6079393d55
ar71xx: remove linux 3.8
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:12 +00:00
aad55d92d6
ar71xx: move the watchdog driver to the kernel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:08 +00:00
215f8e9d8e
ar71xx: set linux 3.10 as default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:04 +00:00
d631e85a63
brcm47xx: add initial support for kernel 3.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:44:45 +00:00
652844194b
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:19:58 +00:00
5c482f63ea
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:10:22 +00:00
5b1af986f6
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
fe0b737198
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:57:03 +00:00
4ea1473546
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:58 +00:00
6859bb2428
brcm47xx: do not change nvram without user interaction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:42 +00:00
cd7c8bbe3d
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:30:31 +00:00
8ad163f6f5
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:28:37 +00:00
6d0a2d148e
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:26:35 +00:00
7ed2d05b94
busybox: disable features marked as broken ( #13782 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:00:59 +00:00
8dfaf53e4d
kernel: refresh patches for kernel 3.8.13
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:56 +00:00
6390b285e9
kernel: update to kernel 3.10.1 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:09 +00:00
460f420734
kernel: update to kernel 3.9.10 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:43:10 +00:00
f78f7471c9
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:29:53 +00:00
5791ea36fd
brcm47xx: proc gets mounted without this patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 21:42:19 +00:00
14e7f6fd43
brcm47xx: remove obsolete hotplug stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 20:38:33 +00:00
c97fd7bf11
mac80211: tweak mac address allocation
...
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 11:39:48 +00:00
21201be1f4
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 13:46:27 +00:00
089d2c0e73
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 08:10:19 +00:00
5699aaac85
mac80211: merge a fix for PS-Poll handling, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 07:59:59 +00:00
1d38268af4
mac80211: remove bogus module params from compat.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 07:59:51 +00:00
0f44966ec8
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:53 +00:00
22369289cd
procd: update to latest git revision
...
this fixes a regression in the watchdog init code
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:43 +00:00
1eff8c3206
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:34 +00:00
7faed562d8
procd: make the log port default to 514 if none is specified
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:25 +00:00
1113ffd879
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:30 +00:00
79d759c52e
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:27 +00:00
ed61aa230e
kernel: make libsas depend on x86
...
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:22 +00:00
568ed0a9f3
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:19 +00:00
c4625f0383
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37252 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:15 +00:00
584f6dfd7c
ar71xx: set priority of ath79_wdt to 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37251 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:01:08 +00:00
b4e370a224
procd: update to latest git version
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:01:03 +00:00
c7b8d25ee0
procd: add proto and trigger support to the /etc/init.d/log
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:59 +00:00
ee1b454b4b
procd: add a small script that handles config reloads until configd is ready
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:54 +00:00
d20dabe8e8
procd: the delete ubus call was passed the wrong field name for services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:49 +00:00
2594841690
ubox: upgrade to latest version
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:45 +00:00
9af7d06947
dropbear: register a config.change trigger
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:40 +00:00
ebc1e02230
base-files: convert sysntpd init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:35 +00:00
55bf8ea96a
busybox: convert crond init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:30 +00:00
449861c4af
busybox: convert telnet init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:26 +00:00
79c725192b
base-files: run readlink on initscript name before opening services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:21 +00:00
db68332793
base-file: usbfs is no longer mounted under /proc/bus/usb
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 17:00:17 +00:00
557954455b
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 21:28:34 +00:00
9e94c1b6b0
brcm2708: drop support for 3.3 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:11 +00:00
255edebff6
brcm2708: package the i2c master driver module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:07 +00:00
9c138f1cf4
brcm2708: package the SPI master controller driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-10 19:43:02 +00:00
Felix Fietkau
Hauke Mehrtens
John Crispin
Florian Fainelli