a72a8da790
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23 10:12:40 +00:00
c16de866d5
switch: ROBO Switch Gigabit MII Support
...
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD. This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.
In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex. I was not able to isolate the source of the problem
(this patch, driver or H/W limitation). The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).
I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-03 01:58:01 +00:00
24f8f16390
[package] switch: the hardware must be up while configuring
...
Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup,
leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 21:15:41 +00:00
ee6b31756a
switch: update for brcm47xx target
...
* remove suport for 2.4 kernel
* add support for bcma bus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-04 20:07:58 +00:00
d83ab218fe
[package] switch: fix switch-robo device reference counting
...
Fix incorrect device reference counting by switch-robo.
Signed-off-by: George Kashperko <george@znau.edu.ua>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-20 17:24:15 +00:00
33990405fb
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-12 14:06:13 +00:00
3bc5d6887d
remove linux 2.4 support from several packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21954 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 20:43:41 +00:00
12c8561736
[package] switch: explicitely clear port mappings in unsused vlans ( #7082 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 13:51:26 +00:00
a3b2c3c70b
[package] fix strange LED behavior with Netgear WGT634U ( #3552 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 10:27:46 +00:00
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
13a5bcb41b
[package] allow kmod-switch to be used on brcm63xx ( #4599 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-09 21:57:11 +00:00
a133f02be2
export switch-core.h to $(STAGING_DIR)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06 19:28:26 +00:00
6bcd07afdd
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
95f277fd2d
fix board name for nvram and switch packages on brcm-2.4 after [8653]
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 12:54:24 +00:00
2180fa92a1
move package description to a separate definition, remove it when DESCRIPTION=TITLE
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 08:34:51 +00:00
92558d67a4
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
43bb58eaf6
package Makefile cleanup: remove uneeded vars
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-03 08:20:36 +00:00
69ffd95c71
use a default VERSION field for kmod packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-02 16:39:27 +00:00
812529c2fa
fix kmod-switch compile on brcm-2.4 ( #1461 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 13:42:21 +00:00
153a864700
add diag and switch support for brcm47xx-2.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-14 01:19:24 +00:00
4fb96c5db6
cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-01-20 02:01:53 +00:00
5a32593057
replace lots of manual install commands with INSTALL_* variables
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 00:29:07 +00:00
768b48f380
implement target profiles in menuconfig
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-12 05:06:56 +00:00
5e7e06664c
standardize Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-09-23 19:23:09 +00:00
2ffe012ebb
set PATH in rules.mk
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-04 11:59:52 +00:00
d3a6fe9915
rewrite of the network scripts and configuration
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-07-30 03:09:09 +00:00
f9e5c1b1d5
credit where credit is due
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-27 00:35:46 +00:00
24cf53528f
add INCLUDE_DIR variable for $(TOPDIR)/include
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21 02:32:39 +00:00
08cbdbc1b0
build system cleanup. move shared include files into $(TOPDIR)/include, move lzma, mkfs.* into toolchain/
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-21 02:16:37 +00:00
c12c40f4a6
normalize Makefiles.
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-18 18:30:40 +00:00
2ec7843bec
move target/linux/package/switch to package/, fix a bug in the ipkg dependency handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-05-31 16:01:46 +00:00
Jonas Gorski
Hauke Mehrtens
Jo-Philipp Wich
Florian Fainelli
Claudio Mignanti
Felix Fietkau
Nicolas Thill
Mike Baker