6bcbd536ed
ar71xx: update to 3.10.1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 17:29:56 +00:00
a2013d3f7c
mac80211: b43: load b43 on core rev 17 and 18.
...
This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:23:04 +00:00
c57d29f977
mac80211: b43: activate LP-Phy support every time
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:13:32 +00:00
4cd2167005
brcm47xx: use b53 phy driver for the switch in kernel 3.10
...
This makes it possible to use swconfig to controll the switch.
This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:11:17 +00:00
c1bd015d31
ar71xx: use uimage split for WHR-HP-G300N
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:06:01 +00:00
56386d5666
ar71xx: use uimage split for dlrtdev
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:57 +00:00
191e61e4f7
ar71xx: use uimage split for Allnet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:53 +00:00
b41b7c54af
ar71xx: use uimage split for Cameo devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:50 +00:00
cb2f4a3084
ar71xx: use uimage split for DIR-825B1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:46 +00:00
50e69a1452
ar71xx: use uimage split for Embedded Wireless Dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:42 +00:00
3b000a1480
ar71xx: use uimage split for Ubiquiti XM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37297 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:39 +00:00
e53672309b
ar71xx: increase kernel size for wndr3700 based devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:35 +00:00
246ecf6b9d
ar71xx: use uimage split for WZR-HP-G300NH2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:31 +00:00
4fe58418fb
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:27 +00:00
482ed090de
ar71xx: use uimage split for WZR-HP-G300NH
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:23 +00:00
f551bccbe6
ar71xx: use uimage split for WZR-HP-G450H
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:19 +00:00
ec6d65280b
ar71xx: enable uimage split and use it for carambola2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:16 +00:00
6079393d55
ar71xx: remove linux 3.8
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:12 +00:00
aad55d92d6
ar71xx: move the watchdog driver to the kernel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:08 +00:00
215f8e9d8e
ar71xx: set linux 3.10 as default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 14:05:04 +00:00
d631e85a63
brcm47xx: add initial support for kernel 3.10
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:44:45 +00:00
652844194b
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:19:58 +00:00
5c482f63ea
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 13:10:22 +00:00
5b1af986f6
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:59:00 +00:00
fe0b737198
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37283 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:57:03 +00:00
4ea1473546
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37282 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:58 +00:00
6859bb2428
brcm47xx: do not change nvram without user interaction
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 12:56:42 +00:00
cd7c8bbe3d
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37280 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:30:31 +00:00
8ad163f6f5
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:28:37 +00:00
6d0a2d148e
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:26:35 +00:00
7ed2d05b94
busybox: disable features marked as broken ( #13782 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 11:00:59 +00:00
8dfaf53e4d
kernel: refresh patches for kernel 3.8.13
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:56 +00:00
6390b285e9
kernel: update to kernel 3.10.1 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:45:09 +00:00
460f420734
kernel: update to kernel 3.9.10 and refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:43:10 +00:00
f78f7471c9
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 22:29:53 +00:00
5791ea36fd
brcm47xx: proc gets mounted without this patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 21:42:19 +00:00
14e7f6fd43
brcm47xx: remove obsolete hotplug stuff
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37271 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 20:38:33 +00:00
c97fd7bf11
mac80211: tweak mac address allocation
...
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-13 11:39:48 +00:00
21201be1f4
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 13:46:27 +00:00
089d2c0e73
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 08:10:19 +00:00
5699aaac85
mac80211: merge a fix for PS-Poll handling, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 07:59:59 +00:00
1d38268af4
mac80211: remove bogus module params from compat.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37263 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-12 07:59:51 +00:00
0f44966ec8
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:53 +00:00
22369289cd
procd: update to latest git revision
...
this fixes a regression in the watchdog init code
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:43 +00:00
1eff8c3206
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37258 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:34 +00:00
7faed562d8
procd: make the log port default to 514 if none is specified
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 21:16:25 +00:00
1113ffd879
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:30 +00:00
79d759c52e
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:27 +00:00
ed61aa230e
kernel: make libsas depend on x86
...
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:22 +00:00
568ed0a9f3
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-11 20:56:19 +00:00
Felix Fietkau
Hauke Mehrtens
John Crispin