Florian Fainelli
|
7514c06dc9
|
Fixup the hcd driver, add a start/stop/reset/sw_reset functions, should allow it to basically run
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8078 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-20 16:26:39 +00:00 |
Florian Fainelli
|
06a19c83ae
|
Fix wget2nand with the host's patch-cmdline and the new kernel filename
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8076 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-20 15:45:20 +00:00 |
Florian Fainelli
|
19d45d5634
|
compress the kernel that resides on the nand memory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8073 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-20 14:33:15 +00:00 |
Gabor Juhos
|
8c4ba24924
|
[adm5120] fix switch_driver to avoid segfaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8071 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-20 09:07:18 +00:00 |
Gabor Juhos
|
87d7b95fc2
|
[adm5120] update trxsplit
* use generic rootfs_split feature
* resync kernel config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8070 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-20 08:47:02 +00:00 |
Florian Fainelli
|
4261ab5ce2
|
Fix indentation for add_mtd_partitions (#2072)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8068 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 19:03:10 +00:00 |
Florian Fainelli
|
35fce15e1e
|
Remove tgz hacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8066 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 18:50:16 +00:00 |
Felix Fietkau
|
85c3d5e4f1
|
really fix tgz images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8065 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 18:20:56 +00:00 |
Gabor Juhos
|
28a162aa22
|
restore Kconfig options of rootfs_split for 2.6.21.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8064 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 17:15:32 +00:00 |
Florian Fainelli
|
4ca403bc3d
|
Suppress promc.c.orig, fix the nand detection with newer boards (#2038)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8063 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 16:19:19 +00:00 |
Florian Fainelli
|
70c4e98a10
|
revert 8059, via-rhine is built in the kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8061 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 16:00:20 +00:00 |
Gabor Juhos
|
ce6e7992de
|
rootfs_split fixes
* avoid compiler warnings on 2.6.22.1
* applies cleanly on 2.6.21.5
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8060 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 15:52:37 +00:00 |
Florian Fainelli
|
a210d33749
|
Include kmod-via-rhine by default for rb532
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8059 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 15:23:34 +00:00 |
Florian Fainelli
|
8e5e2d5996
|
Convert the NAND driver to platform_driver, allow tgz image to be built correctly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8058 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 14:53:24 +00:00 |
Florian Fainelli
|
48281586b9
|
Add wget2nand, this should allow netboot installation directly to nand
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8057 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 14:52:38 +00:00 |
Florian Fainelli
|
4b6b1e38d2
|
Really add the LED driver :)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8056 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 14:51:56 +00:00 |
Felix Fietkau
|
f5f5c87b75
|
disable ipt_quota on linux 2.4 - iptables user space no longer compiles with it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8055 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 14:29:05 +00:00 |
Florian Fainelli
|
925988727e
|
Put the init flag in the structure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8054 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 12:54:17 +00:00 |
Florian Fainelli
|
980002a679
|
rb532 has pci support and should build tgz images by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8052 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 12:27:40 +00:00 |
Florian Fainelli
|
34be0d067f
|
Allow the redboot supplied command line to be append (#2089)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8049 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 10:24:16 +00:00 |
Gabor Juhos
|
2a9a119244
|
clean of the rootfs_split patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8047 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-19 07:13:20 +00:00 |
Florian Fainelli
|
2489fedc07
|
Replace hardcoded values with their correct definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8046 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 17:27:40 +00:00 |
Florian Fainelli
|
85f88ca4be
|
Convert the nand driver to a platform_device, should only allow routerboards to use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8045 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 17:16:36 +00:00 |
Florian Fainelli
|
21259095f9
|
Fix the tgz image build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8042 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 14:40:57 +00:00 |
Florian Fainelli
|
e84915d1fc
|
The RB1xx profile should only provide tgz image and pci support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8041 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 14:22:46 +00:00 |
Florian Fainelli
|
36703bb8d8
|
Add a USES_TGZ config.in variable, so that RB1xx profiles can use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8039 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 14:11:44 +00:00 |
Florian Fainelli
|
5c13b4e22e
|
Add an ar7 tnetd7200 fix by DerAgo, thanks !
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8036 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 13:42:24 +00:00 |
Felix Fietkau
|
5864c8362f
|
add missing config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8035 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 13:42:04 +00:00 |
Florian Fainelli
|
f55ba3307f
|
Resync x86_64 kernel config and make uml build ext2 images by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8034 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 13:01:32 +00:00 |
Florian Fainelli
|
4f19d376a6
|
Upgrade uml to 2.6.22.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8033 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 12:43:34 +00:00 |
Florian Fainelli
|
ae55158a13
|
Load the appropriate MTD driver if we were booted from NOR/NAND only, use the TRX mapping by default if bootloader unknown
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8032 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 12:13:37 +00:00 |
Felix Fietkau
|
bfd5e6c8bf
|
disable a few things that are not packaged yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8030 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 12:02:17 +00:00 |
Felix Fietkau
|
cbd55fe6d7
|
dynamically enable/disable kernel config options for kmod packages based on build system config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8026 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-18 11:31:01 +00:00 |
Gabor Juhos
|
f192b6afc8
|
[adm5120] restore support for Infineon's EASY 5120 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8021 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 15:43:58 +00:00 |
Florian Fainelli
|
42aa5752e2
|
Preliminary support to bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8020 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 12:12:39 +00:00 |
Imre Kaloz
|
fda40cfa40
|
bump brcm63xx to 2.6.22.1, too
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8018 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 10:54:08 +00:00 |
Florian Fainelli
|
c9331c2485
|
Add diagnostic stuff to rb500
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8016 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 10:28:31 +00:00 |
Florian Fainelli
|
c8ad1db236
|
Upgrade rb500 to .22.1, add the LED driver from #986
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8015 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 10:25:18 +00:00 |
Florian Fainelli
|
891fd980a3
|
Add ipt_random module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8014 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 08:47:44 +00:00 |
Florian Fainelli
|
979eceef1c
|
Adm5120 NAPI polling support and fixes by Thomas Langer and Friedrich Beckmann
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8013 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 08:33:41 +00:00 |
Florian Fainelli
|
aeecf36e8b
|
Fix warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8012 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-17 08:32:29 +00:00 |
Felix Fietkau
|
67b10c9ee3
|
better support for handling various jffs2 eraseblock sizes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8011 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 22:06:45 +00:00 |
Florian Fainelli
|
b3956724d1
|
Remove the bogus pciutils dependency
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8007 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 18:18:20 +00:00 |
Felix Fietkau
|
fa6fff71c1
|
fix ipp2p
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8005 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 16:07:32 +00:00 |
Felix Fietkau
|
a9bc57f16e
|
add kernel_oldconfig target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8003 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 10:03:03 +00:00 |
Rod Whitby
|
13700242bb
|
ixp4xx/fsg3: Enabled the Winbond W83782D sensor for Freecom FSG-3 temperature sensing and fan control
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7998 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 05:37:50 +00:00 |
Felix Fietkau
|
ea2f9b7e7d
|
disable __must_check by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7996 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 05:20:28 +00:00 |
Rod Whitby
|
bd4aa271b9
|
Set ixp4xx network config to static 192.168.1.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7995 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 04:35:09 +00:00 |
Rod Whitby
|
450553852c
|
ixp4xx/NSLU2: Added devio to the NSLU2 profile (required for reflashing the kernel)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7994 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 04:00:21 +00:00 |
Rod Whitby
|
80209158bb
|
ixp4xx-2.6: Removed the network config override file, cause we agreed that ixp4xx images should behave like all other openwrt images. So ixp4xx images are static 192.168.1.1 on lan now instead of dhcp.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7991 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2007-07-16 03:30:02 +00:00 |