Allow multi-threaded applications to work properly by
removing the "no-threads" flag that is enabled by default.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39048 3c298f89-4303-0410-b956-a3cf2f4a3e73
Saves around 10K.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39025 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add a new "reload" command that reloads the netifd config as well
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38989 3c298f89-4303-0410-b956-a3cf2f4a3e73
prepare for using /var/run/hostapd instead of /var/run/hostapd-phy*
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38986 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is only needed by BCM4716 and not by BCM4706, I haven't seen any
problems there. Adds the write flush for some more parts where the phy
control regs are written.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38977 3c298f89-4303-0410-b956-a3cf2f4a3e73
DMI_EXACT_MATCH was added to the kernel in version 3.10.21 and collides
with backports version. DMI_EXACT_MATCH is only used by the intel GPU
driver which is not build by OpenWrt, so remove it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38976 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38943 3c298f89-4303-0410-b956-a3cf2f4a3e73
Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus
the module is not generated.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38913 3c298f89-4303-0410-b956-a3cf2f4a3e73
Before this patch, if we specify a plugin specific option through
`pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd
would quit with the following error in log.
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are:
This is due to the requirement that function add_option() should be
called by the plugin_init() function first before pppd can parse those
options.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38911 3c298f89-4303-0410-b956-a3cf2f4a3e73
* fix up the order of respawn parameters for ubus
* add a event broadcast function
* add debug level handover between preinit and main process
* make the service running trigger be queued directly after the service was startetd
* Allow process respawning forever
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38868 3c298f89-4303-0410-b956-a3cf2f4a3e73
add a renqueue_add_first() api
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38866 3c298f89-4303-0410-b956-a3cf2f4a3e73
- instead of writing one (or more) ACCEPT rules in the filter table
for each redirect install a global ctstate DNAT accept rule per zone
- discard rules and redirects which have invalid options set instead
of silently skipping the invalid values
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38849 3c298f89-4303-0410-b956-a3cf2f4a3e73
This file is still needed with the new firmware.
This fixes r38835.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38843 3c298f89-4303-0410-b956-a3cf2f4a3e73
move xfsprogs to the right submenu
e2fsprogs, btrfs-progs and other stuff is there already
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38838 3c298f89-4303-0410-b956-a3cf2f4a3e73
Current version of ath10k in the recently updated wireless-testing
package requires a new firmware. This patch fixes the issue.
v2:
* fix (hopefully) the mangled whitespaces
* actually install the new firmware instead of the old
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38835 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch was copied from a more recent backports versions. This fixes
a build problem with kernel < 3.6.
This closes#14475
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38833 3c298f89-4303-0410-b956-a3cf2f4a3e73
move log service from procd to ubox
some debloating on procd
the preinit part of procd is now also a seperate binary
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38822 3c298f89-4303-0410-b956-a3cf2f4a3e73
The correct bits are now cleared in the IPv6 address as the shift
value to the correct byte in the IPv6 address was wrong. Depending
on the stack values this could result in a hanging 6rdcalc program
due to an endless loop.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38818 3c298f89-4303-0410-b956-a3cf2f4a3e73
RIPEMD is needed to update erlang and i'd like to enable RIPEMD160 support in openssh.
Size compared:
openssl without RIPEMD/160 support:
647K 29. Okt 20:00 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk
openssl with RIPEMD/160 support:
652K 8. Nov 15:11 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk
So the file size just grows ~5kb, which shouldn't be a problem.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38809 3c298f89-4303-0410-b956-a3cf2f4a3e73
The current implementation of mtd will not append the backup
file created by sysupgrade to the correct partition, as mtd will append
the data to first jffs2 partition it finds. As the kernel is also
stored on a jffs2 partition (which resides before the overlay
partition), the data will be appended to this partition.
To fix this problem, a new option
-s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"
is added to mtd.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38807 3c298f89-4303-0410-b956-a3cf2f4a3e73
In commit r38690, the MAC address canonicalization
has been converted to use 'tr' instead of 'printf'.
This only works if with MAC addresses which uses
the 'xx:xx:xx:xx:xx:xx' format.
However on some boards, the MAC addresses are stored
in different format in the mtd partition. Some vendors
are using hyphens or dots as separators instead of
colons. Also the leading zeroes may be missing from the
individual octets or those are replaced with spaces.
Add a new function which can be used to convert these
into the 'xx:xx:xx:xx:xx:xx' format. Also update the
'mtd_get_mac_ascii' function to use the new helper.
The helper function is based on this code:
http://isquared.nl/blog/2010/08/11/Bash-function-to-canonicalize-MAC-addresses/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38803 3c298f89-4303-0410-b956-a3cf2f4a3e73
This was copied from wireless-regdb.git commit a14052b85e5d70e37a31962a9c56c0cdbb9acafc
The passive-scan/no-ibss flag of channels 36-48 in the world regd were
removed like it was done in r32126.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38797 3c298f89-4303-0410-b956-a3cf2f4a3e73
swapon/swapoff are no longer provided by swap-utils; they are provided
by block-mount instead.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38795 3c298f89-4303-0410-b956-a3cf2f4a3e73
this includes the first wip version of the uci validation backend
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38786 3c298f89-4303-0410-b956-a3cf2f4a3e73
- enable building uboot for imx23 along sbImage by default
- (doc updated)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38781 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fixes failsafe issues with switches after r38725.
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38770 3c298f89-4303-0410-b956-a3cf2f4a3e73
'nas' requires probe of 'wds' devices to be successful;
so don't fail them.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38763 3c298f89-4303-0410-b956-a3cf2f4a3e73
When enabling multiple VIFS, the driver sometimes crashes. The frequency
of the crash increases as more VIFS are enabled.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38762 3c298f89-4303-0410-b956-a3cf2f4a3e73
Read the number of virtual interfaces to support from the device
capabilities; as some newer devices can support up to 16.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38759 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some devices initialize with a default address (common to all H/W).
The address needs to be changeable so that a unique address can be
assigned to each AP.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38757 3c298f89-4303-0410-b956-a3cf2f4a3e73
Default gmode to "GOnly" unless explicitly overwridden. This corrects
processing for 11ng to specify "GOnly" for gmode instead of "Auto"
(which translated to "bg").
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38754 3c298f89-4303-0410-b956-a3cf2f4a3e73
'nas' must be shutdown independently for each 'wl' device to properly
support devices with multiple radios. Do the shutdown when the device
is disabled instead of when it is brought up.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38753 3c298f89-4303-0410-b956-a3cf2f4a3e73
A single instance of 'nas' can support multiple interfaces; there's
no need to run multiple instances.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38752 3c298f89-4303-0410-b956-a3cf2f4a3e73
Modify the band reporting for broadcom devices to correctly report
HW capability. Currently, 802.11na devices report "bgn"; but should be
reporting "an".
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38749 3c298f89-4303-0410-b956-a3cf2f4a3e73
'netifd' treats all devices with a "." in their name as vlan devices.
Modify the name of virtual/WDS interfaces created by broadcom-wl to use
a "-" instead of a ".", so they will be treated as simple devices
by 'netifd'.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38748 3c298f89-4303-0410-b956-a3cf2f4a3e73
Delete the return value (nvram_exit is declared with a 'void' return).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38747 3c298f89-4303-0410-b956-a3cf2f4a3e73
The associations list for Broadcom WDS interfaces are duplicate to those
reported by the corresponding AP interface; so there is no need to report
them again.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38746 3c298f89-4303-0410-b956-a3cf2f4a3e73
Modify the hwmodelist reporting for broadcom devices to include
proper reporting of 802.11n support.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38745 3c298f89-4303-0410-b956-a3cf2f4a3e73
Felix Fietkau
Imre Kaloz
Luka Perkov
Jo-Philipp Wich
John Crispin
Steven Barth
Hauke Mehrtens
Zoltan HERPAI
Gabor Juhos