a602
ramips: implement clock API for RT305X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:35 +00:00
baa05587d0
ramips: remove extern and __init from function prototypes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26 20:48:33 +00:00
91714565c1
ramips: handle OTG interrupt on the RT305x SoC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:25 +00:00
418e052c05
ramips: ramips_esw: convert it to be a platform driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08 10:15:00 +00:00
582dad46c0
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05 20:14:30 +00:00
231f17d61e
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:23 +00:00
966de4fbd4
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
d572e1483f
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15 09:43:07 +00:00
62d8c17df5
ramips: register ethernet device on the RT-N15
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:46 +00:00
5c7c1c3dba
ramips: add generic ethernet device for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:43 +00:00
69e79c381f
ramips: add mdio_cfg configuration for the ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 19:45:40 +00:00
33eba7e060
ramips: protect GPIO register access with a spinlock
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13 16:52:04 +00:00
c463512391
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31 11:57:32 +00:00
464c781c2b
ramips: merge slab patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:28 +00:00
5430b616f4
ramips: use COMMAND_LINE_SIZE directly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28 19:45:24 +00:00
0baf6687af
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22 09:25:37 +00:00
0b03ed8938
ramips: annotate device register function prototypes with __init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:28 +00:00
21a793245c
ramips: register wifi device for the RT2880 based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:23 +00:00
d06a46616e
ramips: add wifi device for the RT2880 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31 08:40:20 +00:00
7e95b7a597
ramips: register wifi device on the rt305x based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 21:24:10 +00:00
b58b53b236
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 12:04:05 +00:00
cfafa18012
[ramips] Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30 10:06:05 +00:00
a6165a962c
ramips_eth: pass sys_clk via platform_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31 17:56:30 +00:00
64604acf17
ramips: register gpio buttons on the Fonera 2.0N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:52 +00:00
5bf32a94ca
ramips: register gpio buttons on the WHR-G300N board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:49 +00:00
c5436e9b6d
ramips: register gpio buttons on the V22RW-2x2 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:47 +00:00
d6e8454581
ramips: register gpio buttons on the DIR-300 revB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:44 +00:00
af219a1496
ramips: fix wrong base addresses for the RT288x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:41 +00:00
76a944fdca
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:36 +00:00
0114fbb17b
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:33 +00:00
3ee7842268
ramips: cleanup WZR-AGL300NH board support file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:29 +00:00
6081d8167f
ramips: register gpio-buttons on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:25 +00:00
70c02eb229
ramips: add common gpio-buttons device
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:20 +00:00
055f8363db
ramips: register rtl8366s device on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:16 +00:00
7a147bbabd
ramips: sanitize return value of ramips_gpio_get
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 15:25:08 +00:00
Gabor Juhos
John Crispin