This file will contain common procedures to deal with network interfaces.
Initially provides network_get_ipaddr(), network_get_ipaddr6(),
network_get_subnet() and network_get_subnet6() to determine the
primary IP addresses or subnets of a given logical interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31935 3c298f89-4303-0410-b956-a3cf2f4a3e73
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31639 3c298f89-4303-0410-b956-a3cf2f4a3e73
hi
Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router)
I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option? Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31374 3c298f89-4303-0410-b956-a3cf2f4a3e73
- Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build
- Introduce include/version.mk to provide common helpers for packages dealing with versions
- Make opkg use version.mk to populate the opkg.conf template
- Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
The available placeholders are:
%D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
%d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
%N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
%n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
%V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
%v .. Like %V, but all characters made lowercase and spaces substituted with "_"
%C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
%c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
%U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages"
%R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
%T .. Replace with the current target (e.g. "ar71xx")
%S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31262 3c298f89-4303-0410-b956-a3cf2f4a3e73
To supply custom network settings, it is better to embed a complete network config file using the
files/ overlay, the old image lan preconfig options are also very limited in scope and actually collide
with sysupgrade and firstboot hardware detection on at least ar71xx and possibly other targets, therfore
drop this facility.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31258 3c298f89-4303-0410-b956-a3cf2f4a3e73
The muninlite postinst fails to add munin to /etc/services.
This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30982 3c298f89-4303-0410-b956-a3cf2f4a3e73
Solves broken key based dropbear login with empty password after r28935.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29130 3c298f89-4303-0410-b956-a3cf2f4a3e73
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28991 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add service_check function for checking if a process is alive
* add service_signal for sending arbitrary signals to a process
* change service_stop to send a TERM signal first, wait for the process to die and send a KILL signal if it doen't
* have service_kill print a warning on STDERR stating it has been deprecated
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28865 3c298f89-4303-0410-b956-a3cf2f4a3e73
Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk.
Also make code more readable by escaping that overly long line.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28616 3c298f89-4303-0410-b956-a3cf2f4a3e73
The rdate applet proved to be too unreliable to obtain the current time on boot:
- public time servers are rare and often unreachable or overloaded
- rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions
- the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations
- the time protocol as specified in RFC 868 is considered obsolete
This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly.
The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or
by clearing the timeserver list in /etc/config/system.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
Multiple IPv6 addresses should be handled with alias sections
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28240 3c298f89-4303-0410-b956-a3cf2f4a3e73
If a user invoked /sbin/ifup to bring up an interface, the setup used to fail
in case of wireless networks tied to a non-bridged interface definition.
Likewise, the bringup of "lan" in the default configuration will reinitialize
the bridge but do not re-join the wireless network to it, requiring an extra
call to /sbin/wifi (which might not be possible anymore due to a severed link
if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27720 3c298f89-4303-0410-b956-a3cf2f4a3e73
- option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz
- option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz
This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan.
Fixes ticket #8699.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27653 3c298f89-4303-0410-b956-a3cf2f4a3e73
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930 3c298f89-4303-0410-b956-a3cf2f4a3e73
when using an external toolchain the base-files package copies libc, libgcc and
others from the library directory.
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
--- Message Snippet ---
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libnss_files.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv-*.so': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libresolv.so.*': No such file or directory
cp: cannot stat `/home/user/Desktop/code/meetwise/toolchain/staging_dir/toolchain-arm_v5te_gcc-linaro_uClibc-0.9.32_eabi/./lib/libuClibc.so.*': No such file or directory
make[2]: *** [/home/user/Desktop/code/meetwise/openwrt/bin/at91/packages/libc_-68_at91.ipk] Error 1
make[2]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt/package/base-files'
make[1]: *** [package/base-files/compile] Error 2
make[1]: Leaving directory `/home/user/Desktop/code/meetwise/openwrt'
make: *** [package/base-files/compile] Error 2
--- /Message Snippet/ ---
To fix this unwanted behaviour I added an extra 'exit 0' to each for-loop and
make ignores non-existing files as before.
Signed-off-by: Sven Bachmann <dev@mcbachmann.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26623 3c298f89-4303-0410-b956-a3cf2f4a3e73
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.
This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26426 3c298f89-4303-0410-b956-a3cf2f4a3e73
Jo-Philipp Wich
Felix Fietkau
Gabor Juhos
Jonas Gorski
Mirko Vogt
Florian Fainelli
Nicolas Thill
Imre Kaloz
Vasilis Tsiligiannis
Daniel Dickinson