Commit Graph

7845 Commits (ab08c44cc9af6d7d4afd327765394c2c7cec1ca6)

Author SHA1 Message Date
Gabor Juhos 356abe23cf ramips: fix a section mismatch warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:46 +00:00
Gabor Juhos e324614143 ramips: remove unused include from the common GPIO code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:44 +00:00
Gabor Juhos 25af94c585 ramips: disable watchdog on sysupgrade
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:43 +00:00
Gabor Juhos 9c99259af6 ramips: swap target check in image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:42 +00:00
Gabor Juhos 0e8f2c6cc6 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:41 +00:00
Gabor Juhos 46cc717148 ramips: set cp0_perfcount_irq for RT305X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:01:40 +00:00
Daniel Dickinson 8a6ddb7ebf [x86] target/patches: This has been sent upstream, but might not appear for a couple of weeks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27373 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:20:04 +00:00
Daniel Dickinson 90f49c4e72 [x86] target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:53 +00:00
Daniel Dickinson 1e6c89025a [x86] Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:51 +00:00
Daniel Dickinson a661e5a1a8 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 03:14:48 +00:00
Daniel Dickinson fcee088c70 The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 02:59:00 +00:00
Gabor Juhos b56e4c784a ar71xx: use 4k image only for the AP121 board
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 08:37:59 +00:00
Imre Kaloz 60e1ac985f [cns21xx]: cns21xx belongs to the Econa family, too
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 08:31:25 +00:00
Imre Kaloz 4be0dd3b96 [etrax]: mark it broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-02 07:26:04 +00:00
Jo-Philipp Wich 5b13d0ebc8 [ar71xx] revert r27043 (#9513)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich dea51bb2f8 [ar71xx] revert r27341, it introduce wrong behaviour for other models
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 08a25a3b26 [ar71xx] turn status LED off if device finished initializing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 18:39:53 +00:00
Imre Kaloz 4499d09000 [avr32]: upgrade avr32 u-boot to 2011.06
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 11:32:01 +00:00
Imre Kaloz 362b3e2231 [avr32]: upgrade to 2.6.39.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 11:31:08 +00:00
Imre Kaloz 728809f04b [cns3xxx]: preliminary 3.0 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 08:15:48 +00:00
Imre Kaloz 0025637591 [target/generic/3.0]: add missing kernel symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 08:11:16 +00:00
Felix Fietkau efea8a29c9 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-01 03:20:13 +00:00
Gabor Juhos 2e69406167 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code
The config option has been removed in 2.6.39.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-30 12:15:33 +00:00
Hauke Mehrtens dcd4203ae6 brcm47xx: deactivate wndr3400 for now as this device will not boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 17:42:34 +00:00
Gabor Juhos 5af777bdf1 ar71xx: merge 2.6.39 patches
Also remove the old UART driver for ar933x.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:37 +00:00
Gabor Juhos ba7d104b8a ar71xx: remove 2.6.37 support as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:36 +00:00
Gabor Juhos e3ddb93897 ar71xx: remove 2.6.38 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:34 +00:00
Gabor Juhos 66550a7032 ar71xx: switch to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:33 +00:00
Gabor Juhos f15a427a56 ar71xx: add 2.6.39 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:32 +00:00
Gabor Juhos 40dfb136e7 ar71xx: remove ar71xx_gpio_irq_set_type
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:30 +00:00
Gabor Juhos 551199f23d ar71xx: add separate handlers for IP3 interrupts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:29 +00:00
Gabor Juhos 7253ea2cf7 ar71xx: use separate handlers for IP2 interrupts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:28 +00:00
Gabor Juhos 4ef13c03c0 ar71xx: remove useless irq_desc.status initializations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:27 +00:00
Gabor Juhos 2d2fa7b6ed generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-29 08:57:25 +00:00
Hauke Mehrtens 029d55e761 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 22:23:21 +00:00
Hauke Mehrtens bf2c750b45 brcm47xx: add initial support for devices with bcma bus.
Ethernet and wifi are not working and this is highly experimental.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 22:21:57 +00:00
Hauke Mehrtens b1e50c66ea kernel: refresh patches for kernel 3.0-rc5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 20:25:39 +00:00
Hauke Mehrtens 9920424969 kernel: update ssb and bcma to linux-next next-20110628
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 19:33:50 +00:00
Hauke Mehrtens 210af3e57c kernel: update kernel to 2.6.39.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 19:30:58 +00:00
Imre Kaloz fe98667990 [cns3xxx]: ethernet cleanup and sata fix - thanks, Chris
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-28 06:54:20 +00:00
Hauke Mehrtens ca52517f61 brcm47xx: update kernel to version 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 21:29:20 +00:00
Hauke Mehrtens b5051f91ff kernel: update ssb and bcma to linux-next next-20110627
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 21:28:40 +00:00
Hauke Mehrtens c866064533 brcm47xx: fix Linux-3.0 and fix clock rate detection.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 20:20:11 +00:00
Hauke Mehrtens 3656bcaeb2 kernel: update ssb and bcma to linux-next next-20110627
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 20:18:49 +00:00
Jo-Philipp Wich 9f22101e62 [geos] remove remaining uci-defaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-27 01:42:31 +00:00
Florian Fainelli 7df7c99364 [x86] geos: deprecate uci-defaults files
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:10 +00:00
Florian Fainelli af4c306ce6 [x86] alix2: add config files for bridging
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 22:05:05 +00:00
Florian Fainelli fa61065873 [brcm63xx] remove gpiodev, prefer sysfs gpio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 19:26:17 +00:00
Felix Fietkau 42b46dbbd5 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:54:42 +00:00
Felix Fietkau 1ce73d5bde ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-25 13:48:47 +00:00
Florian Fainelli 3958942342 [kernel] add missing linux-3.0 config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-24 11:43:30 +00:00
Florian Fainelli d72a90ee7b [brcm63xx] register SSB sprom after ethernet devices
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-22 12:32:03 +00:00
Florian Fainelli 16a2b890cf [brcm63xx] fix tab damage in 141-led_count.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:58 +00:00
Florian Fainelli a104f95d05 [kernel] fix and make usable kmod-pcmcia-rsrc
This module is also needed for e.g: kmod-bcm63xx-pcmcia

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 20:52:53 +00:00
Hauke Mehrtens ef4775df74 kernel: refresh patches for kernel 3.0-rc4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 18:39:47 +00:00
Florian Fainelli 46c6ee1ca7 [brcm63xx] use macros to generate SPI registers table and switches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21 10:05:51 +00:00
Florian Fainelli 585c56bd1a [adm5120] fix usb mis-cleanup after r27162 (#9581)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-20 10:04:53 +00:00
Jo-Philipp Wich 545cdca68e [x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 23:05:21 +00:00
Jo-Philipp Wich 6f3abd061e [PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).

The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 22:48:53 +00:00
Florian Fainelli d2e81efd80 [brcm63xx] dev-spi.c checks for running CPU, not board code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:46:00 +00:00
Florian Fainelli 35faebfc51 [brcm63xx] fixup patches after r27234
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:28:38 +00:00
Florian Fainelli 333e68fdfd [brcm63xx] remove accidental bcm6345 related patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:16:59 +00:00
Florian Fainelli f41477ce57 [brcm63xx] remove support for 2.6.37 and 2.6.38
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:14:22 +00:00
Florian Fainelli 0103e97008 [brcm63xx] switch to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:12:45 +00:00
Florian Fainelli d55db8855e [cobalt] remove 2.6.35 and 2.6.32 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:40 +00:00
Florian Fainelli 4a130bc193 [ep93xx] remove pre 2.6.39 patches and config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:09:00 +00:00
Florian Fainelli a057bc3de3 [au1000] remove 2.6.37 patches and config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 20:07:26 +00:00
Gabor Juhos 191ba94ca2 ar71xx: cleanup AR933X UART driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:51 +00:00
Gabor Juhos 3436ce6c87 ar71xx: fix uart clock frequency for AR933X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-19 13:17:50 +00:00
Hauke Mehrtens 8382dd4891 brcm47xx: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:53:14 +00:00
Hauke Mehrtens 791f4d23e2 kernel: update to kernel 2.6.38.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:52:15 +00:00
Hauke Mehrtens cbd8113c9f brcm47xx: add support for kernel 3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-18 15:24:44 +00:00
Rod Whitby cc68b18430 ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-17 11:22:22 +00:00
Florian Fainelli 6808613101 [kernel] add missing USBIP_CORE item in config-3.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:50 +00:00
Florian Fainelli 5102806324 [malta] allow any console to be used
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:44 +00:00
Florian Fainelli ab7d434b54 bcm63xx: Add support for Linux 3.0-rc3
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 14:34:40 +00:00
Hauke Mehrtens a3c7fb6d39 linux/generic: Add support for 3.0-rc3
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 21:31:01 +00:00
Hauke Mehrtens 45622e7d60 bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 21:11:49 +00:00
Jo-Philipp Wich d26464abb6 [PATCH] 2.6.39.1: missing kernel symbols
If you turn on I2C, you'll need this symbol defined.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27182 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 18:18:32 +00:00
Felix Fietkau 5b8400b5d9 add missing kernel config symbols for usb on powerpc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 18:07:26 +00:00
Jo-Philipp Wich 4a25af3b0d [generic] backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 14:11:33 +00:00
Jo-Philipp Wich 24551f6d23 [generic] revert r26997, it does not apply against 2.6.36.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-15 13:51:57 +00:00
Florian Fainelli 52500996fc [cobalt] switch to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:13 +00:00
Florian Fainelli e044b85889 [cobalt] fix diag.sh with qube2 front led
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:09 +00:00
Florian Fainelli 0fb925e78a [cobalt] resync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-14 20:05:03 +00:00
John Crispin 2ad9f05361 [lantiq]
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 22:37:23 +00:00
Florian Fainelli 86b69cccdc [uml] replace unfortify patch with a better one
Thanks to Richard Weinberger for providing this patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 12:45:12 +00:00
Gabor Juhos ebf969e6ef ar71xx: use ar933x_uart.h in the AR933X serial driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 08:12:40 +00:00
Gabor Juhos f6d3520a90 ar71xx: update early_printk code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13 08:12:38 +00:00
Florian Fainelli 3d41f1652c [adm5120] cleanup files using checkpatch.pl
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12 19:17:57 +00:00
John Crispin e71f7633f7 [lantiq]
* move patches around
* add basic support for gigaset sx76x


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis 5bc0fb0253 [ar71xx] Remove trailing spaces, convert spaces to tabs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 19:30:50 +00:00
John Crispin 4d115d3804 [ledtrig-netdev]
we dont need 1024 bytes buffer. 128  bytes is enough.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 07:08:54 +00:00
John Crispin fe5712255b [atheros]
* revert accidental config change


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-09 05:10:18 +00:00
John Crispin e558a1dec9 [lantiq]
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-08 17:57:55 +00:00
Felix Fietkau a7be639630 ar71xx: override inittab to enable login on ttyATH0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 17:07:10 +00:00
Florian Fainelli 706c2323f0 [ep93xx] update to 2.6.39.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:14 +00:00
Florian Fainelli 074247f869 [ep93xx] define UIMAGE for various rootfs targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:09 +00:00
Florian Fainelli 8538c5d738 [ep93xx] use IMG_PREFIX for image name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:04 +00:00
Florian Fainelli 9378a9a8b4 [kernel] add more config symbols to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:27:00 +00:00
Florian Fainelli 525ed5fc52 [uml] update to 2.6.39.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 18:26:54 +00:00
Florian Fainelli fbba97cc8b [realview] update to 2.6.39.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:09 +00:00
Florian Fainelli e8ff7031dd [malta] update to 2.6.39.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:05 +00:00
Florian Fainelli 9a1730ac41 [kernel] add some missing 2.6.39 config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:36:00 +00:00
Florian Fainelli c8baad652d [kernel] update to 2.6.39.1
patch from Peter Wagner

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 13:35:55 +00:00
Gabor Juhos 552f0d1870 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 12:30:10 +00:00
Gabor Juhos e21993eca6 ar71xx: select the internal antenna by default on the ZCN-1523H boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-04 12:30:09 +00:00
Florian Fainelli 1184342f70 [au1000] update to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-02 13:45:20 +00:00
Felix Fietkau 17d0d1aa06 Revert "ar71xx: only enable the rx engine after the link is up..."
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 18:15:43 +00:00
Gabor Juhos 83cac6285d ar71xx: init external_reset for AR933X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:30 +00:00
Gabor Juhos d2f1b74fdf ar71xx: add external_reset field to ath9k_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:28 +00:00
Gabor Juhos f3e2f1b8ba ar71xx: init get_mac_revision on AR9330 rev 1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:27 +00:00
Gabor Juhos fe2f4cd7cc ar71xx: add get_mac_revision to ath9k_platform_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:26 +00:00
Gabor Juhos c0f1df073d ar71xx: export SoC revision
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 13:12:24 +00:00
Imre Kaloz 6b89f2292c [cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 07:24:41 +00:00
Imre Kaloz a16a93621c [cns3xxx]: fixup second led, patch from Chris
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 07:21:25 +00:00
Felix Fietkau d45f8cb7f6 ar71xx: add profile and image building code for wzr-hp-ag300h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:30 +00:00
Felix Fietkau 7d86f5c169 ar71xx: add kernel support for the buffalo wzr-hp-ag300h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:26 +00:00
Felix Fietkau edb85626ef fix a crash in mtd_concat when the .sync op is not implemented
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:22 +00:00
Felix Fietkau d94e059402 m25p80: add the chip id for the winbond w25q128 chip
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 02:23:18 +00:00
Imre Kaloz e8d8f5778b [cns3xxx]: fixup pcie clock, thanks Chris
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 23:55:33 +00:00
Gabor Juhos 2ca6db7bcb ar71xx: build images for the AP121 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:47 +00:00
Gabor Juhos 5523ce3deb ar71xx: add sysupgrade support for the AP121 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:45 +00:00
Gabor Juhos 3714608bb3 ar71xx: add default network config for the AP121 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:44 +00:00
Gabor Juhos 627d352d70 ar71xx: add support for the AP121/AP121-MINI reference boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:43 +00:00
Gabor Juhos effd488adc ar71xx: register UART for the AR933X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:42 +00:00
Gabor Juhos f16e2742f4 ar71xx: add serial driver for the AR933X UART
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:40 +00:00
Gabor Juhos 57da5f9061 ar71xx: add WMAC initialization code for the AR933X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:39 +00:00
Gabor Juhos 431a42fc3b ar71xx: add ethernet initialization for the AR933X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:37 +00:00
Gabor Juhos 032e6e7374 ar71xx: enable USB support for the AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:36 +00:00
Gabor Juhos ec8c1d39e1 ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:35 +00:00
Gabor Juhos 9a2d89381e ar71xx: the watchdog uses the reference clock on the AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:34 +00:00
Gabor Juhos 2509e6a9dd ar71xx: add AR933x specific glue code for IRQ initialization
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:32 +00:00
Gabor Juhos 949c26dd15 ar71xx: don't register 8250 UART on the AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:31 +00:00
Gabor Juhos 9f519d000a ar71xx: enable GPIO support for the AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27057 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:30 +00:00
Gabor Juhos 63c4ff5ea4 ar71xx: add AR933x specific frequency initialization code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:29 +00:00
Gabor Juhos 8fa9bf2dd7 ar71xx: add AR933x specific early_printk support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:27 +00:00
Gabor Juhos 23388b4cd9 ar71xx: add preliminary support for the Atheros AR933x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:26 +00:00
Gabor Juhos 0518d27878 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:25 +00:00
Gabor Juhos e0d562138a ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:22 +00:00
Gabor Juhos 6f14177314 ar71xx: Fix header offset for newer WRT160NL models
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:20 +00:00
Gabor Juhos e7a7ee1db1 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27048 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:19 +00:00
Gabor Juhos 208eb6ab2e ar71xx: reduce the size of the squashfs-4k binaries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:18 +00:00
Gabor Juhos 3097d45727 ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:15 +00:00
Gabor Juhos a89ae2138b ar71xx: sync ath9k_platform_data.h with compat-wireless
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:14 +00:00
Gabor Juhos 8a367348f9 ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:13 +00:00
Gabor Juhos f6cccf1487 ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:12 +00:00
Gabor Juhos a45026d4cb ar71xx: ag71xx: make ring sizes configurable via ethtool
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:10 +00:00
Gabor Juhos 4d55ed1dc2 ar71xx: ag71xx: prepare to make ring sizes configurable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:09 +00:00
Gabor Juhos abc7b65d39 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:07 +00:00
Felix Fietkau e53d127fa4 x86: add additional companion chip drivers to alix2 and geos
Add the MFGPT high precision timers, and integration into the schedule (clock events).

Use OHCI, not UHCI usb module.

Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 16:57:05 +00:00
Felix Fietkau 5c83d117df x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 16:57:01 +00:00
Mirko Vogt 98395298e5 purge out CONFIG_CRYPTO* symbols out of target specific kernel configs
since OpenWrt is taking care of them

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 09:47:30 +00:00
Felix Fietkau 424bed8c19 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:08:01 +00:00
Felix Fietkau f3431736d5 ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:07:57 +00:00
Imre Kaloz 2815868d4a [cns3xxx]: upgrade to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 13:55:34 +00:00
John Crispin 9af744afe8 [lantiq]
* backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-29 21:19:26 +00:00
Florian Fainelli 8cdbf2c4b6 bcm63xx: Add support for 2.6.39
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:52 +00:00
Florian Fainelli 8dbfe7ca11 bcm63xx: Add support for 2.6.38
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-27 09:54:48 +00:00
Florian Fainelli e95dc4b5c1 [brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:53:00 +00:00
Florian Fainelli f1e6eb88e8 [brcm63xx] renumber patches accordingly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 13:52:56 +00:00
Florian Fainelli 9601ce7e1f [brcm63xx] renumber board patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-26 12:09:15 +00:00
Hauke Mehrtens c64a3e912a kernel: exportfs: reallow building as a module
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.

see: https://patchwork.kernel.org/patch/812832/

Thank you Jonas Gorski for the patch. 


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 20:57:13 +00:00
Hauke Mehrtens 7967debb9c kernel: generic: Update 2.6.39 to final
* Add missing config symbols
* Update package/kernel for 2.6.39

CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.

Thank you Jonas Gorski for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:51:40 +00:00
Hauke Mehrtens 22ca381be8 kernel: some updates for kernel 2.6.39
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile

Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:32:00 +00:00
Hauke Mehrtens 0dbe62a718 brcm47xx: initial 2.6.39 support for brcm47xx
Thank you Peter Wagner for the patch


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:27:08 +00:00
Florian Fainelli e15963161a [kernel] fix mtd warnings
Fixes for the following warnings:

drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type

In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 19:16:58 +00:00
Hauke Mehrtens 7cd58d14eb brcm47xx: remove old kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 18:05:54 +00:00
Hauke Mehrtens bee045c2a0 brcm47xx: fix partition layout on SimpleShare devices.
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-25 17:46:34 +00:00
Hamish Guthrie 5171c48102 [generic] Clean up patch not applying
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-24 10:00:36 +00:00
Florian Fainelli 195f49f69c [brcm63xx] add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:25 +00:00
Florian Fainelli c24a32df6f [brcm63xx] add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:22 +00:00
Florian Fainelli 4b5cddfaca [brcm63xx] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:18 +00:00
Florian Fainelli a6aa5507e7 [brcm63xx] add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:15 +00:00
Florian Fainelli a43c6cd743 [kernel] refresh 2.6.37 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:11 +00:00
Florian Fainelli 764614896e [brcm63xx] add support for BT Voyager 2500 (#9070)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:07 +00:00
Florian Fainelli 05bf83accb [brcm63xx] add support for USR9108 LEDs (#9372)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:04 +00:00
Florian Fainelli d4f8185d02 [ar7] add GT701 LEDs support (#9382)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 10:06:00 +00:00
Daniel Dickinson 09f509497a Simple typo for kmod- prefix in alix2 target makefile.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-19 04:29:40 +00:00
Hamish Guthrie 09e9c43c04 [omap35xx]: Remove override of max80211.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18 12:43:54 +00:00
Hamish Guthrie 994f5af4f0 [omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-18 11:50:36 +00:00
Matteo Croce a1ea2a188d ar71xx: don't probe the LAN PHY
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:15:24 +00:00
Matteo Croce c4c0ffb506 ar71xx: detect link on LAN ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:12:56 +00:00
John Crispin f7044753af [x86]
* adds support for Artec Thincan

Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 10:35:14 +00:00
Felix Fietkau 60972ff36c kernel: backport some ssb changes to support a mac80211 update
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-16 21:50:20 +00:00
Jo-Philipp Wich 2e938d5bb2 [generic] remove an accidentally copied comment from the option.ko device patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 21:28:12 +00:00
Jo-Philipp Wich f1c0febd72 [generic] add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 19:17:31 +00:00
Hauke Mehrtens f708e80573 kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-15 17:23:02 +00:00
Matteo Croce 034b97f4d8 ar71xx: add link detection on Ubiquiti devices WAN port
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:31:50 +00:00
Matteo Croce 4fb23de559 use correct macros and frame size in ag71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:10:06 +00:00
Matteo Croce 7c9631696d ar71xx: cosmetic fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:08:00 +00:00
Hamish Guthrie ec135c3d34 [omap35xx]: Add new defconfig and profile for es variant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 11:49:52 +00:00
Hamish Guthrie 4a58fa4ef6 [omap35xx] Squash uids
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 10:36:39 +00:00
Daniel Dickinson 7072b9d11f [x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 07:23:11 +00:00
Daniel Dickinson 685efe5852 Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 06:08:49 +00:00
Daniel Dickinson 6c5f918ef1 This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13 06:06:42 +00:00
Florian Fainelli 0da640db3b bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:34:14 +00:00
Florian Fainelli 93e4186e52 bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:50 +00:00
Florian Fainelli bc014cb9cd bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:45 +00:00
Florian Fainelli 2811523f2c bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 13:33:41 +00:00