Commit Graph

63 Commits (bd9b9ef3d176dc87edf1c0bf98c8e5bb00bc0344)

Author SHA1 Message Date
Hauke Mehrtens 63c477708e [packages] switch: warn if ndo_do_ioctl is not implemented in the Ethernet driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 12:29:23 +00:00
Hauke Mehrtens 1e9116b365 [package]: switch: improve error message
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 10:57:38 +00:00
Hauke Mehrtens 368889cbfe [packages] switch: clean up robo switch driver
* remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 13:10:43 +00:00
Hauke Mehrtens b37db09843 brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-04 19:46:25 +00:00
Jo-Philipp Wich 24f8f16390 [package] switch: the hardware must be up while configuring
Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup,
leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 21:15:41 +00:00
Hauke Mehrtens b8d85a1212 switch: fix some memory leaks in switch_parse_vlan()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28 13:52:37 +00:00
Hauke Mehrtens ee6b31756a switch: update for brcm47xx target
* remove suport for 2.4 kernel
* add support for bcma bus



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 20:07:58 +00:00
Florian Fainelli d83ab218fe [package] switch: fix switch-robo device reference counting
Fix incorrect device reference counting by switch-robo.

Signed-off-by: George Kashperko <george@znau.edu.ua>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 17:24:15 +00:00
Florian Fainelli b2ef939d74 [package] remove whitespaces in kmod-switch sources
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-20 22:25:04 +00:00
Claudio Mignanti 33990405fb massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12 14:06:13 +00:00
Felix Fietkau 3bc5d6887d remove linux 2.4 support from several packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 20:43:41 +00:00
Jo-Philipp Wich 12c8561736 [package] switch: explicitely clear port mappings in unsused vlans (#7082)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 13:51:26 +00:00
Nicolas Thill 24269ba691 switch: suppress boot error message on 2.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 01:12:57 +00:00
Jo-Philipp Wich 866a8f1140 [package] switch:
eliminate the asterisk from the switch port configuration and set it
	automatically on the first vlan, this aligns the broadcom vlan config
	with the swconfig format


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 16:40:06 +00:00
Florian Fainelli 4a8472619f [package] switch: do not include linux/autoconf.h (#6513)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 12:57:57 +00:00
Jo-Philipp Wich 48b86bd36e [brcm-2.4] change switch config to swconfig style format to remain consistent accross platforms
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18425 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-15 18:43:46 +00:00
Florian Fainelli 7b6bda3ebf [package] fix breakage on wl500gp after r18214, thanks sn9 (#6084)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03 20:35:37 +00:00
John Crispin ef50787039 make etehrent work on wrt350n, thx sn9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-29 21:26:36 +00:00
Hauke Mehrtens 9f266abb8c [brcm47xx] add patches for kernel 2.6.31
This is completly untested. Only a compile tests with the default config was done!


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-26 11:48:48 +00:00
Florian Fainelli 0161324044 [package] fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson (#5053)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-05 06:32:45 +00:00
Florian Fainelli 192a9d2514 [package] prevent kmod-switch from accessing nvram on brcm63xx (#5035)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-02 10:01:09 +00:00
Florian Fainelli e6654449d4 [package] fix nvram_get checking on non-WGT634U (#4975)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-21 09:25:51 +00:00
Florian Fainelli a3b2c3c70b [package] fix strange LED behavior with Netgear WGT634U (#3552)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 10:27:46 +00:00
Felix Fietkau 5bdd866100 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
Florian Fainelli 13a5bcb41b [package] allow kmod-switch to be used on brcm63xx (#4599)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09 21:57:11 +00:00
Felix Fietkau 1cb52372bc switch: remove message about BFL_ENETADM not being set on systems with a roboswitch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-02 23:14:16 +00:00
Felix Fietkau ec81fa9d4e (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:10:27 +00:00
Peter Denison a824434922 [bcm47xx] Stopgap compilation fixes for diag and switch under 2.6.25
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11231 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20 22:33:45 +00:00
Peter Denison 2ad42a8a5a Allow package/switch to compile against 2.6.25
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-14 15:03:05 +00:00
Michael Büsch d2b655da2b Check the return values of kmalloc()
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-13 15:22:46 +00:00
Felix Fietkau 9cae1e48f5 fix switch-robo.c compile errors on linux 2.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-01 15:34:17 +00:00
Michael Büsch d1b25e6b6b Fix the roboswitch code for the WRT350N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-27 22:35:41 +00:00
Michael Büsch 378e11cb84 ssb: Make the GPIO API reentrancy safe.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 15:22:17 +00:00
Felix Fietkau a133f02be2 export switch-core.h to $(STAGING_DIR)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06 19:28:26 +00:00
Felix Fietkau 45fb09db51 fix adm switch misdetection, which led to bogus button events that caused the system to shut down
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:09 +00:00
Felix Fietkau 6bcd07afdd major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
Nicolas Thill 95f277fd2d fix board name for nvram and switch packages on brcm-2.4 after [8653]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 12:54:24 +00:00
Nicolas Thill 2180fa92a1 move package description to a separate definition, remove it when DESCRIPTION=TITLE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 08:34:51 +00:00
Felix Fietkau 92558d67a4 strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
Nicolas Thill 43bb58eaf6 package Makefile cleanup: remove uneeded vars
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-03 08:20:36 +00:00
Nicolas Thill 69ffd95c71 use a default VERSION field for kmod packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02 16:39:27 +00:00
Felix Fietkau 812529c2fa fix kmod-switch compile on brcm-2.4 (#1461)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 13:42:21 +00:00
Felix Fietkau 9a1beb72da fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke the old brcm-2.6 port, close #1312, #1451
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 03:37:40 +00:00
Felix Fietkau 153a864700 add diag and switch support for brcm47xx-2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 01:19:24 +00:00
Felix Fietkau 4fb96c5db6 cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-20 02:01:53 +00:00
Felix Fietkau 0d6d6e4608 fix memory leak in switch drivers (patch from #1132)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-07 14:59:43 +00:00
Florian Fainelli 35f8bb1fb2 Fix the counters bug (#983)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-27 19:35:13 +00:00
Felix Fietkau 3f9dd11070 prepare packages for kernel upgrade to 2.6.19
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5786 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-14 08:00:20 +00:00
Florian Fainelli 9fce41951e Add Trendware TEW-411BRplus (#1038)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-11 21:46:31 +00:00
Felix Fietkau 5a32593057 replace lots of manual install commands with INSTALL_* variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 00:29:07 +00:00