9ccaa113ab
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 19:53:11 +00:00
f3524e5d5c
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 18:15:38 +00:00
6d82dac68c
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
...
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992 .
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 12:58:01 +00:00
2acfd7ff0d
x86_64: add description, maintainership
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 12:17:39 +00:00
bdf3aed117
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 07:36:17 +00:00
22c2544ec4
imx: add initial version of 3.18 support
...
This is build tested only.
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 05:48:56 +00:00
8c8ce63d33
kernel: add few missing symbols
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:50:16 +00:00
2382a25cfc
kernel: add symbol
...
Several targets are not using EMAC_ROCKCHIP so define it in generic config.
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:43:59 +00:00
2d9f8febf2
x86: add myself as maintainer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:32:15 +00:00
795063e4bd
x86: make x86_64 a subtarget instead of a standalone target
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:32:01 +00:00
a12f75fc15
x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:31:35 +00:00
39d3717ce3
kernel: fix linux/spi/spidev.h portability issues with musl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:28:24 +00:00
0807e2cc20
kernel: clean up fq_codel default patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-29 04:28:02 +00:00
10cbf87e76
adm8668: switch to 3.18
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 18:18:50 +00:00
cdcb00cdde
adm8668: add 3.18 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 18:18:38 +00:00
5dbf2d51cd
kernel: refresh 3.18 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 18:17:46 +00:00
0af24edcef
arm64: update to linux 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 13:38:52 +00:00
f01fd8e50b
brcm63xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 13:21:09 +00:00
35996331c3
mxs: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 13:21:04 +00:00
1aba8fdbbb
rb532: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 13:20:58 +00:00
29491411cd
uml: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 13:20:52 +00:00
0f6b70764a
x86: remove the olpc subtarget, it has been unmaintained for a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 11:37:08 +00:00
bf7383c87c
iop32x: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 10:44:55 +00:00
6f4b14d1c7
cobalt: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 10:44:49 +00:00
81de7a1461
sibyte: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 10:44:44 +00:00
787ae50e41
sparc: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 10:44:37 +00:00
d771094a7f
cns21xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-28 10:44:31 +00:00
7eab9787ed
rb532: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 21:22:22 +00:00
85708af23c
rb532: align partitions to 128KB
...
because block2mtd wants "erasesize must be a divisor of device size" since 3.15
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 21:22:17 +00:00
3d33be9ac4
rb532: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 21:22:10 +00:00
1c61d7a279
lantiq: remove arphaned folder
...
the new buildbot was picking this up as a valid target.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 19:47:22 +00:00
31494a4924
ralink: mt7621 add ECHI OCHI XCHI support
...
Lets hope that this time it won't break the other ralink targets.
Signed-off-by: wengbj <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 19:07:29 +00:00
06e722b91f
gemini: fix usb driver compilation on 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 16:03:16 +00:00
e2236e3f0d
mxs: update dtb path in image Makefile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 02:35:11 +00:00
0153bff154
ar71xx: add missing id for WNR2000v3 image ( fixes #18959 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-27 00:35:34 +00:00
be4699503c
mxs: bump to 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 23:35:50 +00:00
c3a60d5114
mxs: add sdcard image builder
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 23:34:43 +00:00
d82b57a74f
mxs: enable uboot-mxs-duckbill build for duckbill profile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 23:04:27 +00:00
0628c8046b
generic: drop old kirkwood mach types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 22:48:31 +00:00
8fa0e32396
mxs: add 3.18 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 22:18:47 +00:00
83edad4a85
gemini: make dd commands more portable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:37:19 +00:00
9515165e03
gemini: switch mantainer to myself
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:37:09 +00:00
5c75df03ca
gemini: nuke 3.10 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:36:59 +00:00
f198a663e8
gemini: remove broken flag
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:36:49 +00:00
4518204955
gemini: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:36:40 +00:00
9c6ee3fd3b
gemini: don't build jffs2 image for Raidsonic board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:36:35 +00:00
b83cc973ce
gemini: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 20:36:30 +00:00
f994693546
xburst: Update to 3.18
...
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 19:46:01 +00:00
ef1773c07c
ar71xx: fix image size checks for WNDR3700
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 18:50:44 +00:00
8a1580f9f7
ralink: drop xhci patch, it break !mt7621 builds
...
will re-add it tomorrow after fixing it
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 16:24:19 +00:00
5a01d51ecb
ralink: the xhci patch broke ehci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 14:49:26 +00:00
537243251b
mvebu: fixup usb3 support on the a38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 14:32:45 +00:00
31c9d90914
generic/4.0: upgrade to 4.0-rc5
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45025 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 14:06:42 +00:00
49fdd78bb1
mvebu: add a coherency fix which didn't make it to -stable, yet
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45024 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 13:52:21 +00:00
53ddd31f45
ralink: add default pinctrl node for mt7621 eval kit
...
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 12:23:02 +00:00
4e105f4aea
ralink: mt7621 add ECHI OCHI XCHI support
...
The usb stroage not working since updated 3.18. Porting from MTK's source code.
Signed-off-by: wengbj <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:51 +00:00
5422bf412d
ralink: add FireWRT power button
...
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:36 +00:00
7e260b50f6
ralink: MT7621 add i2c controller driver
...
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:31 +00:00
d3d23a9f7b
kernel: add missing symbol
...
Signed-off-by: John Szakmeister <john@szakmeister.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:24 +00:00
0cce61e911
x86: add missing symbol to xen_domu
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:59:10 +00:00
d501aa20ff
cobalt: enable bridge
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:59 +00:00
2c93d1ab3d
kernel: extend seccomp with a LOG action
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:58:03 +00:00
b2188a6377
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 10:42:36 +00:00
b22936646d
drop 3.19 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-26 09:42:59 +00:00
99afb68ef8
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:14 +00:00
a0f15a194b
ar71xx/image: add tplink device template for new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:10 +00:00
0b22d57e91
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
...
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:58:05 +00:00
53aabb0a46
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 17:57:44 +00:00
992c140f96
brcm63xx: use a lookup for bcmcia's ready gpio
...
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:37:38 +00:00
143ebec33f
brcm63xx: fix bcm96328avng board name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:26 +00:00
5e2e830a49
brcm63xx: fix bt v2500v dts based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:15 +00:00
e6a628a95c
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:12 +00:00
d8c4cc64ba
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:36:05 +00:00
d12962e510
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:57 +00:00
a83d3cc6b3
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:43 +00:00
910fe9678c
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:37 +00:00
a0c7ba2eae
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:24 +00:00
0e09023c5f
brcm63xx: fix compilation on 3.14
...
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:15 +00:00
5f59daeb04
brcm63xx: Add BT Home Hub 2A support.
...
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:35:12 +00:00
1e7bcd00a9
brcm63xx: move kernel load address to 8MiB
...
Fixes boot when uncompressed kernel is > 4 MiB (#19251 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:59 +00:00
ed7bef4f55
brcm63xx: hcsimage: respect load address
...
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:45 +00:00
3bc36b563e
brcm63xx: add Livebox 1 firmware image generation
...
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:40 +00:00
59c9cec787
brcm63xx: add a dummy image recipe for boards missing proper images
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:26 +00:00
2082201b9c
brcm63xx: drop non-dtb image recipe
...
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 15:34:23 +00:00
e11b30a987
kernel: merge upstream bgmac driver improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:30:46 +00:00
a325d7259e
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 14:30:40 +00:00
b3a7fffcb0
kernel: yaffs: use new_sync_{read,write} for 3.18+
...
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:
root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
[ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 2884.120000] yaffs: passed flags ""
root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
[ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
address 00000000, epc == 00000000, ra == 80129414
[ 2902.710000] Oops[#1 ]:
[ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
[ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
[ 2902.710000] $ 0 : 00000000 fffffff8 00000000 00000000
[ 2902.710000] $ 4 : 868c7e70 868c7ea8 00000001 868c7f08
[ 2902.710000] $ 8 : 00000038 80064f18 80072280 00000000
[ 2902.710000] $12 : 7fa152b8 7709e3a0 00c42008 7709e3a0
[ 2902.710000] $16 : 868c7f08 86a46000 00000010 878e7a20
[ 2902.710000] $20 : 7705c4b0 00000010 00000000 00000000
[ 2902.710000] $24 : 770960bc 7707dd78
[ 2902.710000] $28 : 868c6000 868c7e58 7f8e7030 80129414
[ 2902.710000] Hi : 00000000
[ 2902.710000] Lo : ffffffff
[ 2902.710000] epc : 00000000 (null)
[ 2902.710000] Not tainted
[ 2902.710000] ra : 80129414 do_sync_read+0x7c/0xb4
[ 2902.710000] Status: 1900dc03 KERNEL EXL IE
[ 2902.710000] Cause : 00800008
[ 2902.710000] BadVA : 00000000
[ 2902.710000] PrId : 00019750 (MIPS 74Kc)
Change the yaffs code to use the new_sync_{read,write} functions
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-25 08:59:12 +00:00
50224b5f7c
kernel: backport rest of bcma patches
...
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:39:10 +00:00
aeadcc4f9d
kernel: mac80211: backport bcma patch renaming IRQ control function
...
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:38:59 +00:00
c9f274fad3
mark 3.10 targets as broken
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:38:50 +00:00
463bc01f6d
x86: use PARTUUID instead explicitly specifying the device by default
...
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.
It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.
Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:08:12 +00:00
658472564b
build: remove obsolete references to cris and avr32
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:07:40 +00:00
7c11754589
x86_64: fix PARTUUID format with leading zeros
...
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:06:40 +00:00
f9be8880e7
avr32: remove target
...
It depends on obsolete compilers and only works on one device (an
evaluation board).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 10:06:14 +00:00
e1925a880e
kernel: update bcma with most patches from wireless-drivers-next
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-24 07:15:31 +00:00
ea2ec11ec3
kernel: backport fixed_phy_register EXPORT fix from 3.19
...
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-23 18:39:16 +00:00
f63e9c8fc9
generic/3.18: refresh patches
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-23 13:28:52 +00:00
9dcf88d0d5
mvebu: update mamba dts
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-23 12:44:30 +00:00
5064bb35c1
bcm53xx: add missing cache controller errata options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-23 10:14:27 +00:00
a415534bf4
bcm53xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-23 10:14:20 +00:00
1645c84c49
ramips: make ethernet register map u16 instead of u32
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 15:11:14 +00:00
4b5af7dfa9
bcm53xx: add SMP support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 15:07:40 +00:00
318daf0f81
uml: bump to 3.18
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 12:36:57 +00:00
a0c040c5e5
au1000: drop 005-fix-cpu-clk.patch
...
it has been upstreamed and treackled down with the latest 3.18 update
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 07:03:02 +00:00
c8dc94b365
bcm53xx: add support for Asus RT-AC68U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 01:57:15 +00:00
4193282ee9
bcm53xx: fix Asus RT-AC87U magic (even if not used yet)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 01:57:10 +00:00
53117a6c7d
bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 01:57:06 +00:00
dbd0ee9733
bcm53xx: refresh patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-22 01:56:47 +00:00
6a44e4ebac
oxnas: remove pre kernel 3.18 support from pinctrl driver
...
just some pruning...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 21:47:20 +00:00
d4a4c0aefc
oxnas: add support for kernel 4.0
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 21:47:03 +00:00
ca37f8bd11
kernel: add two more missing config symbols
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 21:46:47 +00:00
a61c79114d
brcm2708: remove a patch that was added in the stable update ( fixes #19253 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 21:24:08 +00:00
7b1f9665a3
ramips: increase NAPI weight for mt7621 to improve routing performance a bit more
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 12:08:07 +00:00
def8e2e478
kernel: backport bgmac patches
...
This allows dropping some hacky bcm53xx bgmac patch forcing link state.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 11:45:50 +00:00
74d43a8381
bcm53xx: enable FIXED_PHY, we will need it for bgmac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-21 11:45:27 +00:00
13954e1857
kernel: fix ipsec related regression in the netfilter rtcache patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-20 22:13:34 +00:00
124ba26fbe
mvebu: set default regdomain
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-20 12:15:40 +00:00
8685482158
ramips: fix LAN/WAN MAC address for WSR-600/1166
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-20 09:37:07 +00:00
5ca24d776a
octeon: add er8 sysupgrade support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-20 08:49:08 +00:00
22417246f0
octeon: Add MMC support for EdgeRouter ER8
...
this is a backport of a series posted on the lmo mailing list
Signed-off-by: Jonathan Thibault <jonathan@navigue.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-20 08:49:02 +00:00
e6ad8a72f8
ramips: fix WSR-1166 green power LED
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 21:51:44 +00:00
f5e4894264
omap24xx: Add basic config for linux-4.0
...
Also remove 3.3 config. It's broken and unsupported.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 18:45:32 +00:00
a1e390d52a
ipv6: fix throw routes
...
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 15:46:03 +00:00
3ab6563711
kernel: remove linux 3.8 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:59 +00:00
d121ed26a1
ep93xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:54 +00:00
9f03e29f88
mpc52xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:48 +00:00
2e6497cb44
mpc83xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:43 +00:00
db9f54d0e4
ar71xx: fix a double dereference in the unaligned access patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:30 +00:00
63abff6059
x86_64: remove unused patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 11:58:22 +00:00
ecc294e76c
mvebu: add Linux 4.0 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 10:25:44 +00:00
48ac279159
generic/4.0: fix ubi EOF marker patch
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 10:13:21 +00:00
1f5eba6f33
generic/4.0: add missing symbols
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-19 10:11:20 +00:00
1eb74d2c55
kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-18 18:22:41 +00:00
5d4be21553
kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4
...
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-18 18:21:08 +00:00
5abe49b74e
b53: reverse duplex bit meaning for IMP state override register
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-18 10:44:15 +00:00
4c70421219
kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 17:14:48 +00:00
469956f441
ralink: fix mt7621 i2c name
...
Signed-off-by: zouxf <fl.service@t-firefly.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:44:14 +00:00
4bae2b846e
lantiq/xrx200: cleanup default packages
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:44:06 +00:00
45c00f9884
ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44866 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:43:56 +00:00
586c7dc4be
ar71xx: enable sysupgrade for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:43:37 +00:00
195508354e
ar71xx: add user-space support for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:43:31 +00:00
2f69dbc669
ar71xx: add kernel support for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44861 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:43:19 +00:00
efedd48f33
ar71xx: detect GL.iNet model
...
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:43:13 +00:00
ebf027fd03
lantiq: make xrx200 targets use the upstream dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44857 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 09:42:56 +00:00
0c99ee5ca2
kernel: add a few more missing config symbols
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 07:24:51 +00:00
d64e00f9a9
brcm47xx: support SPROM/NVRAM prefixes
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 07:07:17 +00:00
4855417993
brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-17 07:07:00 +00:00
faad28c2e5
brcm47xx: switch to 3.18
...
Tested on BCM5357B0, BCM47186B0 and BCM4706.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 23:05:43 +00:00
7c068fdf9d
bcm53xx: switch to 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 22:24:56 +00:00
2a51616fe9
x86: refresh kvm_guest kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 21:17:45 +00:00
c44536a9c3
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 21:17:41 +00:00
ce244bfdcb
x86: enable rtl8139 ethernet support for geode by default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 21:00:14 +00:00
db93430e41
brcm63xx: switch maintainer
...
Make Jonas the maintainer of brcm63xx.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 19:51:17 +00:00
3a9edc87a1
geode: set target to Geode GX1 to support older chips
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 18:10:17 +00:00
ad99d83746
brcm63xx: use consistent gpio chip labeling for OF/non-OF
...
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 13:37:38 +00:00
36da43e2de
brcm63xx: switch to 3.18
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:53:22 +00:00
9639282138
brcm63xx: call brcm63xx_detect explicitly
...
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:53:14 +00:00
4c68a5c6d0
brcm63xx: move preinit ifname detection to the preinit script
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:53:06 +00:00
00f2dabeb0
brcm63xx: remove obsolete brcm63xx_has_reset_button
...
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:57 +00:00
2a827e0a3c
brcm63xx: set status leds from within diag.sh
...
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:49 +00:00
23f14889e7
brcm63xx: switch to board_name based configuration
...
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:42 +00:00
6b0ccff588
brcm63xx: add missing board_ids to legacy_detect
...
These boards do not have a corresponding dts file yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:35 +00:00
2540aee55b
brcm63xx: add device tree based board detection
...
Use the device tree model property for detecting the board instead
of board id from nvram if present.
Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:26 +00:00
3f64e1384f
brcm63xx: populate /tmp/sysinfo
...
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:20 +00:00
e3c5eb138f
brcm63xx: base-files: rename board_name to board_id
...
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:16 +00:00
83842af347
brcm63xx: Add DGND3700 v1 / DGND3800B support
...
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 11:52:10 +00:00
ba25eac519
netlogic: bump to 3.18
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 10:58:43 +00:00
145e6b9231
mvebu: drop linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 08:29:42 +00:00
d7d8a76a74
kernel: add missing MTD_SPLIT_FIT_FW symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 08:05:42 +00:00
b34d1f6b43
sunxi: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:41:24 +00:00
ad966e5eaa
adm5120: drop 3.8 and 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:41:19 +00:00
d84f47b85f
ar7: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:41:10 +00:00
2ab55b4a9a
ixp4xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:41:05 +00:00
bed4dc5199
octeon: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:59 +00:00
3642d7841a
oxnas: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:54 +00:00
7b9c4ca2bf
mpc85xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:47 +00:00
102d657c2a
cns3xxx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:41 +00:00
42d874818f
au1000: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:19 +00:00
63894eb6f7
ar71xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:09 +00:00
adc39a912a
realview: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:40:02 +00:00
afc19ce4e0
malta: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:39:57 +00:00
ed1a519c40
lantiq: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:39:52 +00:00
c59b0d680a
ralink: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:39:46 +00:00
7507c28720
x86: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:12:31 +00:00
eb03a1d7c2
x86: merge all geode based subtargets into one
...
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 07:05:30 +00:00
daf4534ed4
x86: remove 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:57:04 +00:00
171313998e
kernel: remove linux 3.13 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:52:02 +00:00
16a0753919
omap: remove old kernel versions
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:51:56 +00:00
0f4fe3ab01
omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:51:52 +00:00
3814bc9785
kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:16:14 +00:00
a4e5b7cde3
kernel: fix duplicate use of patch number 490
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 05:16:07 +00:00
2a5d72c686
kernel: add a few missing config symbols for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 04:47:28 +00:00
0349445009
kernel: add missing description for GRO optimization patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-16 04:19:09 +00:00
0e879af4ad
kernel: skip GRO for packets bridged to other hosts
...
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 20:32:09 +00:00
645862c1c8
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
...
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 19:39:47 +00:00
db328d1e26
ipq806x: fix AP148 boot from NOR
...
This patch allows AP148 to boot from NOR flash.
As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).
The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 19:39:41 +00:00
a325ed5979
ipq806x: add ap148 bootargs to DT
...
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 19:39:33 +00:00
02f1a53164
kernel: mtdsplit: add support for FIT image
...
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 19:39:27 +00:00
596033a52e
Fix (invert/revert) Hornet-UB WPS LED state
...
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.
The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 19:25:48 +00:00
309b8df125
b53: global config is part of the management page, not the control page
...
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.
Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-03-15 14:19:28 +00:00
Rafał Miłecki
John Crispin
Imre Kaloz
Felix Fietkau
Luka Perkov
Florian Fainelli
Zoltan HERPAI
Lars-Peter Clausen
Jonas Gorski
Gabor Juhos
Jo-Philipp Wich
Nicolas Thill
Michael Büsch
Steven Barth