c24f91a021
ar71xx/image: fix imagesize of template tplink-8mlzma
...
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-18 10:19:09 +00:00
72d44356bb
brcm63xx: fix bcm96318ref_p300 profile name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-18 09:34:17 +00:00
389d99c170
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 18:52:15 +00:00
70a75d6f0c
imx6: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 13:47:13 +00:00
30b7b3068f
kirkwood: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 13:47:09 +00:00
ff389fdc21
brcm47xx: add buttons support for WRT310N v2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 08:12:00 +00:00
f8f24da4df
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 06:03:00 +00:00
491e568849
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-17 05:45:46 +00:00
2d981de1e7
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 21:43:27 +00:00
cef70e56fe
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
...
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 21:20:37 +00:00
ef9aea6713
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:43:11 +00:00
48732ce05d
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:55 +00:00
6ff9f53c3d
bcm53xx: add power button for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:48 +00:00
33db3e4435
bcm53xx: add USB LED for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:42 +00:00
6894bbd36f
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:36 +00:00
6013640624
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:15 +00:00
60d920e95b
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 20:09:08 +00:00
1d682d38f8
mvebu: better integrate xp-gp
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 13:53:57 +00:00
8331de537d
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 12:18:34 +00:00
3ec7a94d57
mvebu: add support for the Linksys Caiman and Cobra
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 09:54:39 +00:00
89b99d1177
mvebu: bring back CONFIG_CPU_THERMAL
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 00:23:34 +00:00
25240375ea
mvebu: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-16 00:10:42 +00:00
7c0b51e373
mvebu: fix typo in marvell profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-15 16:23:20 +00:00
c802282317
mvebu: better integrate 385-ap-db
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-15 16:23:10 +00:00
08c43383e7
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-15 16:06:20 +00:00
b3af1ac7a4
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-15 16:06:14 +00:00
8614d100c8
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-14 20:50:59 +00:00
0d8a721eb1
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-14 20:50:46 +00:00
7e5b2bf5b8
ar71xx: Enable AT803X_PHY to set special flags
...
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-14 19:00:57 +00:00
4b0764d07f
ar71xx: fix ethernet packet loss issues on OM5P-AN
...
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-14 19:00:51 +00:00
054044ff91
kernel: update bgmac patches to the latest version submitted
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-14 12:17:20 +00:00
6b5fcf103d
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45426 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 22:23:37 +00:00
9882aa8649
kernel: finally remove layer7 filter support
...
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 22:23:14 +00:00
2fb7989420
kernel: fix more bgmac dma init/cleanup issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 20:08:30 +00:00
c086443411
mvebu: copy the initramfs files to the bin dir
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 20:06:47 +00:00
402c9a689e
kernel: sync bgmac changes with latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45420 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 17:32:33 +00:00
aef07fb7c8
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45419 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 17:32:25 +00:00
ab2b5dc9a6
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 17:32:18 +00:00
f40359b53a
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45417 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 17:32:12 +00:00
3e82fc510d
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 17:32:05 +00:00
412d1e64ea
mvebu: add support for the in-CPU RTC on the Armada 38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 13:06:34 +00:00
4c0754e533
mvebu: add comments to image generation
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 12:15:40 +00:00
f4781e1591
mvebu: stop legacy image generation
...
If you can't find the firmware for you board, send proper patches.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 12:08:42 +00:00
b1c82b87fc
mvebu: generate a single firmware for the 385-db-ap
...
This has been done without having a board, but should work.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 12:06:56 +00:00
45bd4eaea3
mvebu: reflect Armada 38x support in the name
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-13 11:30:39 +00:00
11943811ca
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-12 22:10:44 +00:00
0ece8f9904
kernel: bgmac: add more DMA related fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-12 22:10:40 +00:00
92266f56f4
ppc40x: upgrade to 3.18
...
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-12 20:48:13 +00:00
fb8d699ae7
orion: upgrade to 3.18 (compile tested only)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-12 20:45:55 +00:00
3121f1f9dc
bcm53xx: try to handle Netgear R8000 VLANs config
...
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-12 20:11:25 +00:00
John Crispin
Jonas Gorski
Felix Fietkau
Luka Perkov
Rafał Miłecki
Imre Kaloz