Gabor Juhos
911703d3d7
generic: ar8316: allow to configure port 6 via platform data on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:12:37 +00:00
Gabor Juhos
50709b5321
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:12:35 +00:00
Gabor Juhos
d81e6f3d37
ramips: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:11:13 +00:00
Gabor Juhos
7fe8ed80bf
package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:11:09 +00:00
Gabor Juhos
2463d0f9f9
ramips: convert to use {e,o}hci-platform driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:11:08 +00:00
Gabor Juhos
273d590697
generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers
...
Backport of upstream commits:
86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 12:11:06 +00:00
John Crispin
78b7242642
[netfilter] fix ipv4 nat on 3.7 by adding missing iptables modules
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 10:17:29 +00:00
John Crispin
6ee5434d24
[lantiq] ar9 did not load atm driver properly
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22 10:16:52 +00:00
John Crispin
a52f5c57e3
[lantiq] dont use input layer for gpio buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:20 +00:00
John Crispin
5a6b12149a
[lantiq] default switch setup for WBMR
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:12 +00:00
John Crispin
c2951f7a26
[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143 )
...
Tested only on the wbmr-hp-g300h, could affect/break other devices.
Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:04 +00:00
John Crispin
6a50405768
[lantiq] adds script to set wps info on boards with a wps button
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:03:59 +00:00
John Crispin
9e6f0ec839
[lantiq] minor tweaks to WBMR image
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:03:54 +00:00
John Crispin
d417c0b4fe
[gpio-button-hotplug] add OF binding
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:03:49 +00:00
John Crispin
99a3a72f11
[lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 14:41:35 +00:00
John Crispin
f0eac14112
[lantiq] fix typo inside fritz3370 devicetree file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 14:41:30 +00:00
John Crispin
e975fbe3fb
[lantiq] more devicetree fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:55 +00:00
John Crispin
3973731301
[lantiq] improve button handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:50 +00:00
John Crispin
2a00066a53
[lantiq] add phy-reset gpio handling to xrx200-net
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:44 +00:00
John Crispin
270bb4fee4
[lantiq] add more lantiq phy ids based on daniels uboot code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:40 +00:00
John Crispin
f4d889b9be
[lantiq] refresh patch and install v1.1 gphy blobs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:35 +00:00
John Crispin
211751d6f9
[lantiq] adsl firmware in wrong submenu
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:30 +00:00
John Crispin
3ac632e1dd
[lantiq] minor cleanup for adsl firmware handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:25 +00:00
John Crispin
a07a9a8200
[lantiq] properly symlink the adsl firmware
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34817 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:20 +00:00
John Crispin
29d0dc4ad3
[kernel] make to rtl8366_smi of binding use gpio_is_valid
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 13:47:14 +00:00
Mirko Vogt
1a59d79237
[package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade
...
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.
This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 12:10:21 +00:00
Gabor Juhos
27d7cb3077
kernel: add solos-pci update for 3.3
...
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.
Submitted more for the benefit of the AA branch than for trunk.
[juhosg: refresh the patch with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 10:38:33 +00:00
Gabor Juhos
826a0dfa53
rb532: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 19:25:43 +00:00
Gabor Juhos
53d06e738b
ramips: Add USB support for DAP-1350 platform.
...
It seems to work as intended, but only lightly tested.
Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 19:17:17 +00:00
Gabor Juhos
f82765d86f
rb532: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 19:09:03 +00:00
Gabor Juhos
9a1fec6f0b
rb532: switch to 3.6.11
...
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 19:09:01 +00:00
Gabor Juhos
85ab86e148
rb532: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 19:09:00 +00:00
Gabor Juhos
35eea507c9
ppc44x: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 18:11:22 +00:00
Gabor Juhos
d2984aef0d
kernel: add solos-pci patches from 3.8 for new hardware
...
[juhosg: refresh patches with quilt, skip the patch for 3.3]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 17:14:57 +00:00
Gabor Juhos
3d45fbcfe4
linux: add missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 17:14:56 +00:00
Felix Fietkau
5e0b3ba08e
kernel: fix module packages postinst by pointing to the new functions.sh location
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 15:29:37 +00:00
Felix Fietkau
b0c109fe11
docs: update remaining references to functions.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 15:29:33 +00:00
Luka Perkov
b0eb2879af
[package] base-files: we don't need /etc/functions.sh symlink anymore
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 15:15:30 +00:00
Gabor Juhos
88ab58eb94
cns21xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 14:51:17 +00:00
Gabor Juhos
a7efd844b7
ppc40x: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 14:51:16 +00:00
Gabor Juhos
e93294f5c0
ppc40x: add missing NULL terminator to avoid boot panic on PPC40x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 14:37:39 +00:00
Gabor Juhos
969434b252
ar71xx: rename fix-ar933x-reset patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 14:13:16 +00:00
Gabor Juhos
9cca4df461
ppc40x/44x: disable SWIOTLB
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-20 14:09:39 +00:00
John Crispin
2187917371
[lantiq] adds a fix for ar8216 mii detection on etop driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:20:24 +00:00
Mirko Vogt
4f4f7ca182
merge /lib/functions/boot.sh and /lib/functions.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:53 +00:00
Mirko Vogt
f1b359fecb
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:50 +00:00
Mirko Vogt
fd18877418
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:46 +00:00
Mirko Vogt
667779e4f8
change prefix for util-linux binaries from / to /usr
...
The prefix / causes executables like mount, umount, etc. to be placed
in /bin /sbin which therewith replace the busybox symlinks.
mount and umount e.g. are linked again libmount.so.
This is e.g. fatal during a sysupgrade, where /bin/mount,
/bin/umount, etc. but not libmount.so get copied into a ramdisk
which will result in non working executables within the ramdisk.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 16:07:42 +00:00
John Crispin
ffe3325930
[lantiq] minor basefiles fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 15:17:42 +00:00
John Crispin
bfed5c6801
[lantiq] fix gptu clocks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19 15:17:31 +00:00